Instruction/ maintenance manual of the product TS-2000 Kenwood
Go to page of 10
TS-2000/2000X TS-B2000 All-Mode Multibander.
All-mode multibander: HF/50/144/440/1200MHz* in one compact rig offering wide-band receive (500kHz to 1300MHz, non-contiguous) and 100W output (HF/50/144MHz) — ideal for both base station use and mobile operation. *TS-2000 & TS-B2000 require optional UT -20 1200MHz all-mode unit.
Kenwood’ s new all-mode multibander breaks new ground in more ways than one. This TS-B2000 black box version offers the same functionality and performance as the TS-2000 — minus the controls — so you can carry it in the trunk of your car , or set up on the desk with your personal computer .
Sleek front panel with power switch and mic/headphone terminals Optional RC-2000 mobile controller available for mobile use ARCP-2000 radio control software supplied for PC use * With optional UT -20 .
A marvel of electronic engineering: Kenwood’ s stylish new all-mode multibander is packed with top-end features yet compact enough to use at home, in your car , or on a DX’pedition. W ith its 3D front panel, featuring backlit keys and large amber display , its appear- ance is as distinctive as its performance.
A ll-Mode, Multiband, Engineered for Excellence Kenwood’ s new TS-2000/2000X/B2000 all-mode multibander may be compact, but it’ s equipped with all the features you would expect to find in a top-of-the-line rig. IF Digital Signal Processing The TS-2000/2000X/B2000 is serious about digital signal processing.
AF Digital Signal Processing DSP is also executed at the AF stage, offering Beat Cancel and CW Auto T une functions. It also enables you to achieve remarkable noise reduction and apply custom enhancements to your transmitted voice.
High-duty T ransmitter Section This transceiver is the perfect choice for contesting, mobiling and FSK applications, deliver- ing up to 100 (AM: 25) watts on HF/50/144MHz bands. Output is 50 (AM: 12.5) watts on the 440MHz band, and 10 (AM: 2.5) watts on 1200MHz*.
Y ou control the TS-2000/2000X/B2000 from the portable Commander (CMD). V oice is transmitted from the CMD unit on the 440MHz band. Control signals are also sent from the CMD unit on the 440MHz band. The HF signal received by the TS-2000/2000X/B2000 is relayed to the CMD unit on the 144MHz band.
RC-2000 Mobile Controller ARCP-2000 Radio Control Program (Supplied with TS-B2000) UT -20* 1200MHz All-Mode Unit DRU-3A Digital Recording Unit HS-5 Deluxe Headphones (8 Ω ) HS-6 Small Headphones (12.
An important point after buying a device Kenwood TS-2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood TS-2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood TS-2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood TS-2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood TS-2000 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood TS-2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood TS-2000.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood TS-2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood TS-2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
