Instruction/ maintenance manual of the product KDC-W5031 Kenwood
Go to page of 36
CD-RECEIVER KDC-W5031 KDC-W531 INSTR UCTION MANU AL © B64-2952-00/00 (EW/E2W) B64-2952-00_English.indd 1 B64-2952-00_English.indd 1 04.11.8 10:47:01 AM 04.
2 | English Con tents Safety precautions 3 Notes 4 About CDs 5 About MP3 and WMA 6 General featur es 7 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting .
English | 3 Safety precautions About CD play ers/disc changers connected to this unit (KDC-W5031 only) KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. • P ress the reset button if the disc auto changer fails to operate correctly .
English | 5 Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier t o damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
6 | English About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is out of the specification, may not able to be played normally , or the file and folder names may not be display ed correctly.
English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. • When the power is ON, the <Security Code> (page 22) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
8 | English General fea tures Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time the button is pressed, the Att enuator turns ON and OFF . When it’ s ON, the " A T T" indicator blinks. Sy stem Q Y ou can recall the best sound setting preset for different types of music.
English | 9 4 Adjust the A udio setup item T urn the [ VOL] knob . Adjustment Item Display Range V olume offset "V-OFF" –8 — ±0 Loudness "L OUD" ON/OFF • Volume off set: Each source’ s volume can be set as a difference fr om the basic volume.
10 | English General fea tures Switching Displa y Switching the information displa yed. 1 Enter S witching Display mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob to [ 4 ] or [ ¢ ].
English | 11 Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Press the Release butt on. Drop open the faceplate. 2 Dra wing the faceplate to left side pull it to the front and remov e it.
12 | English T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, F M2, and FM3 bands.
English | 13 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically.
14 | English RDS featur es F unction of the KDC-W5031 T raffic Information Switching to traffic inf ormation automatically when a traffic bulletin starts even when you aren ’t listening to the radio . Press the [TI] button. Each time the button is pressed, the Traffic information function turns ON and OFF .
English | 15 During PT Y mode the "PT Y" indicator is ON. • This function can’t be used during a traffic bulletin or AM reception. 2 Select the Program T ype Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed, the Program Type switches as shown below .
16 | English RDS featur es F unction of the KDC-W5031 Changing Language for PTY Function Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 14). 2 Enter Changing Language mode Press the [TI] button.
English | 17 CD/Audio file/External disc contr ol features SRC SCAN REP F.SEL M.RDM RDM/ 3 IN indicator Disc number Track time Track number Control knob F unction of the KDC-W5031 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
18 | English CD/Audio file/External disc contr ol features F ast Forwarding and Re versing F ast Forwarding Hold down on [ ¢ ] of the Contr ol knob. Release your finger to play the disc at that point. Reversing Hold down on [ 4 ] of the Contr ol knob.
English | 19 T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder y ou’ re listening to . Press the [REP] button.
20 | English CD/Audio file/External disc contr ol features F unction of Audio file Folder Select Quickly selecting the folder you want to listen to . 1 Enter F older Select mode Press the [F .SEL] button. "F-SELEC T" is displayed. During Select mode the folder information is displayed as shown below .
English | 21 Menu system Menu Sy stem Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
22 | English Menu system F unction of the KDC-W5031 In Standby mode Secur ity C ode Because authorization by the Security Code is required when it’ s removed from the vehicle , personalizing this unit is by using the Security Code is a help in preventing theft.
English | 23 F unction of the KDC-W5031 In Standby mode Synchr onize Clock Synchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchr onizes the time. "SYNC OFF" Adjust the time manuall y. • It takes 3 to 4 minutes to synchronize the clock.
24 | English Menu system F unction of the KDC-W5031 Auxiliary Input Display Setting For selecting the display when swit ched to Auxiliary input source.
English | 25 T ext Scroll Setting the displayed text scroll. Display Setting "SCL MANU" D oesn ’t scr oll. "SCL AUT O" Scrolls when the display changes .
26 | English Menu system In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Contr ol knob to [FM] or [AM]. Select the "DEMO" display. 2 Set the Demonstration mode Press the C ontrol knob for at least 2 seconds.
English | 27 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........1 5 ..........2 6 ..........1 7 ..........1 Installation Proc edure 1. T o prevent shor t cir cuits, remove the key from the ignition and disconnect the - terminal of the battery.
28 | English Connecting W ires to T erminals P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 FRONT REMO. CONT MUTE Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) To connect the KENWOOD navigation system, consult your navigation manual.
English | 29 Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White P ower Contro.
30 | English Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
English | 31 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
32 | English T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the following table f or possible problems. General ? The pow er does not turn ON.
English | 33 Disc source ? " AUX EXT" is display ed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 3) of the section on <Safety precautions>.
34 | English The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine.
English | 35 Specifications Specifications subject to change without notice. MP3 decode : Compliant with MPEG-1/2 Audio Layer -3 WMA decode : Compliant with Windows Media Audio Audio section Maximum output power KDC-W5031: 50 W x 4 KDC-W531: 45 W x 4 Output power (DIN 45324, +B=14.
B64-2952-00_English.indd 36 B64-2952-00_English.indd 36 04.11.8 10:47:20 AM 04.11.8 10:47:20 AM.
An important point after buying a device Kenwood KDC-W5031 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-W5031 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-W5031 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-W5031 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-W5031 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-W5031, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-W5031.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-W5031. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-W5031 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
