Instruction/ maintenance manual of the product 4400HR Keys Fitness
Go to page of 22
Keys Fitness Treadmills Manufactured in the USA by: KEYS Fitness Products, LP P.O. Box 551239 Dallas, Texas 75239 O WNER’S MANU AL MILEST ONE 4200/4400HR TREADMILL PART# 15-0113.
T able of Contents Table of Contents 2 Specification Sheet 3 Important Safety Information 4 Before You Start 5 Warm Up Exercises 6 Assembly, Moving Instructions 7 Power Requirements 8 Console Function.
MS4200 MS440 0HR ♦ Horsepower (Continuous) 2 .0hp 2.5 hp ♦ Display Type (Green, with pace) 5 Win dow L E D 5 Wi ndow LED ♦ Elec troni cs Push butto n Push Butt on ♦ Pre- Set Pr ogr ams 4 4 ♦.
Important Safety Information 1) WARNING! Before using t his tre admil l or sta rting a ny exerc ise pr ogram, consul t your phys ician. Th is is especiall y important for person s over the ag e of 35 and/or persons with pre -existing healt h problems.
Thank you for purchasing a KEYS treadmill! Th e MS4200 and MS4400HR were designed to meet your needs for cardiovascular exercise. Before you start, please read the Owner’s Manual a nd become familiar with the operation of your new treadmill. ♦ Remember to take the time to perform the stret ching exercises provided on Page 6 to avoid injury.
W arm Up Exer cises EXERCISE GUIDELINES WARNING ! Before beginning this or any exercise program , you should consult your physician. This is espe- cially important for individuals over the age of 35 or individuals with pre-existing health problems.
The MS4200 and MS4400HR are shipped in two pieces, please see assem bly instructions below. After opening the box, remove any packing materials from the treadmill. Do not throw away any packing materials until the unit is working properly. Place th e base on a clean, level surface.
NG! IMPROPER CONNECTION OF THE EQUI PMEN T GROUNDING CONNECTO R CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED.
Console Functions and Descriptions POWER - Press to on. Allow 6-8 seconds while the electronics perform a self check prior to pressing other buttons. START/STOP - This butto n starts the treadmill belt moving. There is a 4 second countdown built in as a safety feature to let you know the treadmill belt is about to start moving.
Console Functions and Descriptions POWER - Press to on. Allow 6-8 seconds while the electronics perform a self check prior to pressing other buttons. START/STOP - This butto n starts the treadmill belt moving. There is a 4 second countdown built in as a safety feature to let you know the treadmill belt is about to start moving.
There are five display windows on the control panel to provide feedback information . TIME WINDOW ♦ TIME: Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds) ♦ INTERVAL TIME: Indicates countdown in seconds to the ne xt interval starting at 5 seconds and counting to 0 seconds.
QUICK START / MANUAL MODE ♦ Plug into a standard wall outlet (110-Volt AC, 15-amp circuit). ♦ Insert the Safety Key into the treadm ill console. ♦ Stand on the treadmill and straddle belt. ♦ Press POWER button. There will be an eight (8) second delay after pressing the POWE R button before data can be entered.
PROGRAM MODE ♦ Plug into a standard wall outlet (110- Volt AC, 15-amp circuit). Inser t the Safety Key into the tr eadmill console. ♦ Stand on the treadmill and straddle belt. ♦ Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data can be entered.
Pr ogram and Operating Instructions Heart Rate Control Instructions (MS4400HR) HEAR T RA TE PROGRAM MODE The Heart Rate program is designed to keep your h eart rate a desired level of “beats per minute” by automatically adjusting the incline.
12 11 10 9 8 7 6 5 4 3 2 1 Pr ogram Profiles 1 2 3 4 5 6 7 8 9 10 SPEED INCLINE The Fat Burn Program is designed to vary the treadmill elevation, while maintaining a constant walking belt speed.
WARNING! Do not overtighten roller s ! This will ca use premature roller bearing failure! Belt adju stment a nd tens ion perfo rms two functio ns: adjustment for tension and cent ering. Your n ew trea dmill co mes pre-a djust ed from the factory f or tension and centerin g.
WARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector. CLEANING Routine cleaning of your Keys Fitne ss treadmill will extend the life of your treadmill.
Your treadmill will o per at e in British Units (miles per hou r) or Int ernationa l Units (kilomete rs per hour). A ll treadmills are calibr ated at the fact ory for British Units (m iles pe r hour). To chan ge the display to read in kilometers, follow the steps described here: 1) Turn power OFF on the con sole.
Treadmill will not start. 1) Is the Safety Key inserted into the Treadmill C onsole? 2) Make s ure the po wer cor d is plugged into a surge p rot ector , the s urge pr otec tor i s plugged in to a prop erly g round ed outlet , and the sur ge prot ector is turn ed on .
Page 20 Parts & Diagrams MS4200 MS4400HR MS4200 MS4400H R 1 Left Side Extrusion Rail 05-0033 05-0033 12 Poly V Belt 04-0004 04-0004 2 Right Side Extrusion Rail 05-0033 05-0033 13 Motor Hood Cover .
MS4200/4400HR- Parts List Page 21 PA RT # DESCRIPTION QTY PA RT # DESCRIPTION QTY 02-0004 SCREW-8x5/ 8 PHIL PH AB BLACK 9 08- 0004 BREAKER-CIRCIT-15AMP 1 02-0005 SCREW- 8x5/8 PPH HILO BLACK TPB 11 08-.
KEYS FITNESS TREADMILL WARRANTY FIRST APT. NO. ADDRESS M.I. LAST Z S CITY TELEPHONE KEYS FITNESS respects the r ights of your privac y. Our company will not sell or distribute to others the information above. This information is u sed to track our product quality and to contact you in the event of a product safety concern.
An important point after buying a device Keys Fitness 4400HR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Keys Fitness 4400HR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Keys Fitness 4400HR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Keys Fitness 4400HR you will learn all the available features of the product, as well as information on its operation. The information that you get Keys Fitness 4400HR will certainly help you make a decision on the purchase.
If you already are a holder of Keys Fitness 4400HR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Keys Fitness 4400HR.
However, one of the most important roles played by the user manual is to help in solving problems with Keys Fitness 4400HR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Keys Fitness 4400HR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
