Instruction/ maintenance manual of the product KRC-509S Kenwood
Go to page of 33
KRC-609 KRC-509S © B64-1911-10 (KW) Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new cassette-receiver.
— 2 — English Contents Safety precautions ................................................3 General features Power ............................................................................................5 V olume ..............................
— 3 — T o prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.
— 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer .
This function allows you to turn down the volume quickly. T urning Attenuator On/Off: Press the A TT button to switch the attenuator on and of f. When the attenuator is on, the A TT indicator blinks. When the attenuator is off, the volume returns to the original level.
Adjust various parameters of sound quality . Press the AUD button for at least one second to enter the control mode. Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display , and pressing the AM button reverses it.
Y ou can recall the best audio setting preset for different types of the music. Switching the Preset Sound Setting: Each time you press the Q button, the preset sound setting switches as follows: As you proceed, each indicator would go on.
Press the upper side of the faceplate. Holding the center part of the faceplate, pull it out. Push back the bottom of the faceplate bracket until it locks. • Do not apply excessive force to the faceplate bracket without attaching the faceplate. Doing so will cause the faceplate bracket to be deformed.
T uner features connector on the faceplate bracket to malfunction. Press the right side of the faceplate until it locks. Hiding the control panel: Press the release button and slide open the faceplate. Push upward the back of the control panel and reverse the panel.
Y ou can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later . This function is especially useful when you are travelling and do not know what stations are available.
Y ou can change the display used when listening to the radio. Changing the Display: Each time you press the DISP button, the display changes as follows: Station frequency SNPS name (only when being preset) Switching Display for T uner Assigning Names Press the NAME.
Loading and Playing Cassettes: Press the release button to slide open the faceplate, showing the cassette insertion slot. Holding the cassette with the tape exposed to the right, insert it in the slot. The tape will start playing. Push back the bottom of the faceplate with your hand until it locks.
Skip forward or backward to other tracks during playback. Skipping to Beginning of Current T rack or to Previous T racks (Rewind DPSS): Press the 4 button. Press once to rewind to the beginning of the current track, twice to rewind to the beginning of the previous track, and so forth.
Switch the display that appears while tapes are playing. Switching the T ape display : Each time you press the DISP button, the display during tape play switches as follows: The tape counter is not exact, but only represents an approximation of the elapsed time.
This function permits the connection of optional players and the playing of discs. Playing Discs: Press the SRC button repeatedly to select the external disc control mode. The disc will start playing. The external disc control mode will differ , depending on the unit that is connected.
Search forward or backward through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse T rack Search: Press the 4 button to display the desired track number . Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth.
Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the T rack Scan: Press the SCAN button. “ Scan ON ” is displayed and the first 10 seconds of each track will be played, in order .
Store the names of discs to be displayed when played. Play the disc whose name you want to preset. • This function is not available for disc changers that do not feature the Disc Name Preset function.
that you have already stored a name for , the name will be displayed for it, too. • If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. • Pressing the reset button does not erase the disc names stored in a disc changer .
When the battery is removed from the unit's power switch, you cannot turn on the unit again unless the preset security Security Code Y ou can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations.
This function produces a beep sound that accompanies button operation. It can be switched on or off. Display and setting: "Beep ON" : Beep setting is on. (Default setting) "Beep OFF" : Beep setting is off. The beep sound is not output from the preout jacks.
Y ou can dim the display . The dimmer function is not available for units if the dimmer wire is not connected. Display and setting: "Dimmer ON" : The dimmer setting is on. (Default setting) "Dimmer OFF" : The dimmer setting is off.
This function permits the CD text and MD title to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted.
English — 24 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION ..........................................1 ............
— 25 — Connecting Wires to T erminals ANT. CONT. ILLUMI P.CONT + + + + FRONT • L FRONT • R REAR • L REAR • R – + When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear).
English — 26 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). NOTE Accessory 2 Metal mounting strap Self-tapping screw (commercially available) Firewall or metal support Accessory 6 Installation ■ Installation 6 mm MAX.
— 27 — Installation Removing the hard rubber frame ■ When the upper level is removed, remove the lower two locations. 3 The frame can be removed from the bottom side in the same manner . NOTE Catch Lock Refer to the section “ Theft deterrent faceplate (P .
English — 28 — Installation Accessory 7 If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below . Refer to the function "Theft Deterrent Faceplate" (page 8) and remove the faceplate.
— 29 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. T roubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM Nothing happens when the buttons are pressed.
English — 30 — T roubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM The tape head is dirty . Clean the tape head, referring to the section on "Cleaning the tape head" (see p. 4). No sound can be heard, or the volume is low . The fader or balance settings are set all the way to one side.
— 31 — External disc control mode The computer chip in the unit is not functioning normally . Press the reset button on the unit (see p. 4). The disc control mode cannot be selected. No wire has been connected to the disc changer input terminal on the unit.
English — 32 — T roubleshooting Guide The following messages are displayed when certain problems are occurring in your system. T ake the recommended actions. Nothing has been recorded on the MD. Blank DISC No disc magazine has been loaded in the changer .
— 33 — Specifications FM tuner section Frequency range (200 kHz space) .............87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) ................... 9.3 dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) .............. 15.2 dBf (1.6 µV/75 Ω ) Frequency response ( ± 3 dB) .
An important point after buying a device Kenwood KRC-509S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KRC-509S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KRC-509S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KRC-509S you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KRC-509S will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KRC-509S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KRC-509S.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KRC-509S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KRC-509S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
