Instruction/ maintenance manual of the product 900 Kodak
Go to page of 10
User’s Guide A-6112 0 Part No. 1E8110 Multi-Feed Detector For use with the: Document Scanner 9500 Document Scanner/Microimager 990 Kodak Imagelink Scanners 900 and 923 Kodak Imagelink Microimager 70.
A-61120 March 1999 1 Us ing the Multi- Feed De tect or Introduction The Kodak Digital Science Multi-Feed Detector aids in document processing by detecting documents that may go through the feeder one on top of the other.
2 A-61120 March 1999 • Labels should be placed on the documents so they do not pass under the thickness sensor. If the labels on the document will pass under the thickness sensor, they must be less than or equal to ½-inch in length and spaced greater than 1 inch.
A-61120 March 1999 3 F72 Skew/Double Detection On/Off — allows you to use a function code to enable and disable the system. The lights do not change.
4 A-61120 March 1999 Operating the scanner with the Multi-Feed Detector enabled When the Multi-Feed Detector is enabled, the scanner is continuously checking documents for multi-feeds when the transport is running. When a multi-fed document is encountered, an error will be reported.
A-61120 March 1999 5 Retracting the thickness sensor Under normal circumstances, you should not need to adjust the thickness sensor manually. However, if you are feeding documents of mixed thickness or lightweight documents, you may need to manually retract the thickness sensor.
6 A-61120 March 1999 5. Close the front cover. 6. If desired, calibrate and re-enable the Multi-Feed Detector . See the section entitled, “Calibrating the Multi-Feed Detector ” for more information. Error recovery Error recovery methods are required when a multi-feed has been detected.
A-61120 March 1999 7 Batch/offline method Use the Batch/Offline method when your primary concern is efficient use of time, duplicates in the database do not represent a problem, and there is adequate space in the scanned image database or film roll for the duplicate images (same images with different sequential ID numbers and image addresses.
8 A-61120 March 1999 Both Multi-Feed Detector buttons are not constantly illuminated: Condition Cause Skewed document, not a multi-feed Encountered a skewed document. • • • • Press the green Run button to continue. Calibration — both lights continue to flash Document feed missed the sensor during calibration.
EASTMAN KOD AK COM PANY Doc um ent I m ag i ng Roc hester , N ew Y or k 14650 Kodak, Im agelink, Di git al Science and the ds monogr am sym bol are tradem arks of Eastm an Kodak Company. Print ed on re cycled pape r . A-61120 3/99 © Eastm an Kodak Com pany, 1999 Prin te d in U.
An important point after buying a device Kodak 900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak 900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak 900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak 900 you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak 900 will certainly help you make a decision on the purchase.
If you already are a holder of Kodak 900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak 900.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak 900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak 900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
