Instruction/ maintenance manual of the product K/Twelve Hundred-EU Antec
Go to page of 11
Twelve Hundred User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ Ё᭛Փ⫼ݞ.
1 At Antec, we continually refine and improve our products to ensure the highest quality. As such, your new case may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 Installing the Motherboard This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult the motherboard manual for specific mounting instructions and troubleshooting. Before proceeding, check the manual for your CPU cooler to find out if there are steps you must do before installing the motherboard.
3 Installing the Power Supply 1. With the case upright, place the power supply on the four silicone pads on the bottom of the case. Note: Power supplies with fans on the bottom of the power supply will need to be mounted so that the fan is facing the top of the case.
4 Connecting the Audio Ports (AC’97 and HDA) There is an Intel® standard 10-pin AC’97 connector and an Intel® 10-pin HDA (High Definition Audio) connector. You can connect either the AC’97 or the HDA connector, but not both at once, to your motherboard depending on the spec of the motherboard.
5 External 5.25” Device Installation Note: The HDD cages each occupy three consecutive drive bays, and will block installation of larger devices such as optical drives, so please plan ahead before installing your drives. 1. Remove both side panels per the instructions in Setting Up.
6 External 3.5” Drive Installation 1. Remove both side panels per the instructions in Setting Up. 2. Remove the drive bay cover from the drive bay you wish to install an external 3.5” drive into. 3. Install your external 3.5” device into the adapter.
7 200mm Fan Specifications: Size: 200 x 30mm three-speed fan Rated Voltage: 12V DC Operating Voltage: 10.8V ~ 13.2 V Speed Input Current Air Flow Static Pressure Acoustical Noise Input Power High 800 RPM 0.3A 3.80 m³ / min (134 CFM) 0.69mm-H 2 O (0.027 inch-H 2 O) 30 dBA 3.
8 The Optional Fans There are two optional 120mm fan mounts—the side fan (on the left side panel) and the middle fan (at the rear end of the HDD cage). We recommend using Antec 120mm TriCool™ fans and setting the speed to Low. These two fans should be installed so that the air is blowing into the case.
9 Side Air Filter – There is a filter located in the side fan bracket. It is located on the inside of the side panel, so you must open the side panel to access it. Remove the filter by sliding it out of the bracket. From time to time it will be necessary to wash the installed air filters.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec K/Twelve Hundred-EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec K/Twelve Hundred-EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec K/Twelve Hundred-EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec K/Twelve Hundred-EU you will learn all the available features of the product, as well as information on its operation. The information that you get Antec K/Twelve Hundred-EU will certainly help you make a decision on the purchase.
If you already are a holder of Antec K/Twelve Hundred-EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec K/Twelve Hundred-EU.
However, one of the most important roles played by the user manual is to help in solving problems with Antec K/Twelve Hundred-EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec K/Twelve Hundred-EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
