Instruction/ maintenance manual of the product MINUET 300 Antec
Go to page of 9
1 MINUET 300 User’s Manual.
1 T ABLE OF CONTENTS Minuet 300 ...................................................... 2 Setting U p ........................................................ 2 Motherborad I nstallation .................................. 2 P ow er/LED Connections ....
2 The high quality of our products is assured by a continuous process of re fi nement of their techni- cal features . Therefore, it is possible that your product may differ in some respect from the descrip- tions contained in this manual. This is not a problem– it is an improv ement.
3 2. Line up your motherboard with the standoff holes, and determine which ones line up and remember where they are. Not all motherboards will matc h with all of the provided screw holes , and this is not necessar y for proper functionality . (In other words there will likely be extra holes .
4 CONNECTING THE IEEE 1394 (FIREWIRE ® , I.LINK ® ) POR T Y ou will fi nd a single 10-pin connector on a cable attached to the front IEEE 1394 connection. This is an Intel standard connector, which is k eyed so that it can’ t be accidentally rev ersed as long as it is connected to a proper Intel standard motherboard header .
5 2. Lift up and slide the driv e cage from the case. 3. Place the cage upside down on a fl at surface. 4. Note: Y ou must install the external devices fi rst, before installing the internal 3.5” device. 5. Slide the external 5.25” device into the drive cage from the front.
6 Speed Input C urrent Air Flo w Static P r essure Acoustical N oise Input P ower High 2600 RPM 0.2A (Max.) 0.96 m³ / min (34 CFM) 3.04 mm-H2O (0.12 inch-H2O) 30 dB A 2.4W Medium 2000 RPM 0.15A 0.74 m³ / min (26 CFM) 1.79 mm-H2O (0.07 inch-H2O) 24 dB A 1.
7 Minuet 300 - Explor er Description # Description # Description 1 Thumbscrews 8 3.5” Driv e Bay Cov er 2 T op Panel with V ent 9 Front Bezel 3 P ower Supply 10 5.
8 © Copyright 2005Antec, Inc . All rights reser ved. All trademarks are the property of their respective owners . Reproduction in whole or in part without written per mission is prohibited.Printed in China. V ersion 1.0.1 01/01/2006 Antec, Inc . 47900 Fremont Blv d.
An important point after buying a device Antec MINUET 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec MINUET 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec MINUET 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec MINUET 300 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec MINUET 300 will certainly help you make a decision on the purchase.
If you already are a holder of Antec MINUET 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec MINUET 300.
However, one of the most important roles played by the user manual is to help in solving problems with Antec MINUET 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec MINUET 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
