Instruction/ maintenance manual of the product Titan 650 Antec
Go to page of 7
TIT A N 5 5 0 U SER’ S MANU AL.
2 The high quality of our products is assured by a continuous process of refinement of their technical features. Therefore, it is possible that your product ma y differ in some respect from the descriptions contained in this manual. This is not a problem – it is an improv ement.
3 5. T o remove the front bez el. There are three plastic tabs on the left side of the bezel. Release them from the top do wn to detach the bezel from the metal chassis . Swing the bezel open to about 90º angle and gently lift it upward. The front bezel will come off easily .
The power supply is also equipped with a 3-pin fan signal connector . Connect it to one of the fan connectors on your motherboard. Y ou may monitor the speed of the rear power supply fan through your motherboard BIOS or through the monitoring software that’ s supplied with your motherboard.
5 CONNECTING THE AUDIO POR TS There is an Intel standard 10-pin connector (with also 7 individual wires with connectors) coming out from the front panel speaker and microphone connection. If your motherboard supports Intel’ s standard onboard audio connector, y ou can plug in the 10-pin connector directly onto the board.
T o install a f loppy or other external 3.5" device to the 5.25" to 3.5" Adapter : 1. Slide the adapter out. 2. Place the drive in the adapter and fasten it with the screws pro vided. 3. Find a 4-pin f loppy power connector on the po wer supply and connect it to the male 4-pin connector on the devices .
Antec, Inc. 47900 Fremont Blv d. Fremont, CA 94538 T el: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V . Sydneystraat 33 3047 BP Rotterdam The Netherlands T el: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 T echnical Suppor t US & Canada 1-800-22ANTEC CustomerSupport@antec.
An important point after buying a device Antec Titan 650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec Titan 650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec Titan 650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec Titan 650 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec Titan 650 will certainly help you make a decision on the purchase.
If you already are a holder of Antec Titan 650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec Titan 650.
However, one of the most important roles played by the user manual is to help in solving problems with Antec Titan 650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec Titan 650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
