Instruction/ maintenance manual of the product SW-508 Kenwood
Go to page of 8
B61-1229-00 00 MA (Y) KW 0312 PO WERED SUBWOOFER INSTR UCTION MANU AL SW -508 KENW OOD CORPORA TION ENGLISH SW -508 1229/01/EN.
ENGLISH 2 EN SW -508 1229/02-08/EN Before applying power Caution: Read this page car efully t o ensure saf e oper ation. Units are designed f or operation as f ollows. Europe and U.K. ................................................ A C 230V only Au stralia .
ENGLISH 3 EN SW -508 1229/02-08/EN Caution: Read this page car efully to ensur e saf e operation. IMPORT ANT SAFEGUARDS 10. Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
ENGLISH 4 EN SW -508 1229/02-08/EN Attaching the cushions At tac h four cushions to the base of the subw oofer , one at eac h corner . The cushions prevent the subw oofer from sliding, and dampen its vibrations. Accessories Pin-plug cord .............
ENGLISH 5 EN SW -508 1229/02-08/EN Connections Before connecting LINE INPUT AU TO SHUT OFF SPEAKER INPUT SPEAKER OUTPUT ON OFF L R L R 4 1 3 2 1 SPEAKER INPUT ter minals Connect to the speaker output terminals on y our amplifier or receiver . 2 SPEAKER OUTPUT ter minals T hese terminals output the signal received at the SPEAKER INPU T terminals.
ENGLISH 6 EN SW -508 1229/02-08/EN SUB W OOFER PRE OU T Amplifier or Receiver Connecting to Amp’ s Subwoofer Preout jack LINE INPUT AUTO SHUT OFF SPEAKER INPUT SPEAKER OUTPUT ON OFF L R L R SUB WOOFER LINE INPUT Connecting to Amp’ s Speaker output terminals Note: Do not use LINE INPU T jac k and SPEAKER INPUT terminals at the same time.
ENGLISH 7 EN SW -508 1229/02-08/EN Example of standard adjustment accor ding to the type of fr ont speakers. Depending on the listening room condition and the front speaker c haracteristics, other adjustment set ting than the ex - amples shown abo ve ma y provide more nat ual bass sound and more ef f ective bass reproduction.
ENGLISH 8 EN SW -508 1229/02-08/EN Specifications T ype ...................... Subwoof er system with built-in amplifier [Amplifier] Dynamic P ow er ...................................... 75 W + 75 W (6 Ω ) Rated Output P ower .......... 60 W + 60 W RMS (1 00 Hz,6 Ω ) Input Sensitivity / Impedance LINE INPUT .
An important point after buying a device Kenwood SW-508 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood SW-508 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood SW-508 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood SW-508 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood SW-508 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood SW-508, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood SW-508.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood SW-508. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood SW-508 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
