Instruction/ maintenance manual of the product KDC-W534 Kenwood
Go to page of 36
© B64-3266-00/00 (EW/EN/E2W/E2N) CD-RECEIVER KDC-W534 KDC-W534Y INSTR UCTION MANU AL B64-3266-00_English.Indd 1 B64-3266-00_English.Indd 1 05.10.21 9:51:22 AM 05.
2 | English Con tents Safety precautions 3 Notes 4 About AA C, MP3 and WMA 6 About CDs 7 General featur es 8 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Se.
English | 3 Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot If you tr y to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. Lens F ogging When you turn on the car heater in cold weather , dew or condensation may form on the lens in the CD player of the unit.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button.
English | 5 This Pr oduct is not installed by the manufac turer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
6 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not conforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 7 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
8 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. V olume Increasing V olume T urn the [ VOL] knob clockwise. Decreasing V olume T urn the [ VOL] knob counterclockwise.
English | 9 Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [ Q] button. When you press the button once , the current sound setting is displayed.
10 | English General fea tures Audio Setup Setting the Sound system, such as Volume offset and Loudness. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob.
English | 11 Dimmer Con trol Y ou can lower the brightness of the display by using the dimmer function. Press the [DIM] button f or at least 1 second. Each time you press the button f or 1 second, the Dimmer control turns ON or OFF . When the Dimmer control is ON, "DIM ON" is displayed.
12 | English General fea tures Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Press the Release butt on. Drop open the faceplate. 2 Drawing the fac eplate to left side pull it to forward and remov e it.
English | 13 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
14 | English T uner features Station Pr eset Memor y Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequency to put in the memor y Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
English | 15 RDS featur es F unction of the KDC-W534 T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio . Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF .
16 | English RDS featur es F unction of the KDC-W534 Progr am T ype preset Putting the Pr ogram Type in the P reset button memory and quick recall. Presetting the Progr am T ype 1 Select the Program T ype to preset Refer to <PTY (Program Type)> (page 16).
English | 17 Changing Language for PTY Function Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 16). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob towards [FM] or [ AM].
18 | English CD play er featur es Playing CD & A udio file When there is no disc inserted 1 Drop open the faceplate Press the Release button. 2 Insert a disc.
English | 19 F ast Forwarding and Re versing F ast Forwarding Hold down towar d [ ¢ ] with the Control knob. Release your finger to play the disc at that point. Reversing Hold down towar d [ 4 ] with the Control knob. Release your finger to play the disc at that point.
20 | English CD play er featur es F unction of Audio file Folder Select Quickly selecting the folder you want to hear . 1 Enter F older Selec t mode Press the [F .SEL] button. "FOLD SEL " is displayed. During Select mode the folder information is displayed as shown below .
English | 21 Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
22 | English Menu system In Standby mode T ouch Sensor T one Setting the operation check sound (beep sound) ON/OFF . Display Setting "BEEP ON" Beep is heard. "BEEP OFF" B eep canceled. In Standby mode Manual Clock Adjustment • Y ou can do this adjustment when the <Synchronize Clock> (page 22) is set as OFF .
English | 23 In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kH z)) are played , this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate.
24 | English Menu system F unction of the KDC-W534 AF (A lternative F requency) When the reception is poor , automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting " AF ON" The AF function is ON.
English | 25 In Standby mode Po wer OFF Timer Setting the timer to turn this unit’ s power OFF automatically when Standby mode continues. Using this setting can save the v ehicle’ s battery power . Display Setting "OFF – – –" Po wer OFF Timer function is OFF .
26 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........2 5 ..........1 6 ..........1 Installation Proc edure 1. T o prevent short circuits, remov e the key from the ignition and disconnect the - terminal of the battery.
English | 27 Connecting W ires to T erminals P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 REMO. CONT MUTE Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) T o connect the Kenwood navigation system, consult your navigation manual.
28 | English Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White P ower Contro.
English | 29 Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off . 1 Ref er to the section <Removing the hard rubber frame> (page 30) and then remove the hard rubber frame. 2 Drop open the faceplat e by pressing the Release button.
30 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the r emoval tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is r emoved, remove the lower two locations.
English | 31 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn.
32 | English Disc source ? The specified disc does not play , but another one plays instead . ✔ The specified CD is quit e dir ty. ☞ Clean the CD. ✔ The disc is sev erely scratched. ☞ T r y another disc instead. ? Can ’t remove disc . ✔ The cause is that mor e than 10 minutes has elapsed since the vehicle ACC swit ch was turned OFF .
English | 33 The messages shown belo w display your systems condition. TOC ERR: The CD is quite dirty. The CD is upside- down. The CD is scratched a lot. ➪ Clean the CD and load it correctly. E-05: The CD is upside -down. ➪ Load the CD correctly. E-99: The unit is malfunctioning for some reason.
34 | English Specifications subject to change without notice. WMA decode : Compliant with Windows Media Audio AAC decode : AAC-L C " .m4a" files Audio section Maximum output power : 50 W x 4 (KDC-W534Y ) : 45 W x 4 (KDC-W534) Output power (DIN 45324, +B=14.
B64-3266-00_English.Indd 35 B64-3266-00_English.Indd 35 05.10.21 9:51:51 AM 05.10.21 9:51:51 AM.
B64-3266-00_English.Indd 36 B64-3266-00_English.Indd 36 05.10.21 9:51:51 AM 05.10.21 9:51:51 AM.
An important point after buying a device Kenwood KDC-W534 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-W534 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-W534 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-W534 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-W534 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-W534, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-W534.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-W534. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-W534 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
