Instruction/ maintenance manual of the product 902 Antec
Go to page of 13
Nine Hundred Two User’s Manual.
Table of Contents Introduction 1.1 Case Specifications ………………...……………......………….....… 2 1.2 Diagram……………………………………………....…......…….....… 2 Hardware Installation Guide 2.1 Setting Up……….
1 At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 1.1 Case Specifications Case TypeColor Gaming Case Color Black Dimensions 19.3” (H) x 8.7” (W) x 18.5” (D) 490mm (H) x 220mm (W) x 470mm (D) Weight 25.
3 Hardware Installation Guide 2.1 Setting Up 1. Place the case upright on a flat, stable surface so that the rear panel (power supply and expansion slots) is facing you. 2. Remove the panel thumbscrews from the side panel and open it by sliding it towards you.
4 2.4 Flexi-Drive Bay System The Nine Hundred Two comes with nine 5.25” external drive bays at the front of the case. There are two HDD cages pre-installed inside the bottom six 5.25” bays. Each HDD cage occupies three consecutive 5.25” drive bays and can house three hard disk drives.
5 6. Connect the appropriate connector(s) from the power supply to the device(s). Leave some slack in the connections so that you can easily access the fan filters for cleaning. 7. There is a 120mm fan pre-installed onto each cage. Connect the 4-pin connector to the power supply.
6 2.8 Cable Management Compartment There is a cable management compartment between the motherboard and right side panel. You can tuck or route excess cables in this compartment.
7 3.2 eSATA You will find a SATA connector on a cable attached to the front ports. This internal SATA connector is designed to connect to a standard SATA connector on your motherboard. This will allow high-speed external hard disk enclosures such as the Antec MX-1 to run at the same speeds as internally installed hard disks.
8 3.5 Rewiring Motherboard Header Connection There may come a time when you need to reconfigure the pin-out of a motherboard header connector. Examples could be for your USB header, audio input header, or some other front panel connector such as the Power Button connector.
9 4.2 Front/Rear TriCool™ Blue LED Fans The Nine Hundred Two comes with two pre-installed 120mm x 25mm blue LED fans, one in front of each HDD cage to cool the hard drives. These fans are installed so the air will be blown into the case. Each fan comes with a speed control knob at the front of the faceplate.
10 4.3 Optional Fans There are two optional 120mm fan mounts—the side fan (on the left side panel) and the middle fan (at the rear end of the HDD cage). We recommend using Antec 120mm TriCool™ fans and setting the speed to Low. These two fans should be installed so that the air is blowing into the case.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec 902 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec 902 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec 902 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec 902 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec 902 will certainly help you make a decision on the purchase.
If you already are a holder of Antec 902, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec 902.
However, one of the most important roles played by the user manual is to help in solving problems with Antec 902. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec 902 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
