Instruction/ maintenance manual of the product SLK2650-BQE Antec
Go to page of 4
User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario SLK2650-BQE.
Installing the Motherboard This manual does not cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. Lay the case down, with the open side facing up. The drive cages and power supply should be visible.
connectors to the appropriate headers on your motherboard. You can use the LED I and LED II connectors as you see fit; as SCSI LED, Message LED, etc. or any other function supported by your motherboard, expansion cards, and peripherals.
6 recommend that you also install a NoiseKiller™ 80 kit. The rear fan is installed so that the air blows out of the case. Find a large 4-pin peripheral connector on the power supply and connect it to the male 4-pin connector on the fan. The front fan (optional) should be installed so that the air is blowing into the case from the front.
An important point after buying a device Antec SLK2650-BQE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec SLK2650-BQE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec SLK2650-BQE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec SLK2650-BQE you will learn all the available features of the product, as well as information on its operation. The information that you get Antec SLK2650-BQE will certainly help you make a decision on the purchase.
If you already are a holder of Antec SLK2650-BQE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec SLK2650-BQE.
However, one of the most important roles played by the user manual is to help in solving problems with Antec SLK2650-BQE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec SLK2650-BQE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
