Instruction/ maintenance manual of the product P150 Antec
Go to page of 10
P150 Super Quiet Mini Tower Case User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario.
2 At Antec, w e continually refine and improv e our products to ensure the highest quality . So it's possible that your new case may differ slightly from the descriptions in this man ual. This isn't a problem; it's simply an improv ement.
3 Connectors: Neo HE power supplies are A TX12V v ersion 2.2 for m factor compatible . The Neo HE430 includes a 24-pin main power connector with detac hable 4-pin connector, and a 4-pin +12V power connector . In addition, Neo HE includes six 4-pin peripheral connectors, four 15-pin Serial A TA Connectors , and PCI Express P ow er Connector .
Advanced Ca ble Management Wire Set. 4. One Y -adapter with one standard 4-pin Molex peripheral connector at one end and two female Floppy power connectors at the other end. 5. One set of wires with a 6-pin PCI Express g raphic card connector at one end and a 6-pin PSU connector at the other end.
5 Setting Up 1. Place the case upright on a flat, stable surface. 2. Loosen the thumbscrews from the left side panel. R emov e it by swinging it out. Note: Don't use your fingernail to pr y or lift the panels . 3. Inside the case you should see the pow er supply , some wiring with marked connectors (USB , PWR etc.
Connecting the IEEE 1394 (FireWire®, i.Link®) Port Y ou will find a single 10-pin connector on a cable attached to the front IEEE 1394 connection. This is an Intel standard connector, which is k eyed so that it can't be accidentally reversed as long as it is connected to a proper Intel standard motherboard header .
7 Hard Disk Installation This case offers two hard disk mounting options . W e recommend against using both mounting methods at the same time. T ray Mount There is a hard disk cag e right under the external 5.25" driv e. Y ou can mount four hard driv es using the trays inside it.
8 3. Slide the device into the driv e bay until you hear a clic k. 4. Mount the other devices accordingly . 5. Connect a large 4-pin connector from the power supply to the male 4-pin connector on each of the devices. T o install a f loppy or other external 3.
The W asha ble Air Filter There is a washable air filter attached to the front of the 92 mm fan cage. From time to time it will be necessar y to w ash the installed air filter . Not washing the air filter will result in higher system temperatures and possible stability problems .
Antec, Inc. 47900 Fremont Blv d. Fremont, CA 94538 T el: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V . Sydneystraat 33 3047 BP Rotterdam The Netherlands T el: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 T echnical Suppor t US & Canada 1-800-22ANTEC CustomerSupport@antec.
An important point after buying a device Antec P150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec P150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec P150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec P150 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec P150 will certainly help you make a decision on the purchase.
If you already are a holder of Antec P150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec P150.
However, one of the most important roles played by the user manual is to help in solving problems with Antec P150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec P150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
