Instruction/ maintenance manual of the product CMO-2743 KitchenAid
Go to page of 6
ELECTRIC BUILT-IN MICRO WAVE/SINGLE OVE MODELS: KEMI 377 KEMS 375/376 KECO-375MS/376MCS CMO-2743 INSTALLATION INSTRUCTIONS INSTALLER: FINAL CHECK LIST IMPORTANT: LEAVE THESE INSTRUCTIONS FOR USE BY THE LOCAL ELECTRICAL INSPECTOR PLACEMENT ‘-1 1. Properly positioned - level, aligned and square with cabinet opening.
IMPORTANT Read Before Installing to Save Time, Work, assure proper performance, and owner’s warranty protection. Excessive Microwave Energy Exposure Hazard - Do Not attempt to operate thls microwave oven with the door open. - Do Not tamper with or defeat the safety interlocks.
ELECTRICAL REQUIREMENTS Electrical Shock Hazard - Electrical ground is required on this appliance. - Improper connection of the equipment-grounding conductor line can result in electrical shock. - Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.
MOBILE HOME INSTALLATION When installed in a mobile home, the installation must conform to the Manufactured Home Construction and Safely Standards, Title 24 CFR, Part 3280 (formerly Ihe Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280).
INSTALLING THE UNIT IN CABINET Potential Personal Injury Hazard . Use both hands to remove oven doors. . Grasp only the sides of the oven door. Do Not use any portion of the front frames or trim for lifting. Failbre to properly grasp oven door could result in damage to product or personal injury.
REINSTALL DOOR (See Fig. 2) 1. Slide door on hinge arms until firmly seated. 2. Lower door to full open position. 3. Push finger tabs back. Depress the tabs and slide forward. 4. Close and reopen door slowly to make sure it has been replaced properly.
An important point after buying a device KitchenAid CMO-2743 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KitchenAid CMO-2743 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KitchenAid CMO-2743 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KitchenAid CMO-2743 you will learn all the available features of the product, as well as information on its operation. The information that you get KitchenAid CMO-2743 will certainly help you make a decision on the purchase.
If you already are a holder of KitchenAid CMO-2743, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KitchenAid CMO-2743.
However, one of the most important roles played by the user manual is to help in solving problems with KitchenAid CMO-2743. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KitchenAid CMO-2743 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
