Instruction/ maintenance manual of the product KWC-200 KitchenAid
Go to page of 4
DISPOSER INSTALLATION INSTRUCTIONS.
ELECTRICAL INSTALLATION INSTRUCTIONS: (115 Volt, 60 Hertz) I Follow your electrical code in all details. In older houses with limited circuits, or if it appears the circuit is heavily loaded, run a line directly to the main fuse box. 1. Remove the electrical access cover on the bearing bracket assembly.
GENERAL INSTRUCTIONS. 1. In old houses, it is generally good practice to clean out the existing drain line from, sink to sewer before installing the DISPOSER. 2. The disposer can be installed in steel, monel, stainless steel or cast iron sinks. with a sink opening of 3-l/2” to 4” without sink alteration.
WARNING This disposer must be properly grounded before operating, by connecting the chassis ground terminal to a suitable ground, com- plying with the National Electric Code and/or local electrical codes. KitchenAid Division Troy, Ohio 45374 Form 12664A (4-78) Printed in U.
An important point after buying a device KitchenAid KWC-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KWC-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KWC-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KWC-200 you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KWC-200 will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KWC-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KWC-200.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KWC-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KWC-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
