Instruction/ maintenance manual of the product II Antec
Go to page of 7
User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario.
2 At Antec, w e continually refine and improv e our products to ensure the highest quality . So it's possible that your new case may differ slightly from the descriptions in this man ual. This isn't a problem; it's simply an improv ement.
3 CONNECTING THE POWER AND LED 1. Connect the 24-pin or 20-pin A TX power connector and +12V 4-pin connector to y our motherboard. Note: an A TX12V v2.0 power supply comes with a 24-pin po wer connector . This is the latest Intel for m factor power supply .
CONNECTING THE AUDIO POR TS There is an Intel standard 10-pin connector (with 7 individual wires with connectors) coming out from the front panel speaker and microphone connection If your motherboard supports Intel's standard onboard audio connector, y ou can plug in the 10-pin connector directly onto the board.
5 6. Mount your other 3.5" devices into the driv e cage. 7. Slide and lock the driv e cage back into the case. 8. Find the proper connector on the power supply (SA T A, floppy , or standard 4-pin) and connect it to the male connector on your device .
V GA Card Cooling There is an 80mm fan mount with vents on the clear side window right abo ve the V GA card. The vents can supply fresh air to the card without a fan (passi ve cooling), or with a fan (activ e cooling) if you are using a high performance VGA card that needs extra cooling .
Antec, Inc. 47900 Fremont Blv d. Fremont, CA 94538 T el: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V . Sydneystraat 33 3047 BP Rotterdam The Netherlands T el: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 T echnical Suppor t US & Canada 1-800-22ANTEC CustomerSupport@antec.
An important point after buying a device Antec II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec II you will learn all the available features of the product, as well as information on its operation. The information that you get Antec II will certainly help you make a decision on the purchase.
If you already are a holder of Antec II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec II.
However, one of the most important roles played by the user manual is to help in solving problems with Antec II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
