Instruction/ maintenance manual of the product Mini P180 White Antec
Go to page of 8
Mini P180 / Mini P180 White User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ Ё᭛Փ⫼ݞ.
1 At Antec, we continually refine and improve our products to ensure the highest quality. As such your new case may differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 Installing the Motherboard This manual does not cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting. 1. Lay the case down, with the open side facing up. The drive cages and power supply area should be visible.
3 Note: Please check your motherboard manual for your USB header pin layout and make sure it matches the table below. Motherboard Pin Layout Connecting the eSATA Port This case comes with an eSATA port in the front of the case to connect to your external SATA devices.
4 case. Inside the case there are two 3.5” drive cages located in the upper chamber, which can house up to five hard drives. Note: We recommend using the top 5.25” drive bay for your main 5.25” device. 5.25” Device Installation There are three 5.
5 Cooling System The Rear 120mm TriCool™ fan: This case comes with one 120mm TriCool rear fan installed. This fan has a three-speed switch that lets you choose the speed that best suits your needs. The default setting is Low. See the following specifications.
6 may result in the fan not being able to start. The already lowered voltage from the fan controller will be further reduced by the TriCool circuitry below 5V. We recommend setting these fans to Low speed to maximize quiet computing. The Optional Fans There are two optional 120mm fan mounts at the front of the case inside the HDD cages.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec Mini P180 White (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec Mini P180 White yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec Mini P180 White - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec Mini P180 White you will learn all the available features of the product, as well as information on its operation. The information that you get Antec Mini P180 White will certainly help you make a decision on the purchase.
If you already are a holder of Antec Mini P180 White, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec Mini P180 White.
However, one of the most important roles played by the user manual is to help in solving problems with Antec Mini P180 White. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec Mini P180 White along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
