Instruction/ maintenance manual of the product NSK 6580B-EC Antec
Go to page of 9
New Solution Series NSK 6000, 6580 and 6580B User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ.
1 At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 2. Remove the screws from the right side panel. 3. There are two latches on the side panel. Slide the latches towards the front of the case and swing open the panel. 4. Inside the case you should see the power supply, some wiring with marked connectors (USB, PWR etc.
3 Connecting the USB Ports You will find a single 10-pin connector on a cable attached to the front USB ports. This is an Intel standard connector, which is keyed so that it can’t be accidentally, reversed as long as it is connected to a proper Intel standard motherboard header.
4 CONNECTING THE AUDIO PORTS (AC’97 and HDA) There is an Intel standard 10-pin AC’97 connector and an Intel 10-pin HDA (High Definition Audio) connector. You can connect either of them to your motherboard depending on the specification of the motherboard.
5 grommets with the special screws provided. Note : Don’t over-tighten the screws. Doing so will reduce the vibration and noise-dampening ability of the rubber grommets. 5. Slide and lock the tray back into the case. 6. Repeat the same procedure for the other devices as necessary.
6 Note : The minimum voltage to start the fan is 5V. We recommend that our users to set the fan speed to High if you choose to connect the fan to a fan control device or to the Fan-Only connector found on some of Antec’s power supplies. A fan-control device regulates the fan speed by varying the voltage to it.
7 Learn more about 80 PLUS®: 80 PLUS® is an innovative, electric utility-funded incentive program to integrate more energy-efficient power supplies into desktop computers and servers. The 80 PLUS performance specifications require power supplies in computers and servers to be 80% or greater energy efficient.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec NSK 6580B-EC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec NSK 6580B-EC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec NSK 6580B-EC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec NSK 6580B-EC you will learn all the available features of the product, as well as information on its operation. The information that you get Antec NSK 6580B-EC will certainly help you make a decision on the purchase.
If you already are a holder of Antec NSK 6580B-EC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec NSK 6580B-EC.
However, one of the most important roles played by the user manual is to help in solving problems with Antec NSK 6580B-EC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec NSK 6580B-EC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
