Instruction/ maintenance manual of the product SMARTPOWER 2.0 Antec
Go to page of 4
Manuel de l’utilisateur / Anwenderhandbuch Manuale per l’operatore / Manual del usuario User’s Manual Make the SMART POWER 2.0 THE SMARTER CHOICE smarter choice.
10 Manual del usuario de Antec SmartPower 2.0 Fuente de alimentación ATX12V versión Modelos: SP-350, SP-400, SP-450 La serie SmartPo wer 2.0 de fuentes de alimentación cumple la última especificación A TX12V versión 2.
11 4. Extraiga la fuente de alimentación existente de la caja del ordenador e instale la nueva fuente de alimentación Antec. 5. Nota (NO se aplica a los modelos diseñados para la Unión Europea): Antes de instalar la nuev a fuente de alimentación, compr uebe el inter r uptor de tensión rojo de la fuente de alimentación.
Antec, Inc. 47900 Fremont Blv d. Fremont, CA 94538 T el: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V . Sydneystraat 33 3047 BP Rotterdam The Netherlands T el: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 T echnical Suppor t US & Canada 1-800-22ANTEC CustomerSupport@antec.
An important point after buying a device Antec SMARTPOWER 2.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec SMARTPOWER 2.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec SMARTPOWER 2.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec SMARTPOWER 2.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec SMARTPOWER 2.0 will certainly help you make a decision on the purchase.
If you already are a holder of Antec SMARTPOWER 2.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec SMARTPOWER 2.0.
However, one of the most important roles played by the user manual is to help in solving problems with Antec SMARTPOWER 2.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec SMARTPOWER 2.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
