Instruction/ maintenance manual of the product KHGH 7510/I KitchenAid
Go to page of 16
KHGH 7510/I Instructions for use 5019_719_01000_GB 16-07-2007 10:23 Pagina 1.
5019_719_01000_GB 16-07-2007 10:23 Pagina 2.
Product description and symbols 4 Using the burners 4 Practical advice on using the hob 5 Positioning the pan supports and wok suppor t 5 Hood and cabinetry clearances (mm) 6 Injectors table 6 Safegua.
1. Removable pan supports 2. 1kWh auxiliary burner 3. 1.65kWh semi- fast burner 4. 1.65kWh semi- fast burner 5. Professional wok burner 6. Auxiliary burner control knob 7.
Read the instructions to get the best out of your hob. - Use pans with a similar diameter to the burner (see the table on this page) - Use flat bottomed pans except with the wok support. - Do not use excessive water when cooking foods and use the lid.
If a hood is to be installed above the hob, refer to the hood installation instructions to ensure the correct height above the hob Note: If the distance “ A ” between the wall cupboards in the kitchen is between 600mm and 730mm, the height “B” must be at least 530mm.
T o get the most out of your hob, please read the instructions carefully and keep them for future consultation. • These instructions are only valid in the countries whose destination symbol is shown on the serial number plate on the hob.
P acking The packing material is 100% recyclable and is labelled with the recycling symbol . Please dispose of all packing responsibly and carefully . Product This appliance is marked according to the European Directive 2002/96/EC, W aste Electrical and Electronic Equipment (WEEE).
T echnical information for the installer • This appliance can be built into a 20mm to 40mm thick worktop. • If no oven is to be installed below the hob, a panel must be fitted under the hob to prevent hob damage and protect the cupboard contents.
The electrical connections must comply with current legislation and be carried out by a qualified, competent person. • Information on the voltage and power absorbed are shown on the serial no. plate. • The appliance must be earthed. • When installing the appliance, we recommend that this hob is protected by a 3mm bi-polar switch.
Note: Refer to the table on page 6 to ensure the correct type of injector is to be fitted. T raditional burners (T) 1. Remove the pan supports ( A ) . 2. Remove the burners ( B ) . 3. Unscrew the injector ( C ) with a box spanner 7. 4. Replace the injector with the one for the new gas.
T o fit the double crown wok burner: Insert in the following order: 1. burner ring ( A ); 2 . decorative covering ring ( B ); 3. external burner cap ( C ); 4. internal burner cap ( D ). Note: make sure that: 1. the locating pin for the burner ring ( A ) is inserted correctly in the slot on the burner unit.
Always disconnect the hob from the electrical power supply and wait until it cools before cleaning and/or doing maintenance work. In order to keep your hob in good condition, you must keep it clean, removing any remaining food each time you use it.
If the hob is not working properly work through the this guide before contacting our Customer Care Centre. The burner does not ignite, or the flame is unsteady? Check that: 1. the gas, or electricity supply has not been interrupted and that the control knob is turned fully on.
5019_719_01000_GB 16-07-2007 10:23 Pagina 15.
5019 719 01000 Printed in Italy n 07/07 GB Whirlpool Europe S.r .l. Viale G. Borghi, 27 - 21025 Comerio (V A) Phone 0332.759111 - Fax 0332.759268 www .
An important point after buying a device KitchenAid KHGH 7510/I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid KHGH 7510/I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid KHGH 7510/I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid KHGH 7510/I you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid KHGH 7510/I will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid KHGH 7510/I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid KHGH 7510/I.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid KHGH 7510/I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid KHGH 7510/I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
