Instruction/ maintenance manual of the product D-32 Kodak
Go to page of 10
D-32 Kodak Duplicating 2462/4462 Microfilm Kodak Direct Duplicating 2468/3468/4468 Microfilm Kodak Direct Duplicating Intermediate 2470 Microfilm Description Kodak Duplicating Microfilms are silver-halide films designed for making high quality duplicates of or igina l camera and othe r du plic ate microfilms.
2D - 3 2 Kodak Duplicating Microf ilm — 2462/4462 • Reverses image polarity ( neg-to-pos or pos-to-n eg) with convent ional proces sing • Blue spectral sensitivity • Medium contrast • Primar.
3D - 3 2 The following “duplication tree” illustrates how the various duplicating micr ofilms are used to produce the desired contrast an d imag e polarity of distribution copies. As an example, 3N is showing 3rd gener ation negative-appeari ng distribution copies.
4D - 3 2 Reciprocity dat a For the Direct Duplicating Microfilm s (x468 and 2470), tungsten exposures fro m 100 to 0.001 seconds, and processing in a Kodak Prostar Processor as recommended, recipr ocity failure is negligible and no correction is normally neede d.
5D - 3 2 Replenishment rates Development/transport time an d transport rates are set to achieve desired photogra phic aims; rep lenishment rate settings are determined by multiplying th e transport speed by the required replenishment rates for the appropriate film width b eing used.
6D - 3 2 ANSI ISO 1891 1 2000, Photography — Processed Safety Photographic Films-S torage Practices , gives appropriate con ditions for extended term (permanen t) and long-term sto ra g e film s. Inf or m at ion is also available in Kodak Publication D-31, S torage and Preservation of Microfilms .
7D - 3 2 Modulation transfer function curves Modulation transfer function The MFT curve was dete rmined using a method similar to that described in AN SI PH2.39-1977 (R1990), Photographic Modu lation T ransfer Function of Continuous-T one Black-and-Wh ite Photographic Films, Method of Measur ing .
8D - 3 2 Spectral sensitivity curves NOTE: While the data presented are typical of production co atings, they do not represent standards which must be met by Eastman Kodak Company . V arying storage, exposure, and pro cessing conditions will affect results.
9D - 3 2 Ordering information: Microfilms NOTE: Contact your Region al Sales Manager if you have any que stions. Code Mil Format Spec Description No/Case CA T No.
Ordering information: Chemicals Material Safety Data Sheets (MSDSs) on the chemicals (only) are available by calling: 1-800-242-2424, ext. 43. MSDSs are also available at: www .Ko dak.com/eknec . Y ou will need to supply the Kodak catalog number of the chemicals for which you need MSDSs.
An important point after buying a device Kodak D-32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak D-32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak D-32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak D-32 you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak D-32 will certainly help you make a decision on the purchase.
If you already are a holder of Kodak D-32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak D-32.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak D-32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak D-32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
