Instruction/ maintenance manual of the product Signature 650 Antec
Go to page of 8
USER’S MANUAL.
1 Antec Signature Series SG-650 and SG-850 Power Supply A New Level of Quality The Signature Series is Antec’s premium line of high-end performance power supplies. Combining cutting-edge technology, rigid testing, and impeccable style, the Signature series is the ultimate choice in power supplies.
2 System Protection A variety of industrial-grade safety circuitry will help protect your computer: OVP (Over Voltage Protection), SCP (Short Circuit Protection), and OCP (Over Current Protection). Sometimes the PSU will “latch” into a protected state.
3 Table 1 Cable Quantity Power Connectors Part Name Description N/A Power supply Direct cabling 24-pin (20+4) main connector 4-Pin ATX 12V 8-pin EPS 12V SG-650: 1 x 8-pin (6+2) PCI-E SG-850: 2 x 8-pin.
4 Installation: Install the Signature PSU into your case with the four screws provided. Connect the 24-pin Main Power Connector to your motherboard. If your motherboard uses a 20-pin connector, detach the 4-pin section on the 24-pin connector. Note : The detachable 4-pin section cannot be used in place of a 4-pin +12V connector.
5 Connect the 8-pin or 4-pin connector for the CPU. Note : Please also refer to your motherboard user guide for any special instructions. Connect the cables from cable pack to the socket on the power supply as needed. If you are going to plug additional PCI-E cables into the PSU, they should go into the red sockets.
6 Voltage +3.3V +5V +12V 1 +12V 2 +12V 3 -12V +5VSB Maximum Load 25A 25A 22A 22A 25A 0.5A 3A Minimum Load 0A 0A 0A 0A 0A 0A 0A Regulation ±3% ±3% ±3% ±3% ±3% ±7% ±3% Ripple & Noise (mV) 50 50 120 120 120 120 50 Combined max. 140W 516W (43A) N/A N/A Total Power 650W continuous output @ 50°C Output — SG-650 Voltage +3.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec Signature 650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec Signature 650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec Signature 650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec Signature 650 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec Signature 650 will certainly help you make a decision on the purchase.
If you already are a holder of Antec Signature 650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec Signature 650.
However, one of the most important roles played by the user manual is to help in solving problems with Antec Signature 650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec Signature 650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
