Instruction/ maintenance manual of the product PHANTOM 500 Antec
Go to page of 21
PHANTOM 500 User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario.
2 The high quality of our products is assured by a continuous process of refinement of their technical features. Therefore, it is possible that your product may differ in some respect from the descriptions contained in this manual. This is not a problem – it is an improvement.
Power Switch: This power supply includes a main power switch. Make sure you turn the switch to the ON ( I ) position before you boot up your computer for the first time.
4 Position 3: "Virtually Silent" mode. The fan will activate if the temperature reaches 55°C inside the power supply. The fan will automatically vary its speed in response to changing temperatures. Once the temperature decreases below 55°C, the fan will turn off.
1.0 INPUT / ENTRÉE / EINGANG / ALIMENTAZIONE IN INGRESSO / ENTRADA 1.1 VOLTAGE (AC Input) / TENSION (c.a.) / SPANNUNG (Wechselspannung) / TENSIONE (CA in ingresso) / TENSIÓN (entrada CA) 1.2 FREQUENCY / FRÉQUENCE / FREQUENZ / FREQUENZA / FRECUENCIA 47Hz ~ 63Hz 1.
2.0 OUTPUT / SORTIE / AUSGANG / USCITA / SALIDA NOTE / REMARQUE / HINWEIS / NOTA 2.1 HOLD-UP TIME: 20ms (minimum) / TEMPS DE MAINTIEN : 20ms (minimum) / VERWEILZEIT: 20ms (Minimum) / TEMPO DI INTERRUZIONE: 20ms (minimo) / TIEMPO DE DEMORA: 20ms (mínimo) 18 VOLTAGE / TENSION / SPANNUNG TENSIONE / TENSIÓN MAX.
2.2 LOAD TRANSIENT RESPONSE (STEP LOAD) / RÉGIME TRANSITOIRE DE CHARGE / LASTÜBERGANGSVERHALTEN (SCHRITTLAST) / RISPOSTA ALLE VARIAZIONI DI CARICO (CARICO A GRADINO) / RESPUESTA A TRANSITORIOS DE CARGA (CARGA REPENTINA) 2.
3.0 PROTECTION / PROTECTION / SCHUTZSCHALTUNG / PROTEZIONE / PROTECCIÓN 3.1 INPUT UNDER VOLTAGE / SOUS-TENSIONS D'ENTRÉE / EINGANG UNTER SPANNUNG / SOTTENSIONE IN INGRESSO / TENSIÓN INSUFICIEN.
3 . 2 OVER CURRENT PROTECTION / PROTECTION CONTRE LES SURINTENSITÉS / SCHUTZ VOR STROMSPITZEN / PROTEZIONE DA SOVRACORRENTI / PROTECCIÓN CONTRA SOBRECORRIENTE 3.3 OVER VOLTAGE PROTECTION / PROTECTION CONTRE LES SURINTENSITÉS / SCHUTZ VOR STROMSPITZEN / PROTEZIONE CONTRO LE / SOTTOTENSIONIPROTECCIÓN CONTRA SOBRECORRIENTE 3 .
22 3 . 6 OVER TEMPERATURE / SURCHAUFFE / ÜBERHITZUNGSSCHUTZ / SOVRATEMPERATURA / PROTECCIÓN CONTRA LA TEMPERATURA EXCESVA 3 . 7 OVER LOAD PROTECTION / SOUS-TENSIONS D'ENTRÉE / ÜBERLASTUNGSSCH.
4.0 TIME SEQUENCE / SÉQUENCE CHRONOLOGIQUE / ZEITLICHE ABFOLGE / SEQUENZA DI TEMPO / SECUENCIA DE TIEMPO 115V/230V(FULL LOAD): 1ms minimum FIGURE 1 23 T1 Power-On Time / Temps de mise sous tension / Einschaltdauer / Tempo di accensione / Tiempo de encendido (500ms.
115V/230V (PLEINE CHARGE) : 1ms minimum FIGURE 1 115V/230V (MAXIMALLAST): 1ms mind ABBILDUNG 1 24.
25 115V/230V (PIENO CARICO): 1ms minimo FIGURA 1 115 V/230V (PLENA CARGA): 1ms mínimo FIGURA 1.
4.1 REMOTE ON/OFF CONTROL / TÉLÉCOMMANDE / FERNSTEUERUNG DER EIN-/AUSSCHALTUNG / TELECOMANDO DI ACCENSIONE / SPEGNIMENTO (ON/OFF) / CONTROL DE ENCENDIDO/APAGADO A DISTANCIA The power supply is turn .
4.2 AUXILIARY +5Vsb / AUX (+5 Vsb) / AUXILIAIRE +5Vsb / AUSILIARIO +5Vsb / AUXILIAR +5Vsb 4.3 AUTO RESTART / REDÉMARRAGE AUTOMATIQUE / AUTOMATISCHER NEUSTART / RIAVVIO AUTOMATICO / REINICIO AUTOMÁTICO 27 This power supply is specifically equipped with an independent stand-by +5V output current, 2.
28 5.0 ENVIRONMENT / ENVIRONNEMENT / UMGEBUNGSBEDINGUNGEN / AMBIENTE / CONDICIONES AMBIENTALES 6.0 CE REQUIREMENTS / INTERFÉRENCES ÉLECTROMAGNÉTIQUES / CE ANFORDERUNGEN / REQUISITI CE / REQUISITOS DE LA CE 7. 0 MTBF at 25°C=80,000 hours / Moyenne des temps de bon fonctionnement à 25° C =80 000 heures / MTBF bei 25°C =80.
29 8.0 DC CONNECTOR AND CASE REQUIREMENTS / CONNECTEURS C.C. ET BOÎTIER EXIGÉ / ANFORDERUNGEN FÜR GLEICHSTROMANSCHLUSS UND GEHÄUSE / REQUISITI DEL CONNETTORE CC E DEL TELAIO / REQUISITOS DEL CONEC.
30 FLOPPY DRIVE CONNECTOR / CONNECTEUR DE LECTEUR DE DISQUETTE / ANSCHLUSS FÜR / CONNETTORE PER UNITÀ FLOPPY / CONECTOR PARA UNIDAD DE HOUSING: JMT JP11635-4 / BOÎTIER: JMT JP11635-4 / GEHÄUSE: JM.
4pin +12V POWER CONNECTOR / CONNECTEUR D’ALIMENTATION +12 V / +12-V-NETZANSCHLUSS / CONNETTORE DI ALIMENTAZIONE +12V / CONECTOR DE CORRIENTE +12 V 8pin +12V POWER CONNECTOR / CONNECTEUR D’ALIMENTA.
SERIAL ATA POWER CONNECTOR / CONNECTEUR D’ALIMENTATION ATA SÉRIE / SATA-NETZANSCHLUSS / CONNETTORE DI ALIMENTAZIONE SERIAL ATA / CONECTOR DE CORRIENTE SERIAL ATA PCI EXPRESS CONNECTOR / CONNECTEUR .
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 1-510-770-1200 Fax: 1-510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Technical Support US & Canada 1-800-22ANTEC CustomerSupport@antec.
An important point after buying a device Antec PHANTOM 500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec PHANTOM 500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec PHANTOM 500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec PHANTOM 500 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec PHANTOM 500 will certainly help you make a decision on the purchase.
If you already are a holder of Antec PHANTOM 500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec PHANTOM 500.
However, one of the most important roles played by the user manual is to help in solving problems with Antec PHANTOM 500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec PHANTOM 500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
