Instruction/ maintenance manual of the product KVT-M707 Kenwood
Go to page of 64
7-Inch WIDE SCREEN MONIT OR-RECEIVER KVT -M707 INSTR UCTION MANU AL © B64-3134-00/00 (EV) KVT-M707_Instruct_E_r6.indd 1 KVT-M707_Instruct_E_r6.indd 1 05.
2 | English C ontents Before Use .................................................... 4 Opening/Closing the Monitor and P ower Switch ....................................................... 6 Removing/A ttaching the Protection Panel 7 KVT -M707 Basic operations .
English | 3 Setup Menu Setup Menu ............................................................37 Displaying the Control scr een Displaying the Setup Menu screen Audio Set Up ..........................................................38 Displaying the Audio Set Up screen Crossover Network Setup System Setup .
4 | English 2 W ARNING T o prev ent injury or fire, take the f ollowing precautions: • T o prevent a short circuit, never put or leav e any metallic objects (such as coins or metal tools) inside the unit.
English | 5 Loading and Replacing the battery 1. Use two "R03"/ " AAA "-size batteries. Slide the cover while pressing downwar ds to remove it as illustrated . 2. Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case.
6 | English Opening/Closing the Monitor and P ower S witch • Do not touch the moving components when you are opening or closing the monitor . If you touch the moving components, you may be hurt or the equipment may be damaged. • Do not tr y to open or close the monitor by hand.
English | 7 Removing/A ttaching the Protec tion P anel • Close the monitor first, then remove or attach the prot ection panel. • After you have removed the protection panel, you cannot operat e the receiver . • After you have removed the pr otection panel, you can flash the burglar alarm lamp (see page 46).
8 | English KVT -M707 Basic operations ■ When the monitor is open ■ When the monitor is closed TI TI KVT-M707_Instruct_E_r6.indd 8 KVT-M707_Instruct_E_r6.
English | 9 1 Play/Pause [ 38 ] key Pauses and r eplays a disc. 2 Video Source Selection [V .SEL] key Video source selection changes in the following or der each time you press the key . Rear view camera* Navigation* Video/ TV* *Optional accessory Y ou can also tur n off the video display by pressing the key longer than 1 second.
10 | English Basic Opera tions of Remote Con troller 1 Remote Control Mode selector Selects one of the following remote control modes . T V: T V source AUD: T uner source or attached disc changer/disc player source 2 [NA V ] switch Pressing the swit ch until it locks enters into the navigation system control mode.
English | 11 5 [V .SEL] key Video source selection changes in the following or der each time you press the key . Rear view camera* Navigation* Video/ TV* *Optional accessory 6 [BAND] key TUNER +: Switches to the FM1, F M2, or FM3 band. –: Switches to the AM band.
12 | English Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed . • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode aut omatically. The screen mode of these displays cannot be changed.
English | 13 Muting Audio V olume upon Reception of Phone call The system automatically attenuat es the audio volume when receiving a phone call . When the telephone is called... The Phone Call ("CALL ") screen appears, and the system automatically attenuates the audio volume.
14 | English T uner C ontrol V arious control screens appear in the Tuner Source mode . Displaying the Easy C ontrol P anel The T uner Control P anel is displayed in a floating position of the selected picture. Displaying the Easy Control P anel 1 A djusts the volume.
English | 15 a When 1 to 6 buttons appear , you can recall the stations on memory. F or memor y of broadcasting stations, see <A uto Memor y> (see page 16) or <Manual Memor y> (see page 17). s Indicates current Seek mode. d Selects option from various function menus.
16 | English Seek Mode Sets a station selection. SEEK If SEEK is not shown, touch Next Ne xt . The mode is switched in f ollowing order each time you touch the button. Tunes in a station with good reception automatically . AUTO2 AUTO1 MANU Tunes in stations in memory one after another .
English | 17 T uner Control Manual Memory Stores the current r eceiving station in memory. 1 Select a station you wish to store in memory AM 2 Store in memory 1 — 6 If 1 to 6 are not shown, touch Next Ne xt . Continue to touch until the memory number appears.
18 | English Direct Search T unes in a station when its frequency is entered. 1 Select a band BAND + – 2 Select the Direct S earch mode DIRECT # BS 3 Enter frequency 0 — 9 WXYZ When you enter them, signal r eception star ts. Example: When you receive F M 92.
English | 19 T uner Control Search for Pr ogram T ype A program is tuned when you set its pr ogram type. 1 Call the Tuner Menu Me n u 2 Call the PTY Search Menu PTY Search TUNER All Speech All Music News Current Affairs Information SRCH FM 98.1 Not Found 1 3 2 2 4 1 Selects a program type.
20 | English Disc Changer/CD play er C ontrol Y ou can recall various control scr eens during Disc Changer/CD player playback. (with the optional accessor y Disc Changer or CD player connected only) Displaying the Easy C ontrol P anel The Disc Changer/CD player Control P anel is displayed in a floating position of the selected picture.
English | 21 y Selects the Disc Name (see page 22 for the <Set Disc Name>), Disc T ext, or T rack T ext mode for text display . u Scr olls the display text. i Swit ches the play time display between Track, Disc, and Disc Remaining Time. o Shows Disc Number .
22 | English Set Disc Name Names a CD . 1 Play a CD you wish to name 2 Call the CD/Disc Changer Menu Me n u 3 Select the Set Name mode Name Set • The Name Set position varies depending on the disc you are playing . 4 Enter a name F or character entr y details, see <Character Entry> (see page 34).
English | 23 Direct Search Searches for a disc or a track when its number is entered. 1 Enter a disc or track number 0 — 9 WXYZ 2 Search When searching for a track: ¢ 4 When searching for a disc: BAND + – • The operation ends automatically if you do not operate within 10 seconds.
24 | English TV C on tr ol V arious control screens appear in the T V Source mode. ( Y ou can only operate T V with the optional accessor y T V T uner connected.) Displaying the T V Picture screen Various contr ol screens appear in the T V Source mode.
English | 25 Displaying the T V Contr ol screen Y ou can tune in a TV station using var ious functions. T V Control scr een t A djusts the volume. y Calls the T V Menu. u Calls the Sound Eff ects Menu. (see page 54) i Displa ys the Source Select screen.
26 | English Seek Mode Sets a station selection. SEEK If SEEK is not shown, touch Next Ne xt . The mode is switched each time you touch the button. Tunes in a station with good reception automatically . AUTO2 AUTO1 MANU Tunes in stations in memory one after another .
English | 27 TV C on tr ol Preset Select Lists and tunes in stations in memory one af ter the other . 1 Select a band you wish to call TV 2 Call the T V Menu Me n u (Page 25 y ) 3 Call the Preset Select Menu Preset Select TV TV1 1) 1ch TV1 2) 2ch TV1 3) 3ch TV1 4) 4ch TV1 5) 5ch TV1 6) 6ch TV 3ch 2 1 1 T unes in the displayed station.
28 | English DAB T uner control V arious control screens appear in the DAB T uner source mode. (with the optional accessory DAB tuner connected only) Displaying the Easy C ontrol P anel The DAB Tuner Contr ol Panel is displayed in a floating position of the selected picture.
English | 29 Displaying the D AB T uner Menu screen Y ou can selec t menu options using various functions. Me n u DAB Tuner Menu screen s Selects options from various function menus. d Returns to the D AB Tuner C ontrol screen. • For DAB Tuner function details, see the Instruction Manual of DAB T uner (optional accessor y).
30 | English Seek Mode Sets a station selection. SEEK If SEEK is not shown, touch Next Ne xt . The mode is switched each time you touch the button. Tunes in a station with good reception automatically . AUTO2 AUTO1 MANU Tunes in stations in memory one after another .
English | 31 DAB T uner contr ol Service Selec t The service list of the currently receiving ensemble is displayed for y our selection. 1 Call the DAB T uner Menu Me n u 2 Call the Service Select Menu Service Select DAB Service Name Service Name Service Name Service Name Service Name Service Name 220.
32 | English Search for Pr ogram T ype The services are received when y ou set its program type. 1 Call the DAB T uner Menu Me n u 2 Call the PTY Search Menu PTY Search DAB PTY News SRCH LANG 220.094 4 2 1 1 3 1 Selects a program type. 2 Searches for the pr ogram type.
English | 33 DAB Inf ormation The DAB inf ormation is displayed. 1 Call the DAB T uner Menu Me n u 2 Display the DAB Inf ormation screen DAB Inf ormation DAB Service Label: Ensemble Label: Component Lable: 220.
34 | English Character Entry How T o Use the Char ac ter Entry screen When you select the Set Disc Name mode or others, the following scr een appears for character entry. Character Entr y screen 1 A djusts the volume. 2 Shifts the cursor . 3 Ent ers a space.
English | 35 Source Select The source y ou wish to listen to can be selected quickly. Displaying the C ontrol screen Pr ess this key several times unit the Control screen appears. Control screen • The Source Select screen can be displayed from the contr ol screen of any source .
36 | English Adjusting the Monitor Displa y P osition and Quality Y ou can adjust the position and picture quality of the monitor . Displaying the Screen C ontrol screen Y ou can adjust the pic ture quality using the following keys. Screen Control scr een 1 Brightness Control Disabled if the Auto Dimmer is On.
English | 37 Setup Menu Setup Menu Y ou can set up various receiver parameters . Displaying the C ontrol screen Pr ess this key several times until the Control screen appears. Control screen • Y ou can call the same Setup Menu for the Control screen of each source.
38 | English Audio Set Up Y ou can setup a speaker network, etc. Displaying the A udio Set Up screen Speaker setup screen 1 A djusts the volume. 2 Returns to the C ontrol screen of the previous source. 3 Calls the Sound Eff ects Menu. (see page 54) 4 Calls the Setup Menu.
English | 39 Setup Menu Crossov er Network Setup Y ou can set a crossover fr equency of speakers. (Page 38 5 ) X'Over setup screen X'Over Re t u r n HPF Front FREQ HPF Rear FREQ LPF SUB FREQ 220Hz 180Hz 120Hz Normal SUB Phase 1 2 3 4 5 1 Sets a F ront High Pass F ilter frequency.
40 | English Sy stem Setup Y ou can set up the system parameters. Displaying the S ystem Set Up 1 screen System Set Up 1 screen 1 A djusts the volume. 2 Returns to the C ontrol screen of the previous source. 3 Calls the Sound Eff ects Menu. (see page 54) 4 Calls the Setup Menu.
English | 41 Displaying the S ystem Set Up 2 screen System Set Up 2 screen 9 Selects an illumination color of receiv er keys. ( Red ) "Green": Gr een "Red": Red p Displa ys the System Set Up 1 screen. Setup Menu System Set Up 2 Green Key ILLUMI 9 10 KVT-M707_Instruct_E_r6.
42 | English C ontrol during DVD V ideo or V ideo CD Playback A V Inter face Y ou can set audio and visual (A V ) inter face parameters. Displaying the A V I/F 1 screen A V I/F 1 screen 1 A djusts the volume. 2 Calls the Sound Eff ects Menu. (see page 54) 3 Calls the Setup Menu.
Be fore Use English | 43 Setup Menu Displaying the A V I/F 2 screen A V I/F 2 screen 9 Sets a method t o switch to the rear view camera video display . ( Off ) "On": Switches to the the r ear view camera video display when engaging the shift knob of car to "Reverse" .
44 | English C ontrol during DVD V ideo or V ideo CD Playback User Interface Y ou can set up user interface (IF) parameters. Displaying the U ser I/F 1 screen User I/F 1 screen 1 A djusts the volume. 2 Returns to the C ontrol screen of the previous source.
English | 45 Be fore Use Setup Menu T ouch Panel Adjustment Y ou can adjust the touch panel operations. 1 Display the T ouch Panel Adjust screen T ouch If T ouch is not shown, touch or to display it. Me n u T ouch Adjust T ouch Set 1 3 2 4 1 1 1 5 1 Adjusts the volume .
Be fore Use 46 | English Security Code Setup Y ou can set a security code to protect your receiv er system against theft. • When the Securit y Code function is activated it can't be released. Note, your Security Code is the 4 digit number enter ed in your "Car Audio P assport" in this pack age.
English | 47 Be fore Use If you have pr essed the Reset button or if you hav e disconnected the Receiver from ba ttery... 1 Enter the correct security code 0 — 9 Y ou must enter the same security code as that you have entered in St ep 3 above. 2 Enter the security code Enter Now , you can use your Receiver .
Be fore Use 48 | English Set Up Memor y Audio Set Up and A V Inter face settings can be memorized. The memorized settings can be recalled at any time. F or example, even when the settings are cleared due to r eplacement of the battery, the settings can be restored .
Be fore Use English | 49 Setup Menu T V Setup The T V signal receiving areas can be set. (with the optional accessory T V T uner connected only) Displaying the T V1 Area Set screen TV Set Up T V1 Area Set screen 1 A djusts the volume. 2 Returns to the C ontrol screen of the previous source.
50 | English C ontrol during DVD V ideo or V ideo CD Playback DAB Set Up Y ou can set the DAB reception. (with the optional ac cessor y DAB T uner connected only) Displaying the D AB Set Up screen DAB S e t Up DAB Set Up screen 1 A djusts the volume. 2 Calls the Sound Eff ects Menu.
English | 51 Announcement Selection Y ou can set various announcement reception parameters. 1 Displays the Announcemen t Selec tion screen Set (page 50 9 ) Announcement Re t u r n T raffic News Off T ranspor t News Off War ni ng Off News Off 1 3 4 1 1 1 3 2 1 Adjusts the volume .
52 | English RDS Setup The related RDS parameters can be set. Displaying the RDS Set Up 1 screen RDS Set Up RDS Set Up 1 screen 1 A djusts the volume. 2 Returns to the C ontrol screen of the previous source. 3 Calls the Sound Eff ects Menu. (see page 54) 4 Calls the Setup Menu.
English | 53 AMP Con trol Sets the power amp connected via the LX bus. (with the optional acc essor y LX P ower Amp connected only) Displaying the AMP C ontrol screen AMP Control AMP Control screen 1 A djusts the volume. 2 Calls the Setup Menu. 3 Calls the Sound Eff ects Menu.
Be fore Use 54 | English Sound Effects Menu Sound Effects Menu Y ou can set up the receiver sound eff ects. Displaying the C ontrol screen Control screen • You can displa y the same Sound Effects Menu on the Control screen of an y source. TUNER 13:50 FM 1 Preset 1 98.
Be fore Use English | 55 Audio C ontrol Y ou can adjust the front/ rear and right/ left audio balance. Displaying the A udio Control 1 screen Audio Contr ol 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu.
56 | English C ontrol during DVD V ideo or V ideo CD Playback Equalizer Y ou can set up the equalizer . Displaying the Equalizer scr een Equalizer screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu.
English | 57 Be fore Use Sound Effects Menu T one cur ve setup Y ou can set a T one cur ve. 1 Display the T one setup screen T one T one setup screen Ba s s DC E XT 1 2 3 5 4 6 1 1 1 7 1 Adjusts the volume. 2 Bass adjustment items are displayed . 3 Middle adjustment items are displayed.
58 | English Sound Effects Menu Zone C ontrol Y ou can set the front and rear audio sourc e. Displaying the Zone C ontrol screen Zone Contr ol screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu.
English | 59 KVT-M707_Instruct_E_r6.indd 59 KVT-M707_Instruct_E_r6.indd 59 05.5.9 2:27:25 PM 05.5.9 2:27:25 PM.
60 | English T roubleshooting Guide General ? The power does not turn on. ✔ The fuse has blown. After checking for short circuits in the wires, replace the fuse with one having the same rating. ✔ The speaker wire has a shor t-circuit or touches the chassis of the vehicle, and then the protection function is activated.
English | 61 ? No sound can be heard, or the volume is low . ✔ Attenuator is turned on. T urn off Attenuator . ✔ The fader or balance settings are set all the way to one side. Reset the fader and/or balance settings . ✔ The input/output wires or wiring harness are connected incorrectly.
62 | English Specifications Monitor section Picture size : 6.95 inches wide 154.1( W )×87.1(H)mm Display system : T ransparent TN L CD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.
English | 63 KVT-M707_Instruct_E_r6.indd 63 KVT-M707_Instruct_E_r6.indd 63 05.5.9 2:27:28 PM 05.5.9 2:27:28 PM.
KVT-M707_Instruct_E_r6.indd 64 KVT-M707_Instruct_E_r6.indd 64 05.5.9 2:27:28 PM 05.5.9 2:27:28 PM.
An important point after buying a device Kenwood KVT-M707 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KVT-M707 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KVT-M707 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KVT-M707 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KVT-M707 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KVT-M707, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KVT-M707.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KVT-M707. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KVT-M707 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
