Instruction/ maintenance manual of the product TP-650C EC Antec
Go to page of 7
1 TP - 650C POWER SUPPL Y USER’S MANU AL V1.1.
2 TP - 650C Antec’s TruePower Classic series sets new standards for power supplies. Tr uePower Classic is one of the first series to comply with the toughest energ y s tandard available, ErP Lot 6: 2013.
3 80 PLU S® CERTIFICATION 80 PLUS® certification is the most widely recognized independent standard in power supply efficiency. An 80 PLUS® certified power supply uses less energy and generates less heat to stay cooler, run quieter an d last longer.
4 TABLE 2 Cable Quantity Connector s +12V Rail Description 1 X 1 +12V1 24(20+4)-pin Moth erboard 1 X 1 +12V1 8(4+4)-pin ATX12V/E PS12V 2 X 2 +12V2 8(6+2)-pin PCI-E 1 +12V1 Molex + FDD X 3 X 1 2 X 3 +1.
5 INSTALLATION Install the PSU into either the top or bottom o f your case with the four screws provided. Refer to your case manual if you are unsure where the power supply should be installed . Connect the 24-pin main power connector to your motherboard.
6 Connect the AC power cord to the power supply AC inlet. Be sure to use t he heavy -duty cord supplied with your PSU. PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient, making the hardwired connector the preferred choice.
7 Technical Suppor t: www.antec.com/ support USA & Canada 1-800-22ANTEC nasupport@antec.com Europe +31-(0)10-4622060 eusupport@antec.com Asia +886 (0)800- 060 -696 apsupport@antec.com Visit us on Facebook for contests, informa tion & support USA & Canada facebook.
An important point after buying a device Antec TP-650C EC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec TP-650C EC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec TP-650C EC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec TP-650C EC you will learn all the available features of the product, as well as information on its operation. The information that you get Antec TP-650C EC will certainly help you make a decision on the purchase.
If you already are a holder of Antec TP-650C EC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec TP-650C EC.
However, one of the most important roles played by the user manual is to help in solving problems with Antec TP-650C EC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec TP-650C EC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
