Instruction/ maintenance manual of the product SX-18D Keyspan
Go to page of 29
USER MA NUAL Model : SX-18D (Version 1.0).
.
Table of Content Introduction 1. FUNCTIONAL DESCRIPT ION 2 1.1 Buttons 2 1.2 LED Indicat ion 2 1.3 LCD Display 1.4 Connector s 2 2. PRODUCT SPECIF ICATIONS 3 2.1 Technical Specif ication 3 2.2 Electr ical Spec ifica tion 3 2.3 Product Specifi cation 3 2.
.
INTRODUCTION STORXtreme is an integrated solution that provides external hard disk drive, card read er and memory card backup fun ctions. As a portable external storage device, STORX treme i s a perf ect choice for active mobile users providing a light and optimal solution for personal information storage and t ransfer.
Chapter 1 : FUNCTIONAL DESCRIPTION This section describe the various parts and fun ctions of the device. You may refer to Chapter 3 : User Int erface Des cription for detail description.
Chapter 2 : PRODUCT SPECIF ICATIONS 2.1 Technical Sp ecification Copy mode Data Transfer Rate CF to HDD : 3 MBps SD to HDD : 2.5MBps (2x) , 3.4MBps (u ltra speed) MMC to HDD : 1 MBps MS to HDD : 0.5 MBps MS Pro to HDD : 3.5 MBp s USB Transfer Rate This is a high spe ed USB dev ice.
2.5 Bundled Accessories USB cable Installatio n CD Quick Installation Guide User Manual 4.
Chapter 3 : USER INTERFACE DESCRIPTION 3.1 Button Description Button Activatio n Operation Mode Description [POWER/ SELECT] Press Hold Sta ndalone P ress and hold t his button for 3 second s to power O N/OFF the device. [POWER/ SELECT] Press Standal one Press to select the operations (e g.
3 . 3 C o n n e c t o r s D e s c ri p t i o n 3.3.1 Mini USB connector Plug in the mini USB cable into this connector and the other end of the cable to the PC or the notebook’s USB port. Use the mini USB cable that bundle with this device. The device is compliance to USB 2.
3.3.4 44-pin Connector Install the 1.8 ” Hard disk drive into this connector as shown in the picture below. Ensure that the hard disk drive is connected in the corr ect direction. 3.3.5 Battery Compartment Select the type of AA battery used : Alkaline or NiMH Rechargeable B att eries.
Chapter 4 : DEVICE OPERATION 4.1 Standalone Mode (Copy ) Step 1 : Power ON the device by pressing [P OWER] button for 3 seconds. The LCD will turn on, the { INSERT CARD} icon will flash prompting you to in sert a Memory Card. Step 2 : Insert the memory card (eg.
If an error occurs during cop y, the [ERROR] icon will appear on the LCD, y ou may then repeat the copy sequence. When a copy error oc curs, the sub-folder created in the [F ILE] directory is empty, yo u may ignore and delete it.
Chatper 5 : WI NDOWS 98SE /ME INSTALL ATION 5.1 Operating System Supported § Windows 98 Second Edition (SE) or Windows Millennium Edition (ME) § The device driver c an be found in the “Win98SE Driver” directory in the Installation CD 5.2 Install Device Driver on Wind ows 98 SE / ME § Connect the device to PC via USB connection.
- Select the directory path “ F:Win98SE drive r ” (where F : is yo ur CD-ROM drive) and clic k Next - Follow through the online instruction … User Manual 11.
§ Upon installation of the device driver, you will notice 3 ic ons appear on the “M y Computer” screen. Refer th e section on “Installing ne w hard disk on Win98SE / M E & co nfigure new h ard disk drive in Win98SE / ME” if user do not see your ha rd disk d rive icon.
5.5 Installing New HDD on Windows 98S E / ME § When a new HDD is installed to this device, Windows 98SE or ME cannot recognize it as local drive becaus e the new HDD does not contain the Master Boot Record and Primar y Partition Record information.
- Check that INSTEP EzII DRIVE0 is present, - Click on the Start, Program, Accessories and select MS-DOS prompt item, User Manual 14.
- Typ e FDISK in the MS-DOS prompt dialog box, - If you cannot g et to this screen, reboot the sy stem and try again. Type < Y > to enable large disk support.
- 1~3 will depend on the number of HDD pr esent in the computer. Since 20GB HDD is used in this example, enter the choice < 2 > to chan ge the current fixed disk drive.
- Enter < Y > to create Primary D OS partition on current fixed disk drive 2, - Enter < Y > to use maximum available size for a Primary D OS partition, - Press [ ESC ] after Primar y DOS p.
- Press [ ESC ] to exit fdisk, you must then Reboot the computer. 5.7 Format New HDD in Wind ows 98SE / ME - You must reboot the computer after pe rform fdisk.
- Choose the Full for “Format typ e” , - You will notice the new HDD is formatting , - Reboot the computer ag ain to let the OS initialize th e new formatted HDD.
Chapter 6 : WI NDOWS 200x / XP INSTALLATION 6.1 Operating System Supported § Windows 2K & Windows XP § Supported by Microsoft default driver. (Requires service pack from Microsoft Windows Update website) 6.2 Verify window s has properly installed the device driver § Connect the device to PC via USB connection.
6.4 Create Master Boot Record on the new hard disk. - Log in the PC as Administrator , - Click on the My Computer icon by right-click on the mouse and choose the Manag er item, - Or click on the Control Panel icon and follow by Administrative tools .
- Click Next in the write signature prompt and Upg rade Disk wizard prompt, - Tick on Disk 1 option and follow through the instruc tion, - The new HDD will cr eate a Master Boot Record on the new hard disk, - Proceed to crea te a new primary partition.
6.5 Create Primary Partition Record on t he new hard disk. - After the HDD h as created Master Boot Record (w rit e signature), you nee to create a primary partition on your new hard di sk. - Click on the Disk 1 Unallocated bar by right-click of the mouse.
- Choose the Primary partition option and let system assign the drive letter , User Manual 24.
- Choose the FAT32 format, Default allocation unit size and follow through the on-scre en instruction. - Note : Do not choose NTFS because the dev ice Standalone Copy Mode support only FAT or FAT32 format. - The new HDD is fo rmatted and ready to be used.
An important point after buying a device Keyspan SX-18D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Keyspan SX-18D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Keyspan SX-18D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Keyspan SX-18D you will learn all the available features of the product, as well as information on its operation. The information that you get Keyspan SX-18D will certainly help you make a decision on the purchase.
If you already are a holder of Keyspan SX-18D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Keyspan SX-18D.
However, one of the most important roles played by the user manual is to help in solving problems with Keyspan SX-18D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Keyspan SX-18D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
