Instruction/ maintenance manual of the product PixPro SP360 Kodak
Go to page of 47
User Manual Action Cam SP360.
1 Before Y ou Start Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: 141 1 W . 190th Street, Suite 550, Gardena, CA 90248, USA JK Imaging Europe, 71 Clarendon road, W atford, WD17 1DS, UK Company Website: www .kodakpixpro.com About this Manual Thank you for purchasing this product.
INDUSTR Y CANADA This device complies with Canadian RSS-210. This device complies with Industry Canada license-exempt RSS standard (s).Operation is subject to the following two conditions: (1) this de.
For Customers in the U.S.A. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This d.
4 Safety Notes Product Notes: • Donotdisassembleorattempttorepairtheproductbyyourself. • Dohandletheproductproperly .Thisproductmaybedamagedifdropped,puncturedorcrushed.
5 • Directlyeditingthedataonmemorycardisnotrecommended.Copythedatatoyourcomputerdiskbeforeeditingisrecommended. • Pleaseturntheproductoffbeforeremovingthememorycard.
6 Before Y ou Start ...................................................................................................................................... 1 Safety Notes .................................................................................
7 Modes Introduction .......................................................................................................................................... 22 Wi-Fi mode .............................................................................
8 Getting Ready Accessories Included Y our product box should contain the product you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer . (The AC Adapter style will vary according to the power requirement from different countries or regions.
9 Kodak PIXPRO SP360 V iew 1 2 3 4 5 6 7 11 8 9 10 12 8 13 14 10 1 Glass lens cover 2 Status indicator 3 Video recording button / Shooting button / OK button 4 NFC mark 5 Menu button / Direction butto.
10 Mounting / Removing Lens Cover Removing lens cover: T urn the lens cover according to the illustrated direction until it separates from the SP360. Mounting lens cover T urnandrmlytightenthelenscoveraccordingtotheillustrateddirection.
11 Installing Battery 1. Open the battery cover Push the battery cover lock from "LOCK" to "OPEN" along the direction of arrow ① , push the battery cover along the direction of arrow ② , and open the battery cover along the direction of arrow ③ .
12 Installing Memory Card Openthesidecover ,theninsertthememorycardintothecardslot(notethedirectionofthememorycardgap),pushthebottomendofthememorycardwithangertip into the slot completely , and then close the side cover .
13 Charging the Battery Pleaseusethebatterychargeror ACadaptertochargethebatteryinanambienttemperaturerangingfrom10˚Cto35˚C. Charging the battery with a battery charger: 1. Place the battery into the battery charger according to the direction illustrated.
14 Charging the Action Cam with a computer: 1. Place the battery into the Action Cam. 2. Use the Micro USB cable to connect the Action Cam to a computer (while the computer is on). 3. The indicator light will become orange while charging and will turn off automatically after charging is complete.
15 Conguration and Operation Main Screen Display Introduction Main screen displays under Wi-Fi mode Main screen displays under other modes 2 3 4 5 1 6 7 8 1. Mode Movie mode / Loop recording mode / / / / / T ime Lapse mode Snap Shot Photo mode Burst mode 2.
16 Power On / Off Power on: When the power is off, press and hold the button for more than one second to turn on the product. Power off: When the power is on, press and hold the button for more than one second to turn off the product.
17 Introducing the Menu 1. In the main screen (except for Wi-Fi mode), press the buttontoentertherst-levelmenuinterface,pressthe or button to select the item, and press the button to enter the corresponding secondary level menu interface.
18 General Settings V olume / Set the volume of the product. There are 2 options: • Enable • Off Power off / When this function is enabled, if there are no actions taken within a set time frame (except while recording or connected to Wi-Fi), the product will automatically shut down.
19 Movie Settings Unfold mode (for Movie mode / Loop recording mode / Time Lapse mode) Select from several different viewing ef fects. There are 5 options: • Dome * 1 • Front * 2 • Seg (Segment) * 1 • Ring * 1 • Panorama * 1 * 1 indicates that the default movie size corresponding to this option is (1440P30).
20 Time Lapse (for T ime Lapse mode) There are 6 options: • 1 second • 2 seconds • 5 seconds • 10 seconds • 30 seconds • 60 seconds T ime Lapse mode: • (960P50) or (720P60) or (480P60) or (480P120) cannot be selected.
21 Still Image Settings Unfold mode(for Snap Shot Photo mode / Burst mode) Select from several different viewing ef fects. There are 5 options: • Dome * 1 • Front * 2 • Seg (Segment) * 1 • Ring * 1 • Panorama * 1 * 1 indicates that the default photo size corresponding to this option is .
22 Modes Introduction In the main screen display , press the button to switch modes. 6 modes are available: Wi-Fi mode , Movie mode , Snap Shot Photo mode , Loop recording mode , T ime Lapse mode , Burst mode . Wi-Fi mode : THE ACTION CAM MUST BE SET T O Wi-Fi MODE IN ORDER T O BE CONNECTED T O AND OPERA TED FROM A PC OR A SMART DEVICE.
23 Wi-Fi mode Download and Install App ● Smart Device: Download the App installation package (App name: PIXPRO SP360) to your smart device from the path below , and install it by following the instructions on the interface.
24 Connect Action Cam to smart device (or PC) with Wi-Fi. When in Wi-Fi mode, press the button to immediately disconnect and exit Wi-Fi mode. 1. Action Cam: CheckSSID(ServiceSetIdentier)(PIXPRO-SP360_XXXX)andpassword (initial password: 12345678) indicated on the label in the battery compartment of the Action Cam.
25 Connect Action Cam to smart device with NFC 1. Enable NFC mode on your smart device. 2. Use your smart device to slightly touch the NFC mark on the Action Cam; if the smart device has a prompt tone or vibration, it means the connection is successful.
26 Movie mode Enables video recording. It is suitable for recording in most conditions. Operation method: Press the button to start recording. Repress the button to stop recording. Snap Shot Photo mode Enables photo shooting. It is suitable for recording in most conditions.
27 If the Action Cam was set to the Loop recording mode before shutdown, it will automatically start up and start recording when a Micro USB cable is connected to the Action Cam and an AC adapter (or to an external power supply).
28 Using Interfacing Micro USB interface Charging 13 Using an external power supply In case of low battery power , or when a long-term power supply is needed, an external power supply (AC adapter , vehicle power supply , portable power supply or other power unit) can be used instead of a battery .
29 3. The Action Cam will automatically shut down when the Micro USB cable is unplugged. The Action Cam supports Windows 8/7 and Mac OS X (V10.6.8~V10.9) systems. Ifthereisamemorycardinsertedintothe ActionCam,onlythelesinthememorycardwillberead.
30 Appendices Specications Designandspecicationsaresubjecttochangewithoutnotice. Image Sensor T ype 1/2.33" MOS Effective Pixels 16.36 Megapixels T otal Pixels 17.52 Megapixels Lens Focal Length 0.805mm Equivalentto35mmlm 8.
31 Splashproof Equivalent to JIS/IEC IPX5(Body) Shockproof Up to 2m Dustproof Equivalent to JIS/IEC (IP6X) Freeze-proong -10°C LCD 1.0 inch TN LCD Level Gauge 2-axis ISO Sensitivity Auto (100~800).
32 Prompts and W arning Messages Message Description Processing mode Therearetoomanyleswhichmaycauseadelaytopoweron. When pressing the button for shooting, the memory card cannot be accessed because there are too many folders.
33 Message Description Processing mode File processing (saving, formatting, etc.) time exceeds 2 seconds. User should do nothing. Connecting to the computer USB. Connecting to the HDMI device. The display will disappear after connection is successful.
34 T rouble Shooting Problem Possible causes Solution Product does not turn on The battery has been depleted. The battery is installed incorrectly . Charge the battery . Please follow the charging instructions in the manual to install the battery . Blurred images There is dirt on the lens or the glass lens cover .
35 Special Accessories There are different options of SP-360 accessories available. Accessory bundles vary per retailer . T o purchase additional accessories separately , please contact your local retailer customer service support, or visit www .kodakpixpro.
36 Standard Housing: For use with other accessories when waterproong is not required Installation method: 1. First, insert the adapter into the bottom of the standard housing before using the set screw to tighten. 2. Place the Action Cam inside the standard housing, and press the lock downward until it locks tightly .
37 W aterproof Housing: For use with other accessories underwater , in rain, on the seashore, or in other circumstances where waterproong is required Installation method: 1. First, insert the adapter into the bottom of the waterproof housing before using the set screw for tightening.
38 Flat Adhesive Mount: For tacking onto a skateboard or other at objects Installation method: Therearetwotypesofadhesivemounts:atandcurved.Y oumayselectbasedontheshapeoftheobjecttobe used.
39 Bar Mount: For mounting on bicycle handlebars, sailing masts, and other tube-like objects Installation method: 1. Assemble the standard or waterproof housing. ( 36 / 37). 2. Set the bar clamp to the handlebar and rotate the screws to tighten. Bar Clamp Screw 3.
40 Suction Cup Mount: For attachment to automotive windshields (or smooth surfaces) Installation method: 1. Assemble the standard or waterproof housing ( 36 / 37). 2. Assemble the adapter , pre-tightening nut and suction mount in accordance with the direction illustrated in the picture.
41 V ented Helmet Strap Mount-A: For mounting on hollow objects like bicycle helmets Installation method: 1. Align the locator pole on the mount to the locator hole on the Action Cam, and alignthescrewonthemounttothe ActionCam'stripodsocket.
42 V ented Helmet Strap Mount-B: For mounting on hollow objects like bicycle helmets Installation method: 1. Alignthemount’slocatorholewiththe ActionCam'slocatorholeandalignthe screwonthemountwiththe ActionCam'stripodsocket.
43 Head Strap Mount: For wearing on one’ s head Installation method: 1. Assemble the standard or waterproof housing ( 36 / 37). 2. Insert the base of the standard or waterproof housing to the mount before using the set screw to tighten. 3. Place the band around your head and tighten appropriately .
44 Surfboard Adhesive Mount: T o be tacked onto watersports equipment like surf boards Plane Support (Large) Plane Support (Small) Installation method: 1. Assemble the waterproof housing ( 37). 2. T ie one end of the rope to the plane support (small), and the other end to the waterproof housing.
45 Extended Arm: Y oucanaddoneortwoextendedarms(exceptheadstrapmount)toeachkit,toprovidemoreexibilitytoadjustthemountingangleofthe ActionCam. Supported accessories: Flat Adhesive Mount, Curved Adhesive Mount, Bar Mount, Suction Cup Mount, Surfboard Adhesive Mount.
Licensed Product T he K odak trademark and tr ade dress ar e used under license fr om Kodak. © 2014 b y JK Imaging Lt d. All rights reserv ed. JK Imaging L td. 14 11 W . 190th Street, Suite 550 , Gardena, CA 90 2 48, USA JK Imaging Eur ope, 71 Clarendon r oad, W atfor d, WD17 1DS, UK www .
An important point after buying a device Kodak PixPro SP360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak PixPro SP360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak PixPro SP360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak PixPro SP360 you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak PixPro SP360 will certainly help you make a decision on the purchase.
If you already are a holder of Kodak PixPro SP360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak PixPro SP360.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak PixPro SP360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak PixPro SP360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
