Instruction/ maintenance manual of the product KOLS 7035 KitchenAid
Go to page of 32
Instructions for use.
.
Important safety instructions 4 Installation 8 Safeguarding the environment 9 EC Declaration of conformity 9 T roubleshooting Guide 9 After-Sales Service 10 Cleaning 10 Maintenance 11 Instructions for.
4 Important safety instructions Y OUR SAFETY AND THA T OF OTHERS IS P ARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety , which alerts users to potential risks to themselves and others.
5 • For installation to comply with current safety regulations, an all-pole disconnect switch with minimum contact gap of 3 mm must be utilized. • Do not use multiple plug adapters or extension leads. • Do not pull the power supply cable in order to unplug the appliance.
6 heating elements. Children less than 8 years old shall be kept away , unless continuosly supervised. • During and after use, do not touch the heating elements or interior surfaces of the appliance - risk of burns.
7 fire upon coming into contact with the electrical heating element. • Never use steam cleaning equipment. • Do not touch the oven during the pyrolysys cycle. K eep children away from the oven during the pyrolysis cycle.(only for ovens with Pyrolisis function).
8 After unpacking the oven, make sure that it has not been damaged during transit and that the oven door closes properly . In the event of problems, contact the dealer or your nearest After -Sales Service. T o avoid any damage, only remove the oven from its polystyrene foam base at the time of installation.
9 Safeguarding the environment Disposal of packing materials • The packaging materials are 100% recyclable and are marked with the recycling symbol () . • The various parts of the packing must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.
10 Before contacting the After-Sales Service: 1. See if you can solve the problem yourself with the help of the suggestions given in the "T roubleshooting guide". 2. Switch the appliance off and then on again it to see if the problem has been eliminated.
11 - Use safety gloves. - Ensure the oven is cold before carrying out the following operations. - Disconnect the appliance from the mains power supply . REMOVING THE DOOR T o remove the door: 1. Open the door fully . 2. Lift the catches and push them forwards as far as they will go (fig.
12 FOR ELECTRICAL CONNECTION, SEE THE P ARAGRAPH ON INST ALLA TION 1. Control panel 2. Upper heating element/grill 3. Cooling fan (not visible) 4. Dataplate (not to be removed) 5. Lamps 6. Circular heating element (not visible) 7. Fan 8. Rotisserie (if supplied) 9.
13 ACCESSORIES SUPPLIED A. WIRE SHELF (n. 2) : the wire shelf can be used to grill food or as a support for pans, cake tins and other ovenproof cooking receptacles. B. DRIP TRA Y (n. 1): the drip tray is designed to be positioned under the wire shelf in order to collect fat or as an oven tray for cooking meat, fish, vegetables, focaccia, etc.
14 INSERTING WIRE SHEL VES AND OTHER ACCESSORIES IN THE O VEN The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional removal. 1. Insert the wire shelf horizontally , with the raised part "A" upwards (fig.
15 LIST OF FUNCTIONS After switching on the oven, press the symbol and the display will show the following indications. A. Symbol for highlighted function B.
SETTING THE TEMPERA TURE/OUTPUT OF THE GRILL T o change the temperature or output of the grill, proceed as follows: 1. Check that the cursor is positioned next to the temperature value (zone 1); press button to select the parameter to be changed: the temperature values flash.
17 SELECTING OVEN PREHEA TING If you do not wish to preheat the oven, for those functions which allow it, simply change the oven's default selection as follows: 1. Using buttons and , move the cursor to preheating. 2. Press button to select the setting: "Y es" flashes on the display .
18 SETTING COOKING TIME This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by the selected function, after which the oven switches off automatically . 1. T o select the function, position the cursor next to "COOK TIME" using the buttons and .
19 SETTING END OF COOKING TIME /DELA YED ST ART The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only be done once cooking time has been set. This setting is onlypossible when preheating is not required for the selected function.
20 TIMER This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta. The maximum time which can be set is 1 hour 30 minutes. 1. With the oven off , press button : the display will show "00:00:00".
21 MEA T PROBE The meat probe supplied allows you to measure the exact core temperature of food during cooking, between 0°and 100°C, in order to ensure that food is cooked to perfection. Based on the food being cooked, the required core temperature can be set.
22 FA VOURITES This oven allows you to memorize the settings used to cook your favourite dishes. At the end of cooking, if you wish to save the settings used (function, time, temperature...), press the button . At this point, the display shows the message "Press to save".
23 Functions description table MAIN MENU Function Function Description of Function SETTINGS Setting the display (language, time, brightness, volume of acoustic signal, energy saving function) PROFESSIONAL FUNCTIONS - Roasting Bakery Pa st r y Specific functions for the type of dish chosen, with the ideal temperature recommended.
24 Functions description table SPECIAL FUNCTIONS Function Function Description of Function DEFROST T o speed up defrosting of food. Place food on the middle shelf. Leave food in its packaging in order to prevent it from drying out on the outside. KEEP W ARM For keeping just-cooked food (e.
25 Cooking table Rec ip e Function Preheating Shelf (from bottom) T emperature (°C) Time (min) Accessories Leavened cakes YES 2-3 160 - 180 30 - 90 Cake tin on wire shelf – 1-4 160 - 180 30 - 90 Sh.
26 Cooking table Rec ip e Function Preheating Shelf (from bottom) T emperature (°C) Time (min) Accessories Frozen pizza – 3 250 10 - 20 Shelf 3: drip tray / baking tray or wire shelf – 1-4 230 - .
27 Cooking table Rec ip e Function Preheating Shelf (from bottom) T emperature (°C) Time (min) Accessories Roast chicken 1-1.3 Kg – 2 Mid 55 - 70 Shelf 2: wire shelf (turn food two thirds of the wa.
28 T able of T ested Recipes (in compliance with IEC 50304/60350:2009-03 and DIN 3360-12:07:07) Rec ip e Function Preheating Shelf (from bottom) T emperature (°C) Time (min) Accessories and notes IEC 60350:2009-03 § 8.
29 The cooking table advises the ideal function and cooking temperature to ensure the best results with all recipes. If you wish to cook on one shelf only using the convection bake function, place food on the third shelf and select the temperature recommended for the "FORCED AIR" function when cooking on more than one shelf .
30 Recommended use and tips Meat - Use any kind of oven tray or pyrex dish suited to the size of the piece of meat being cooked. For roast joints, it is best to add some stock to the bottom of the dish, basting the meat during cooking for added flavour .
.
5019 710 01137 Printed in Italy n 03/12 GB.
An important point after buying a device KitchenAid KOLS 7035 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KOLS 7035 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KOLS 7035 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KOLS 7035 you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KOLS 7035 will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KOLS 7035, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KOLS 7035.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KOLS 7035. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KOLS 7035 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
