Instruction/ maintenance manual of the product KDV-MP5042U Kenwood
Go to page of 42
D VD-RECEIVER KD V -415U KD V -MP5042U INSTR UCTION MANU AL © B64-4427-00/00 (KW/RW) T ake the time to read through this instruction manual. F amiliarity with installation and operation procedur es will help you obtain the best performance from your new DVD-rec eiver .
2 | KDV-415U/ KDV-MP5042U Con te n ts Before use 3 F or first use 7 Before using this unit f or the first time Language Setup DSP Setup Basic Operation of c ontrol panel 8 General functions T uner fun.
English | 3 Before use 2 W ARNING T o prev ent injury or fire, take the f ollowing precautions: • T o prevent a short circuit, never put or leav e any metallic objects (such as coins or metal tools) inside the unit. How to reset y our unit • If this unit or the connected unit (disc auto changer , etc.
4 | KDV-415U/ KDV-MP5042U Before use List of playable discs Disc types Standard Support Remark DVD DVD V ideo ‡ D TS not supported. DVD Audio × DVD-R ‡ MP3/WMA/W A V/JPEG/ MPEG/DivX Playback Mult.
English | 5 About Picture files • Acc eptable picture files JPEG • Extensions jpg, jpeg • Acceptable media CD-R/R W/ROM, DVD±R/R W, mass-st orage -class USB device Acceptable discs, disc f ormats, USB device file system, file and folder names and playing or der are the same as those for audio files.
6 | KDV-415U/ KDV-MP5042U Region codes in the w orld The DVD players are given a r egion code according to the country or area it is marketed, as shown in the following map . Operation regula tory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing.
English | 7 For first use Language Setup Set a language used for screen displa y, DVD subtitles, etc. • “Language ” item of the Setup menu (page 13) DSP Setup T o get clear sound, set the sound .
8 | KDV-415U/ KDV-MP5042U Gene ral func tio ns Power/Source S ele c t but ton: [S R C] T urns o n the power. When th e power is on, the s ource switches b et ween T un er (“ TUNER ” ), US B or iPod (“ USB” or “iPod” ), DVD (“DVD ” ), A V inpu t (“ AVIN” ), and Standby (“S T ANDBY” ) each time this bu t ton is presse d.
English | 9 DVD / US B/ iPod play fu nct ions Dis c play : Disc slot Star ts play ing wh en a disc is inser te d. When a dis c is inser ted, th e “IN” indi cator is ON. ⁄ • Do not attempt to insert a disc into the slot if another one is already there.
10 | KDV-415U/ KDV-MP5042U Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed . : Can be set in other than standby state. : Can be set in standby state. : Can be set only dur ing playback of the iPod sour ce.
English | 11 “MENU” Item Setting Entry Setting overview Condition Page “CODE SET”/ “CODE CLR” 1 sec. Sets/Resets security code. 24 “DIM” “OFF”*/ “ON” 4 / ¢ Adjusts the brightness of the display according to the surrounding illumination.
12 | KDV-415U/ KDV-MP5042U 4 Press the [ 2 ]/[ 3 ] button to select the menu. LANGU AGE/ PIC TURE/ AUDIO/ O THER 5 Press the [ 5 ]/[ ∞ ] button to select the desired item, and then press the [ENTER] button. T o cancel pop-up menu, press the [RETURN] ✍ button.
English | 13 L AN GUAG E Item Setting MENU LANGUA GE/ AUDIO LANGU AGE Selects the initial disc menu language and audio language. Refer to the language code list (page 35). SUBTITLE Selects the initial subtitle language or remove the subtitle (OFF). Refer t o the language code list (page 35).
14 | KDV-415U/ KDV-MP5042U In iPod sour ce Information Display Music title & Artist name “TITLE” Album name & Artist name “ ALBUM” Play time & Music number “P- TIME” Clock “C.
English | 15 A V Input Display Setting Selecting the display when changing to A V IN or AUX sour ce. 1 Select A V IN source Press the [SRC] button. Select the “ A VIN” display . 2 Enter A V input display setting mode Press [ ] 1 sec. , and select “MENU” > “NAME SET ” .
16 | KDV-415U/ KDV-MP5042U Disc/ U SB Operations of Remote C ontrol Befo re Use • T ur n on the moni tor to watch the playba ck pic ture. If you tur n on the mo nitor , you c an also control playb ack of other dis cs by refer ring to the mo nitor screen.
English | 17 Displaying Sta tus and Contr ol on-screen DVD-VIDEO DVD-VIDEO DVD-VR DVD-VR Video CD Video CD MPEG/DivX® MPEG/DivX® JPEG JPEG Y ou can display various information about the disc loaded on-screen.
18 | KDV-415U/ KDV-MP5042U T ime Search DVD-VIDEO DVD-VIDEO DVD-VR DVD-VR Video CD Video CD The Time Search function allows you to start playing at any chosen time on the disc. 1 Press the [ OSD] button twice briefly during playback 2 Press the [ 2 ] or [ 3 ] button to select the Time Search icon in the on-screen displa y.
English | 19 DVD-VR DVD-VR Chapter search (“CHAP”), Prog ram/Play list search (“PRGM”/ ”PLST ”), and Search mode off. Video CD Video CD CD CD T rack search (“ TRAC”/“NMBR ”) and Search mode off.
20 | KDV-415U/ KDV-MP5042U iP od Operations of Remote Con trol 3 Search for music/video Operation type Operation Movement between items Press the [ 5 ] or [ ∞ ] button. Selection of item Press the [ENTER] or [ 3 ] button. Return to previous it em Press the [ 2 ] or [MENU] button.
English | 21 Music disc/ Audio file/iPod Oper ation of Control P anel Music/V ideo Search Audio File Audio File CD CD MPEG/DivX® MPEG/DivX® JPEG JPEG Selecting the track/ file you want to listen to from the device or media being played now . 1 Enter Music/V ideo Search mode Press the [ ] button.
22 | KDV-415U/ KDV-MP5042U iPod C ontrol by Hand Mode Allows you to operat e iPod with the control on the iPod . Display Setting “HANDS ON” iPod c ontrol by hand mode is ON. “MODE OFF” iPod c ontrol by hand mode is OFF . 1 Enter iPod C ontrol by Hand Mode Press [ ] 1 sec.
English | 23 Basic Operation of Disc Changer ( Optional) Selecting CD changer source Press the [SRC] button. Select the “CD CH” display. Playing or pausing Press the [6] button. Music search Press the [ 4 ] or [ ¢ ] button. Changes the music when this button is pressed.
24 | KDV-415U/ KDV-MP5042U T uner Operation F unction of KDV-MP5042U Fr equenc y Step Setting Changing the tuning frequency step. The original setting is F M band 50 kHz. 1 T urn the power OFF Press the [SRC] button for at least 1 sec ond. 2 Switch the frequency step While pressing the [1] and [5] buttons , press the [SRC] button.
English | 25 Deactivating Security Code Deactivating the Security Code function. 1 Select Standby Press the [SRC] button. Select the “ST ANDBY” display. 2 Enter Security Code mode Press [ ] 1 sec. , and select “MENU” > “C ODE CLR” . Press the [ AUD ] knob for at least 1 second.
26 | KDV-415U/ KDV-MP5042U Audio Con trol Y ou can adjust following Audio C ontrol items ; Adjustment Item Display Range Rear volume “R-VOL ” 0 — 35 A V output volume “ A VVOL ” 0 — 35 Sub.
English | 27 Preset position “PRESET” Adjustment Item Display Not compensating . “ ALL ” Fr ont-Left seat “F-LEFT” Adjustment Item Display Fr ont-Right seat “F-RIGHT” Fr ont seat “F-.
28 | KDV-415U/ KDV-MP5042U Audio A djustments Cabin Selec tion Y ou can compensate the delay of the sound arrival time by selecting your environment fr om the following car types; Car type Display Not compensating .
English | 29 D T A (Digital Time A lignment) Setting Adjusting fine tuning of the speaker position compensation value specified at <Cabin selection> (page 28). 1 Enter D T A setting mode Press [ ] 1 sec. , and select “DSP ” > “SE TUP” > “DT A ” .
30 | KDV-415U/ KDV-MP5042U Audio A djustments Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 30). 1 Select the source Press the [SRC] button. 2 Enter Audio Pr eset Recall mode Press [ ] 1 sec. , and select “DSP ” > “PRESET ” > “RECALL ” .
English | 31 Basic Operation Selecting S atellite Radio source Press the [SRC] button. Select the “SA T ”/ “SIRIUS”/ “XM” display . ⁄ • Y ou need to register to the service provider to receive the service by Satellite Radio. Consult the ser vice provider if “CALL … TO SUBSCRIBE” appears.
32 | KDV-415U/ KDV-MP5042U Basic Operations of Remote C ontrol OSD R.VOL MENU ENTER DVD U AUD U 1 2 ABC 3 DEF 4 GHI 7 PQRS 5 JKL 8 TUV 0 9 WXYZ 6 MNO AUDIO ANGLE DIRECT AT T 2 ZONE VOL ZOOM RETURN SRC O O O O O O TOP MENU SETUP SUBTITLE DVD U AUD U SRC AUDIO FM+/AM– / D 0 — 9 AT T 2 ZONE VOL R.
English | 33 Appendix About Satellite Radio tuner (Optional) This unit supports Satellite Radio tuners which are released by SIRIUS and XM. Refer to the instruction manual of Satellite radio tuner .
34 | KDV-415U/ KDV-MP5042U 1 Set the front and rear positions and the height of the refer ence point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior . 2 Measure the distances from the ref erence point to the speakers.
English | 35 Code Language ENGLISH E nglish SP ANISH Spanish FRENCH F r ench GERMAN G erman IT ALIAN Italian DUT CH Dut ch SWEDISH S w edish DANISH D anish RUSSIAN Russian CHINESE C hinese PORTUGUESE .
36 | KDV-415U/ KDV-MP5042U Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 4 ..........4 2 ..........2 5 ..........4 3 ..........1 Installation Proc edure 1. T o prevent a shor t circuit, remove the key from the ignition and disconnect the - battery.
English | 37 C onnec ting Wires to T e rminals P .CONT ANT . CONT MUTE R L PRK SW VIDEO OUT Battery Ground wire (Black) - ( T o car chassis) FM/AM antenna input Visual output ( Y ellow) F use (10A) Wi.
38 | KDV-415U/ KDV-MP5042U Installation/Remo ving the Unit Non-Japanese cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
English | 39 T roubleshoot ing Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer . • Cannot set up the low pass filter . • Cannot set up subwoof er phase. • No output from the subwoof er .
40 | KDV-415U/ KDV-MP5042U T roubleshoot ing Guide The messages shown belo w display your systems condition. TOC ERR: • The disc is quite dirt y. The disc is upside - down. The disc is scratched a lot. • No disc has been loaded in the disc magazine.
English | 41 Specifications subject to change without notice. FM tuner section Fr equency range 200 kHz space : 87.9 MHz – 107.9 MH z 50 kHz space (KDV-MP5042U) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 V/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
is a trademark of DVD Format/Logo Licensing Corporation registered in the U .S., Japan and other countries. This product incorporates copyright protection technology that is protected by U .
An important point after buying a device Kenwood KDV-MP5042U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDV-MP5042U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDV-MP5042U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDV-MP5042U you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDV-MP5042U will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDV-MP5042U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDV-MP5042U.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDV-MP5042U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDV-MP5042U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
