Instruction/ maintenance manual of the product CS-52553CB Antec
Go to page of 9
Nine Hundred User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ.
1 At Antec, we continually refine and improve our products to ensure the highest quality. So it’s possible that your new case may differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 3. Remove the thumbscrews from the other side panel and open it by sliding it towards yourself. Place the screws carefully aside. Inside the case is the power supply mount at the lower rear of the case and the 5.25” drive bay area with two HDD cages inside the bays.
3 3. Connect the Power Switch (labeled POWER SW) to the PWR connector on the motherboard. 4. Connect the Hard Drive LED (labeled H.D.D. LED) to the HDD LED connector on the motherboard. Connecting the USB Ports Note : Please check your motherboard manual for your USB header pin layout and make sure it matches the attached table.
4 4. Front Right Speaker Out Pin: Connect the FPOUT-R connector to this pin. 5. Front Left Speaker Out Pin: Connect the FPOUT-L connector to this pin. 6. Rear Right Speaker Out Pin: Connect the RET-R connector to this pin. 7. Rear Left Speaker Out Pin: Connect RET-L connector to this pin.
5 4. Mount the hard drive into the drive cage and fasten it using the screws provided in the tool bag. 5. Repeat the same procedure for the other HDD(s) as necessary. 6. Slide the HDD cage back to the case and fasten the thumbscrews. 7. Connect the appropriate connector(s) from the power supply to the device(s).
6 The Rear Exhaust TriCool™ Fan There is a 120 x 25mm TriCool™ fan preinstalled at the rear of the case. The fan is installed so the air will be blown out of the case. 200mm Fan Specifications: Size: 200 x 30mm TriCool™ Fan Rated Voltage: 12V DC Operating Voltage: 10.
7 The Side Fan — the Side fan is there to enhance VGA cooling. Just drop a fan into the bracket on the side panel so that air is blowing into the case. The Middle Fan — the middle fan is designed to cool the CPU, VGA card or the power supply if you choose to use a fanless power supply depending on which drive bays you install the HDD cage into.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec CS-52553CB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec CS-52553CB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec CS-52553CB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec CS-52553CB you will learn all the available features of the product, as well as information on its operation. The information that you get Antec CS-52553CB will certainly help you make a decision on the purchase.
If you already are a holder of Antec CS-52553CB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec CS-52553CB.
However, one of the most important roles played by the user manual is to help in solving problems with Antec CS-52553CB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec CS-52553CB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center