Instruction/ maintenance manual of the product KRC-865 Kenwood
Go to page of 30
KRC-865 ©B64-2155-00 (MW/IW) CASSETTE RECEIVER INSTR UCTION MANU AL KRC-865(M) Cover 01.10.26 5:45 PM Page 1.
— 2 — English Contents Safety precautions ......................3 About Cassette tape ...................4 General features .......................
— 3 — T o prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.
Safety precautions — 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Increasing V olume Press the [ u ] button. Decreasing V olume Press the [ d ] button. V olume Press the [SRC] button. Source required Display T uner "TUNER" T ape "T APE" External .
1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below .
Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below . In T uner source Information Display Frequency Station name "SN.
Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display . 2 Enter Auxiliary input display setting mode Press the [NAME.S] button for at least 2 seconds.
• When the faceplate is kept remove open, according to the <OFF Wait T ime Setting> (page 19) setting, the faceplate is hidden and the power turns OFF . • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
T uner features Prevents tampering with the unit while your car is being serviced etc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open. When the time set in <OFF Wait T ime Setting> (page 19) lapses, the faceplate is hidden and the power turns OFF .
Putting the station in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4 ] or [ ¢ ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds.
Cassette player features Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [#1] and [#5] button, press the Reset button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
Indicating the songs to skip, and Fast Forwarding or Rewinding. Skipping to a later song Press the [ ¢ ] button. Each time the button is pressed the number of songs skipped increases. Skipping to a previous song Press the [ 4 ] button. Each time the button is pressed the number of songs skipped increases.
External disc control features Repeating the present song. Press the [REP] button. Each time the button is pressed the Music Repeat turns ON or OFF . When it's ON, "Repeat ON" is displayed. Music Repeat Fast forwarding automatically when an unrecorded portion continues for at least 10 seconds.
Doing Disc Search by entering the disc number . 1 Enter the disc number Press the number buttons on the remote. 2 Do Album Search Press the [DISC+] or [DISC–] button. Canceling Direct Album Search Press the [ 38 ] button. Input "0" to select disc 10.
Selecting the CD displayed in the DNPS of the CDs set in the Disc changer . 1 Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order . Forward / Reverse display Press the [DISC–] or [DISC+] button.
Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second.
1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "Clock Adjust" display . Manual Clock Adjustment Setting the operation check sound (beep sound) ON/OFF . Display Setting "Beep ON" Beep is heard. "Beep OFF" Beep canceled.
Setting the time until the faceplate hide operation starts after the power is turned OFF . The faceplate can be removed only during the set time period.
Setting the displayed text scroll. Display Setting "Scroll Auto" Repeats scroll. "Scroll MANU" Scrolls when the display changes. The text scrolled is shown below .
[VOL.] buttons Adjusting the volume. [SRC] button Each time the button is pressed the source switches. For the source switching order refer to <Selecting the Source> (page 5). [A TT] button T urning the volume down quickly . When it is pressed again it returns to the previous level.
[ 4 ]/ [ ¢ ] buttons Doing track forward and backward. [DISC+]/ [DISC–] buttons Doing album forward and backward. [ 38 ] button Each time the button is pressed the song pauses and plays. [DNPP]/ [OK] button Enters and cancels the <DNPP (Disc Name Preset Play)> (page 16) mode.
— 23 — Accessories Do not use any accessories other than those provided with your unit. If you use other accessories, you may damage the unit. 7. Reconnect the - battery . 8. Press the left part at the upper side of the faceplate once to make the faceplate control panel appear .
English — 24 — ANT. CONT ILLUMI EXT.CONT. P.CONT + + + + FRONT • L FRONT • R REAR • L REAR • R – + REAR FRONT R L FM/AM antenna input 15 10 Rear left output (White) 11 Rear right output .
— 25 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
English — 26 — 1 Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory 8 Removal tool 3 Refer to the section "Removing the faceplate" (page 9) and then reattaching the faceplate.
— 27 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown.
English — 28 — T roubleshooting Guide ✔ O-N switch is set to "O" side. ☞ Set the switch to "N" side. ✔ Unsupported disc changer is connected. 51 ☞ Connect the supported disc changer . (page 3) ? The specified disc does not play , but another one plays instead.
— 29 — The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. E01 ➪ Load the disc magazine properly . No CD in the unit. ➪ Insert the CD. No Disc: No disc has been loaded in the disc magazine.
English — 30 — Specifications FM tuner section Frequency range (50 kHz) ..........................................87.5 MHz – 108.0 MHz (200 kHz) ........................................87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) .....
An important point after buying a device Kenwood KRC-865 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KRC-865 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KRC-865 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KRC-865 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KRC-865 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KRC-865, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KRC-865.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KRC-865. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KRC-865 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
