Instruction/ maintenance manual of the product FC2 Kodak
Go to page of 10
©Eastman Kodak Company, 2005 Using the KODAK Negative Film Processing Cartridges FC1 and FC2 The KODAK Negat ive Film Processing Cart ridges FC1 and FC2 and KODAK Rinse Tablets are de signed for use in FUJI FP363SC and FP563SC Film Processors using process cycle CN-16S.
2 Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 OBTAINING THE CHEMICALS Catalog num bers are as f ollows: Product Min/Mult Order Qty CA T Nu mbe r KODAK Negative Film Pro.
Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 3 Bleach Tank (N2) Use KODAK Negative Film FC Tank Bleach, CAT No. 107 2024 . Each kit makes 3.6 litres of tank bleach solution. One kit is re quired to prepare the bleach tank in either the FP363SC pro cessor or the FP563SC processor.
4 Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 USING KODAK CONTROL STRIPS, PROCESS C-41, TO MONITOR THE PROCESS Use KODAK Control Stri ps, Process C-4 1, to monitor process perf ormance Each time y ou process a cont rol strip, position it i n the same location in the proce ssor.
Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 5 Additional Process CN-16S Adjustment Factors for Use w ith Process C-41 Contro l Strips Step R G B Yellow 0.00 0.00 0.00 D-max 0.00 0.00 +0.07 HD +0.04 0.00 +0.07 LD 0.00 0.
6 Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 HD-LD (Contrast ): This parameter monitors developer activity. Con trast is the primary indicator of developer agitation , oxidation, concentration, or contaminat ion. If the developer ta nk solution is under-agitated, too dilute, or oxidized, the plots will be low.
Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 7 D-min (Clear Area of Film): This parameter may monitor developer, bleach, or fixer problem s. If a develope r problem is indicat ed, see the HD-LD or LD parameter for c onfirmation and c orrective action.
8 Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 Figure 2 0 .05 .10 .15 .20 .25 + - .05 .10 .15 .20 .25 0 .05 .10 .15 .20 .25 + - .05 .10 .15 .20 .25 0 .05 .10 .15 + - .05 .10 .15 0 .05 + - .05 D-max B - Y B (+ 0.10 & 0.
Using the KODAK Negative Film Processing Cartridges FC1 and FC2 • CIS-254 9 Process CN-16S Reference Aim s Worksheet Date: Code: Red Green Blue D-max b Density Readings Control Strip Correction Fact.
Note: The contents of this publication are subject to change. To be sur e you have the most up-to- date publication, c heck www.kodak.c om/go/pho tochemicals; select Technical Information to find Current Information Summaries .
An important point after buying a device Kodak FC2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak FC2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak FC2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak FC2 you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak FC2 will certainly help you make a decision on the purchase.
If you already are a holder of Kodak FC2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak FC2.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak FC2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak FC2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
