Instruction/ maintenance manual of the product VSK-2450P Antec
Go to page of 13
VSK ‐ 2450 U SER ’ S M ANUAL.
1 T ABLE OF C ONTENTS I NTRODUCTION 1.1 Case Specifications.…..…………… ………………………………………… ………………………….. 3 1.2 Diagram……………………………… ……………………………… …….
2 VSK ‐ 2450 U SER ’ S M ANUAL At Antec, we continually refin e and improve our products to ensure the highest quality.
3 1.1 C ASE S PECIFICATIONS Case Type Mid Tower Color Black Dimensions 450mm (H) x 200mm (W) x 470mm (D) 17.7” (H) x 7.9” (W) x x 18.5” (D) Weight 11.
4 1.3 P OWER S UPPLY S PECIFICATIONS The VSK ‐ 2450/VSK ‐ 2450P is powered by a VP ‐ 450/VP ‐ 450P power supply.
5 H ARDWARE I NSTALLATION G UIDE 2.1 S ETTING U P 1. Place the case upright on a flat, stable surface with the rear of the case facing you.
6 2.4 M OTHERBOARD I NSTALLATION 1. Lay the case down, with the open side facing up. The drive cages and power supply should be visible. 2.
7 Pin Signal Names Pin Signal Names 1 USB Power 1 2 USB Power 2 3 Negative Signal 1 4 Negative Signal 2 5 Positive Signal 1 6 Positive Signal 2 7 Ground 1 8 Ground 2 9 Key (No Connection) 10 Empty Pin 2.6 E XTERNAL 3.5” D EVICE I NSTALLATION There is one 3.
8 Pin Signal Names (HDA) Pin Signal Names (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC Power 4 AVCC 4 N C 5 FRO-R 5 Line Out (R) 6 MIC2_JD 6 Line Out (R) 7 F_IO_SEN 7 N C 8 Key (no pin) 8 Key (no pin) 9 FRO-L 9 Line Out (L) 10 LINE2_JD 10 Line Out (L) 3.
9 3.4 R EWIRING M OTHERBOARD H EADER C ONNECTIONS There may come a time when you need to reconfigure the pin ‐ out of a motherboard header connector.
10 C OOLING S YSTEM 4.1 T WO C OOL ™ F ANS Rear TwoCool™ Fan – There is a 120 x 25mm Two ‐ Cool™ fan preinstalled at the rear of the case.
11 4.3 O PTIONAL F ANS There are a total of two optional 120mm fan mounts— two front intake fans (at the front of the HDD cage).
12 Antec, Inc. 47900 Frem ont Blvd. Fremont, CA 94538 USA tel: 510 ‐ 770 ‐ 1200 fax: 510 ‐ 770 ‐ 1288 Antec Eu rope B.
An important point after buying a device Antec VSK-2450P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec VSK-2450P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec VSK-2450P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec VSK-2450P you will learn all the available features of the product, as well as information on its operation. The information that you get Antec VSK-2450P will certainly help you make a decision on the purchase.
If you already are a holder of Antec VSK-2450P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec VSK-2450P.
However, one of the most important roles played by the user manual is to help in solving problems with Antec VSK-2450P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec VSK-2450P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
