Instruction/ maintenance manual of the product 430 Antec
Go to page of 9
Fusion 430 /Fusion Black 430 User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ TM Media Components.
1 At Antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 The Triple Chamber structure Upon opening the top panel, you will find that the case is divided into three chambers – the power supply chamber, the motherboard chamber and the HDD chamber.
3 reversing the connection. For more info on connecting LEDs to your motherboard, see your motherboard manual. 5. The Hard Drive LED (labeled HDD LED) connects to the hard drive activity header.
4 FireWire port to an IEEE 1394 add-on card that comes with an external-type IEEE 1394 connector, you will need a FireWire Internal Adapter. To order one, please visit Antec’s web store at http://www.antec.com/StoreFront.bok and search for part number 30031.
5 1. Make sure the power supply is off and unplugged before installing any hardware. 2. Connect the 3-pin power cable from the display to the 3-pin connector on the 24-pin ATX main power connector of the power supply.
6 3. Find a 4-pin molex or SATA connector on the power supply and connect it to the power connector on the device. Cooling System The 120mm TriCool™ fans The Fusion 430 co mes with two 120mm TriCool™ fans preinstalled at the side of the case inside the motherboard chamber.
7 When used with the CPU Air Guide, fresh air from the rear air intake can be directed to the CPU cooler to enhance the CPU cooling. The CPU Air Guide can be adjusted by adding or removing stacking sections to best suit different motherboard CPU positions.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec 430 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec 430 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec 430 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec 430 you will learn all the available features of the product, as well as information on its operation. The information that you get Antec 430 will certainly help you make a decision on the purchase.
If you already are a holder of Antec 430, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec 430.
However, one of the most important roles played by the user manual is to help in solving problems with Antec 430. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec 430 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
