Instruction/ maintenance manual of the product E2752SHE AOC
Go to page of 61
L C D Monitor User Manual www .aoc.com ©201 3 AOC.All Rights Reserved. E2752S HE L ED Backlight 1.
Safety ...................................................................................................................................................................... 4 National Conv entions .....................................................
Service ............................................................................................................................................................. 5 8 W arr anty S tatement for Europe ................................................
Safety National Convention s The follo wing subsections d escribe notational conventions u sed in this do cum ent. Notes, Ca utions, and W arnings Throughout t his guide, blocks of text may be acco mpanied by an icon and pr inted in bold t ype or in italic type.
Power The monitor shoul d be operated on ly from the t ype of power source indicated on th e label. If you ar e not sure of the type of po wer supplied to your home, consu lt your dealer or l ocal power company . The monitor is equipped with a t hree - pronged grou nded plug, a plu g with a thi rd (grounding) pin.
Inst allation Do not place the m onitor on an unstable cart , stand, tripod, br acket, or table. If the monitor f alls, it can inj ure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufact urer or sold with this product.
Cleaning Clean the cabi net regularly with cloth . Y ou can use soft - det ergent to wipe out the stain, instead of strong - deterg ent which will cauterize the pr oduct cabinet . When cleaning , make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scrat ch the screen s urface.
Other If the product is emitting a strang e smell, sound or sm oke, disconnect the power plu g IMMEDIA TEL Y and contact a Service Cent er . Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage t he LCD monitor in sever e vibration or h igh impact cond itions during o peration.
Setup Contents of the box M onitor CD Manual Base USB Cable Power Cable Analog Cable HDMI Cable Audi o Ca bl e Not all signal ca bles ( Audio , Analog and HDMI cables) will be provided for all countries an d regions. Please check with the local d ealer or AOC branch office for confirmatio n.
Setup S t and & Base Please setup o r remove the base following the st eps as below . Setup: Remove: 10.
Adjusting Viewing A ngle For optimal vie wing it is recommend ed to look at the f ull face of the monit or , then adjust the monitor's angl e to your own preference . Hold the stand so you will not topple t he monitor when you change the mon itor's angle.
Connecting the Mon itor Cable Connect ions I n Back of Monitor and Comput er : 1. Power 2. HDMI 1 3. HDMI 2 4. D- SUB 5 . Audio T o protect equipment, al ways turn off the PC and LCD mon itor before conn ecting. 1. Connect the po wer cable to the AC por t on the back of t he monitor .
Adjusting Setting Optimal Resolu tion Windows V i st a For Windo w s V ista: 1 Click S T A R T. 2 Click CONTROL P ANEL. 3 Click Appear ance and Person alization.
5 Click Display Settings. 6 Set the resol ution SLIDE - B AR t o 1920 by 108 0 . 14.
Window s XP F or Windows XP: 1 Click S T A R T. 2 Click SETTINGS. 3 Click CO NTROL P ANEL. 4 Click Appear ance and Themes. 5 Double click DISPLA Y . 15.
6 Click SETTINGS. 7 Set the resolut ion SLIDE - B AR to 1920 by 1080 . Windows ME/2000 For Window s ME/2000: 1 C lick S T A R T. 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolut ion SLIDE - B AR to 1920 by 1080 .
Windows 8 For Windows 8 : 1. Right click and click A ll apps at the bottom-right of the screen. 2. Set the “ View by ” to “ Category ”. 3. Click Appearance and Person alization.
Click DISPLAY. 4. Set the resolution SLIDE-BAR to Optimal preset resolution 18.
Hotkeys 1 E CO(DCR)/- 2 V olume/+ 3 Source/Auto/E xit 4 Menu/Enter 5 Po wer Pow er Press the Power button to tur n o n/ off the monitor . V olume /+ When there is no OSD, P ress V olume butt on to active volume a djustme nt bar , Press - or + to adjust volume .
OSD Setting Basic and sim ple instructi on on the contro l keys. 1) Press the MENU- button to activate the OSD windo w . 2) Press - or + to navigate through the fu nctions. O nce the desir ed function is h ighlighted , press the M ENU - button to activate it .
L uminance 1 Press (Menu) to display men u. 2 Press or to select ( Luminance ), and press to enter . 3 Press or to select submenu , and pr ess to enter .
4 Press or to adjust . 5 Press to e xit . Brightness 0- 100 Backlight Adju stment Contrast 0- 100 Contrast from Digital -register. Eco mode Standard Standard Mod e Text Text Mode Internet Internet Mod.
Image Setup 1 Press (Menu) to display men u. 2 Press or to select ( Image Setup ), and press to enter . 3 Press or to select submenu , and pr ess to enter .
4 Press or to ad just . 5 Press to e xit . Clock 0- 10 0 Adjust pictur e Clock to reduc e Vertical - Lin e noise. Phase 0- 100 Adjust Pict ure Phase to re duce Horizontal - Line noise Sharpness 0- 100 Adjust pictur e sharpness H.Position 0- 100 Adjust the h orizontal posi tion of the pict ure.
Color Setup 1 Press (Menu) to display men u. 2 Press or to select ( Color Setup ), and pr ess to enter . 3 Press or to select submenu , and pr ess to enter .
4 Press or to adjust . 5 Press to e xit . Color setup. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Tempera ture from EEPR OM. Cool Recall Cool Co lor Temperatur e from EEPROM . sRGB Recal l SRGB Color Temperature from EEPROM.
Picture Boost 1 Press (Menu) to display men u. 2 Press or to select ( Picture Boost ), and press to enter . 3 Press or to select submenu , and pr ess to enter .
4 Press or to adjust . 5 Press to e xit . Frame Size 14 - 100 Adjust Frame Size Brightness 0- 100 Adjust Frame Brightness Contrast 0- 100 Adjust Frame Contrast H.
OSD Setup 1 Press (Menu) to display men u. 2 Press or to select ( OSD Set up ), and press to enter . 3 Press or to sel ect submenu , and press to enter .
4 Press or to adjust . 5 Press to e xit . H.Position 0- 100 Adjust t he h orizo ntal posi tion of OSD V.Position 0- 100 Adjust the vert ical position of OSD Timeout 5- 120 Adjust the OSD T imeout Tran.
E xtra 1 Press (Menu) to display men u. 2 Press or to select (Extra), and press t o enter . 3 Press or to select submenu , and pr ess to enter . 31.
4 Press or to adjust . 5 Press to e xit . 32.
Input Select Auto /Analog/ HDMI 1 /HDMI2 Select Inp ut Sig n al So urce Auto Config yes or no Auto adjust t he picture to defa ult O ff timer 0- 24hrs Select DC off time Image Rat io wide or 4:3 Selec.
Exit 1 Press (Menu) to di splay menu. 2 Press or to select (E xit ), and press to en ter . 3 Press to e xit Exit Exit the main OSD 34.
LED Indicator Sta tu s LED Color Fu ll Power Mode Green or Blue Active- off Mode Orange or red 35.
Driver Monitor Driver Window s 7 1. S tart Windo ws® 7 2. Click on the 'St art' button a nd then click o n 'Control Panel'. 3. Click on the 'Display' icon .
4.Ckick on the “ Change dis play settin gs ” button. 5. Click the “ Advanced Sett ings” butt on. 6. Click the “Monitor” tab and then c lick the “Properties” button.
7. Click the “Driver” tab. 8. Open the "Updat e Driver Sof tware - Generi c PnP Monitor" window by clicking o n “Update Dri ver ... “ and then click the "Browse my comput er for driver softw are" button. 9. Select "Let me pick from a list of device drivers on my compu ter" .
10. Click the “Ha ve Disk” butt on. Click on the “Brow se” button a nd navigate to the f ollowing dir ector y: X: Driver mo dule name (where X is t he drive letter designator f or the CD - ROM drive). 11. Select the " xxx .inf" file and click t he “Open” button.
Windows V i st a 1. Click "S tart " and "C ontrol Panel". Then, double - click on " Appearance an d Personalizat ion". 2. Click "Perso nalization" an d then "Displ ay Settings". 3. Click "Adv anced Settings.
4. Click "Prope rties" in the "Monitor" tab. If the "Properties" button is deacti vated, it means the configurati on for your m onitor is complet ed. The monitor can be us ed as is. If the message "Windows needs. .." is displaye d, as shown in t he figure belo w , click "Continue ".
Window s XP 1. S tart W indows® XP 2. Click on the ' S tart' button and t hen click on ' Control Panel'. 3. Select and cl ick on the cate gory ‘Appearan ce and Themes’ 4.
5. Select the 'S ettings' tab then click on the 'Advanc ed' button. 6. Select 'Monit or' tab - If the 'Propert ies' button is in active, it mean s your monitor is properly conf igured. Please stop installatio n.
8. Select the 'I nstall from a list or sp ecific location [ advanced] ' radio button and then click on the 'Next' butt on. 9. Select the 'D on't Search. I will choose the dr iver to install' r adio button. Then click on the ' Next' button.
Windows 8 1. S tart Windows® 8 2. Right click and click All app s at the bottom-right of the screen. 3. Set the “ V i ew b y ” to “Large icons” or “Small icons” . 4. Click on the “ Display ” icon. 5. Click on the “Change display settings” button.
Windows 2000 1. S tart Windows® 2000 2. Click on the ' S tart' button, point to 'Setti ngs', and then clic k on 'Control P anel'. 3. Double click on the 'Displa y' Icon. 4. Select the 'S ettings' tab then click on 'Advanced.
i- Menu Welcome to “i - Menu” soft ware by AO C. i - Menu makes it easy to adjust your monitor disp lay setting b y using on screen menus i nstead of the OS D button on the monit or . T o complet e installation, ple ase f ollow the installat ion guide.
e- Saver Welcome to us e AOC e - Saver monit or power manag ement soft ware! The AOC e - Saver features Smart Shu t do wn functions f or your monitor s, allo ws your monitor to timely shutdo wn when PC unit is at any st atus (On, Off, Sleep or Screen Saver) ; the actual shut down time dep ends on your prefer ences (see e xample below).
Screen+ Welcome to "Screen+" soft ware by AOC, Screen+ software is a desktop scr een splitt ing tool, it splits the deskt op into different panes, each pane dis plays a different window . Y ou only need to drag the window to a corresp onding pane, when you want t o access it.
T roubles hoot Problem & Quest ion Possible Sol utions Power LED I s Not ON Make sure the power button is ON and the Power Cor d is properl y connecte d to a grounded po wer outlet and to t he monitor . No images on th e screen I s the power cor d connected properl y? Check the po wer cord connect ion and power suppl y .
Monitor Is Stuck In Active Off- Mode" The Computer Po wer Switch shou ld be in the ON posit ion. T he Computer Video Card sh ould be snugly fitted in its slot. Make sure the moni tor's video cable is prope rly connected to t he computer . Inspect the mo nitor's video ca ble and make sur e no pin is bent.
S pecification General Specification Panel Model name E2752S HE Driving system TFT Color LCD Viewable Image Size 68.6 c m diago nal Pixel pitch 0.31 14 mm (H) x 0. 31 14 mm (V) Video R, G , B Analog lnt erface ,HDMI Separate Sync. H/V TTL Display Color 16.
Preset Display Modes St andard Resolution H. Frequency (kHz) V . Frequency (Hz) VGA 640x480@60H z 31.469 59.94 VGA 640x480@72H z 37.861 72.809 VGA 640x480@75H z 37.5 75 SVGA 800x600@56H z 35.156 56.25 SVGA 800x600@60H z 37.879 60.317 SVGA 800x600@72H z 48.
Pin A ssignment s Pin Number 15 - Pin Side of t he Signal Cable 1 Vid e o- R ed 2 Vid eo - Green 3 Vid eo - Blue 4 N.C. 5 Detect Cable 6 GND -R 7 GND -G 8 GND -B 9 +5V 10 Ground 11 N.
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Da ta 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + 18 +5V Power 3 TMDS Data 2 11 TMDS Clock Shield 19 Hot Plug Detec t 4 TMDS Data 1+ 12 TMDS Clock 5 TMDS Data 1Shield 13 CEC 6 TMDS Data 1 14 Reserved (N.
Regulat io n FCC Notice FCC Class B Radio Freq uency Interference Sta tement WA RNING : (FOR FCC CERTIFI ED MODELS) NOTE: This equipment has been tested an d found to compl y with the limits for a Class B digital device, pursua nt to Part 15 of the FCC Rules.
WEEE Declarati on Disposal of Waste Equipment by Users in Private H ousehold in the Eur opean Union. This symb ol on th e product or on its packagi ng indicates t hat this product must not be disp osed of with y our other household w aste.
Service W ar ranty S tatement for Eur ope EU WARRANTY FOR A O C M ONITORS LIMI TED THREE-YEAR WARRANTY* For AOC LCD Mon itor s so ld with i n Euro pe, AOC I nternat i onal ( Europe ) B.
W arranty St atem ent for North & South America (excluding Brazil) W ARRANTY ST A T EMENT for AOC Color M onitors Including th ose Sold within No rth America as S pecified Envision Peripherals, I nc.
ALL EXPRE SS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE W ARRANT IES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION TO A PERIOD OF THREE (3 ) YEARS FOR P ARTS AND LABOR AND O NE (1) YEAR FOR CRT TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE.
WARRANTY PERIOD COVERAGE AT NO CHARGE CUSTOMER CHARGES Within the first three months of purchase: Covered by EASE - New AOC monitor - Call tag dispatched and return freight charges via UPS - None* Bet.
An important point after buying a device AOC E2752SHE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AOC E2752SHE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AOC E2752SHE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AOC E2752SHE you will learn all the available features of the product, as well as information on its operation. The information that you get AOC E2752SHE will certainly help you make a decision on the purchase.
If you already are a holder of AOC E2752SHE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AOC E2752SHE.
However, one of the most important roles played by the user manual is to help in solving problems with AOC E2752SHE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AOC E2752SHE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
