Instruction/ maintenance manual of the product 916SWA AOC
Go to page of 23
q 916Swa User Manual 1. Preface About This Guide This guide describes the monitor's features, setup, and operation. lnformation in this document is subject to change w ithout notice. The sections are as follows: • Safety Instructions : lists safety information.
Please link www.aoc.com , select your country or region, log in Product Registration to register . 2. Safety Introduction FCC Notice FCC Class B Radio Frequency Interference Statement WA RNING : (FOR .
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.
Adjusting Viewing Angle • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor's angle.
NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. Attaching the Cables Cable Connections On Back of Monitor and Computer 1.
Turn off your computer before performing the procedure below. 1. Connect the power cable to the AC port on the back of the monitor. 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the oth er end to the computer's D-Sub port.
1. Auto Config 2. Volume / - 3. Volume / + 4. Menu / Enter 5. Power Button & Indicator OSD Settings • Press the MENU-button to activate the OSD window. • Press+ or - to navigate through the function s. Once the desired function is highlighted, press the MENU-buttonto activate it.
DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology. Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: “Color Boost” and “Picture Boost” .
Five color-enhancement settings: To accommodate various display needs, Color Boost also offers 5 different color enhancement modes: Full Enhance, Natural Skin, Green Field, Sky Blue, and Auto-Detect. Please go to the fourth icon labeled “Color Boost” in the OSD menu and select one of the five settings yo u desire to be turned on.
Full Enhance: When "Full Enhance" is turned on, the color saturation of the entire screen is fully enriched, thus all colors become more vibrant . Nature Skin: When "Natural Skin" is turned on, the red and y ellow colors are enriched automatically, thus presents human skin with more natural and truer colors.
Sky Blue: When"Sky Blue" is turned on, the color blue is being fine-tuned so that the sky or ocean landscape will look more vivid and in-depth.
Demo: Screen divided into two for demonstration purposes. 2) How to use Picture Boost? Users can change the color settings of a self-selected zone on the screen. The size and positi on of th e selected zone can also be adjusted. "Pi cture Boost" is located in the fifth icon labeled "Picture Boost" in the OSD menu.
What is DCR? Dynamic Contrast Ratio (DCR) auto adjusts the brightness of the screen so users can see the darker areas of the display ed content in more depths. By increasing the darkness of the dark areas and the brightness of the bright areas, contrast ratio is upli fted to exceed 2000 :1.
DCR Demos: Disclaimer: DCR aftereffects are subject to the resolution and quali ty of the disp lay content, hence may look different than the above illu strations. Function Control Illustration Luminance Adjust Range Description Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register.
User-G Green Gain Digital-register. User-R Red Gain from Digital-register User-Y Yellow Gain from Digital-register User-C Cyan Gain from Digital-register User-M Magenta Gain from Digital-register Colo.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Foll ow these steps: 1. Remove the base. 2. Follow the manufacturer's instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the back of the monitor.
4. Insert the 4 screws into the holes and tighten. 5. Reconnect the cables. Refer to the user's manual that came wit h the op tional wall mounting arm for instructions on attaching it to the wall. 5. Drivers Windows 2000 1. Start Windows® 2000 2.
11. Click on the 'Open' button, then click the 'OK' button. 12. Select your monitor model and click on the 'Next' button. - If you can see the 'has not passed W indows® Logo testing to verify its compatibility with Windows® XP' message, please cli ck o n the 'Continue Any way' button.
Missing one of the primary colors (RED, GREEN, or BLUE) • Inspect the monitor's video cable and make sure that none of the pins arebent. • Make sure the monitor's video cable is properly connected to the computer. Screen image is not centered or sized properly • Adjust H-Position and V-Position or press hot-key (AUTO).
Temperature: Operating 0° to 50° Non-Operating -20° to 60° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 80% (non-condensing) Altitude: Operating 0~ 3000m (0~ 10000 ft ) Environmental Non-Operating 0~ 5000m (0~ 15000 ft ) EPA Energy STA R ® ENERGY STAR® is a U.
XGA 1024 X 768 60.023kHz 75.0Hz SXGA 1280 X 1024 64.0kHz 60.0Hz SXGA 1280 X 1024 74.4kHz 70.0Hz SXGA 1280 X 1024 77.9kHz 72.0Hz SXGA 1280 X 1024 80.0kHz 75.0Hz W XGA 1440 X 900 55.5kHz 60.0Hz W XGA 1440 X 900 70.6kHz 75.0Hz Pin Assignments Pin Number 15-Pi n Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.
Warranty Statement LIMITED THREE-YEA R W A RR ANTY* AOC Color Monitors sold wi thin Europe AOC Internat ional (Europe) G mbH warrants t his product t o be free from def ects in material and workm anship f or a period of T hree (3) years aft er the original date of consumer purchas e.
ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PROD UCT (INCLUDI NG THE W ARRANTIES OF MERCHANTABI LITY AND FITNESS FOR A PARTICULAR PUR POSE) ARE L IMITED IN DURATION TO A PERIOD OF TH REE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE.
An important point after buying a device AOC 916SWA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AOC 916SWA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AOC 916SWA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AOC 916SWA you will learn all the available features of the product, as well as information on its operation. The information that you get AOC 916SWA will certainly help you make a decision on the purchase.
If you already are a holder of AOC 916SWA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AOC 916SWA.
However, one of the most important roles played by the user manual is to help in solving problems with AOC 916SWA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AOC 916SWA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
