Instruction/ maintenance manual of the product DUAL 2722 Anton/Bauer
Go to page of 15
PowerCharger DUAL 2722 Charger / Power Supply OWNER’S MANUAL.
.
TABLE OF CONTENTS INTRODUCTION…………………………………………………………………....1 FEATURES………………………………………………………………………….
INTRODUCTION The DUAL 2722 is a simultaneous 2 position Interactive 2000 PowerCharger fast charger with 70 watt DC camera power supply. It incorporates all of the Logic Series circuits that are employed in ev ery Anton/Bauer charger.
SAFEGUARDS Power Sources: This unit was designed to operate at mains vol tages from 90 to 264 Volts AC, 50-60 Hz. Risk of Electrical Shock: Refer servicing to quali fied service personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Charging As with all Anton/Bauer chargers, chargi ng with DUAL 2722 is fully automatic. M ount any Digital Logic Series or Logic Se ries battery to the DUAL 2722 and it will automatically determine the appropriate ch arge routine and execute it.
Three Stage Charging Methodology In general, the DUAL 2722 will deliver a three stage charge routine to each battery. 1. Stage One will deliver a high rate charge matched to the capabilities of the battery (typi cally a one or two hour rate , depending on battery t ype).
LED Indications The DUAL 2722 has two sets of two LEDs (one red, one green) and one green st atus LED in the center. The green status LED indicates: Steady green – line voltage is present; Off – line voltage not present.. The red and green charge status LED’s indicat e the charging status of the battery.
1 - - - - - - - 2 - - - - - - - LCD Indications Each PowerCharger’s liquid crystal displa y (LCD) will display the status of each battery, as well as, important PowerCharg er operating indications. The fol lowing information expl ains the indications which appear in t he LCD.
DDM (DIAGNOSTIC/DISCHARGE MODULE) A standard feature with the DUAL 2722, the DDM completes a battery m anagement system, capable of testin g battery capacity and identifying battery anomalies before they appear in the field. The DDM will perform a standard or a 24 hour test .
To Operate The DDM 1. Mount the battery to any position on the PowerCharger. When the PowerCharger has completed its communication with the battery, the ALTERNATING RED and GREEN LEDs will stop and the battery will begin its char ge routine. The battery information and position number will appear on the LCD display.
“AUTOCAL” Feature When a DDM is installed in the PowerC harger, a special InterActive m ode is automatically enabled for DIGITAL batteries placed on the PowerCharger at any time.
OPERATION AS DC CAMERA SUPPLY FROM MAINS The DUAL 2722 can operate cameras and camcorders using t he four pin camera output connector located on the back of the DUAL 2722. To power the camera, attach one end of the XLR4 accessory cable (available separately) to the DUAL 2722.
FCC NOTICE This equipment has been tested and found to comply with the li mits for a Class A digital device pursuant t o Part 15 of the FCC Rules. These lim its are designed t o provide reasonable protection against harmful interference when the equi pment is operated in a comm ercial environm ent.
WARRANTY IMPORTANT: PLEASE MAIL WARRANTY REGISTRATION CARD WITHIN TEN (10) DAYS OF PURCHASE. We must ha ve this card on file with our Custom er Support Group to establish t his warranty. Proper registrati on will also enable us t o provide update inform ation on the battery syst em.
An important point after buying a device Anton/Bauer DUAL 2722 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anton/Bauer DUAL 2722 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anton/Bauer DUAL 2722 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anton/Bauer DUAL 2722 you will learn all the available features of the product, as well as information on its operation. The information that you get Anton/Bauer DUAL 2722 will certainly help you make a decision on the purchase.
If you already are a holder of Anton/Bauer DUAL 2722, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anton/Bauer DUAL 2722.
However, one of the most important roles played by the user manual is to help in solving problems with Anton/Bauer DUAL 2722. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anton/Bauer DUAL 2722 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
