Instruction/ maintenance manual of the product UDR-HDMI Knoll Systems
Go to page of 2
Connecting Infrared: Infrared rec eivers and emitters can be connected on either side. Please note 12 volt power for the infrared is supplied on ly on the HDMI send or HD MI receive that has the PS1205 power suppl y connected.
Wiring: A send module (UDS-HDMI or US-HDMI) needs to be conn ected to a Knoll recei ve module (UDR-HDMI o r UR- HDMI) to work correc tly. The send and receive modul e are connected us ing two cat 5e or cat 6 wires using all 8 c onductors in each. Connecti on is made with the RJ45 connector (RJ45 plug not supplied).
An important point after buying a device Knoll Systems UDR-HDMI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Knoll Systems UDR-HDMI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Knoll Systems UDR-HDMI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Knoll Systems UDR-HDMI you will learn all the available features of the product, as well as information on its operation. The information that you get Knoll Systems UDR-HDMI will certainly help you make a decision on the purchase.
If you already are a holder of Knoll Systems UDR-HDMI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Knoll Systems UDR-HDMI.
However, one of the most important roles played by the user manual is to help in solving problems with Knoll Systems UDR-HDMI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Knoll Systems UDR-HDMI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
