Instruction/ maintenance manual of the product NSK3480-UK MicroATX Antec
Go to page of 8
New Solution Series NSK3480 User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ.
1 At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 Set Up 1. Take the case out of the box. Remove the foam packing material and plastic bag. 2. Place the case upright with the power supply fan at the back facing you on a stable flat surface. 3. Remove the two thumbscrews fastening to the top cover of the case.
3 Note : the detachable 4-pin section cannot be used in place of a 4-pin +12V connector. 3. Connect the Reset switch (labeled RESET SW) to the motherboard at the RST connector. Polarity (positive and negative) does not matter for switches. 4. Power Switch (labeled POWER SW) connects to the PWR connector on the motherboard.
4 Pin Assignment for Front Panel IEEE 1394 Connector Connecting the Audio Ports (AC’97 and HDA) There is an Intel standard 10-pin AC’97 connector and an Intel 10-pin HDA (High Definition Audio) connector; you can connect either the AC’97 or the HDA connector to your motherboard depending on the spec of the motherboard.
5 result in being unable to use the 4th PCI slot depending on the length of the card used. Both HDD trays use soft silicone grommets to mount the HDD. 1.
6 Specifications Size: 120 x 120 x 25.4 mm Rated Voltage: DC 12V Operating Voltage: 10.2V ~ 13.8V The Front 92mm Fans This case comes with two optional 92mm fan mounts in the front of the case. The front fan should be installed so that the air is blowing into the case from the front.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec NSK3480-UK MicroATX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec NSK3480-UK MicroATX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec NSK3480-UK MicroATX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec NSK3480-UK MicroATX you will learn all the available features of the product, as well as information on its operation. The information that you get Antec NSK3480-UK MicroATX will certainly help you make a decision on the purchase.
If you already are a holder of Antec NSK3480-UK MicroATX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec NSK3480-UK MicroATX.
However, one of the most important roles played by the user manual is to help in solving problems with Antec NSK3480-UK MicroATX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec NSK3480-UK MicroATX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
