Instruction/ maintenance manual of the product KDC-U7056DAB Kenwood
Go to page of 41
2 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 3 0. Con tents 1. Before use 4 1-1. Safety precaution 1-2. Impor tant information 1-3. Regulatory Compliance 2. Appendix 6 2-1. T rademarks 3. Basic operations 8 3-1. Component names 3-2. Pr eparations 3-3.
4 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 5 1. Before use 1-1. Safety precaution # W ARNING T o prevent injuries or a fire, take the follo wing precautions: • Stop the car befor e operating the unit. • T o prevent a shor t circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit.
6 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 7 2. Appendix 2-1. T rademarks • The Bluetooth word mark and logos are o wned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
8 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 9 3. Basic operations 3-1. Component names (1) [ 1 / 6 ] button When listening to the iP od, audio file, CD , or radio , press this button to enter the sear ch mode. In each of the selected modes, press the button to return to the previous item.
10 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 11 Basic operations 3-5. General opera tions Powe r Press [SRC] to turn the pow er ON. Press and hold [SRC] to turn the pow er OFF . Source selection Press [SRC]. The source will switch each time upon pr essing the button.
12 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 13 4. DSP settings 4-1. Audio c ontrol Y ou can adjust the audio control items. Press [SRC] to select a source other than Standby (“ST ANDBY”). Refer to <Source selection> (page 10) .
14 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 15 DSP settings 4-4. Speaker setting The speaker X’Over is aut omatically set when the position and size of each speaker are selected from the following items . Press [SRC] to select a source other than Standby (“ST ANDBY”).
16 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 17 DSP settings 4-7. Delay time c ontrol Adjusting fine tuning of the speaker position compensation value specified at <4-3.
18 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 19 DSP settings 4-10. DSP preset Y ou can register the values set the DSP control items. Set the DSP control items Refer to the follo wing operations to setup the Sound Control. - “SubWoof er Level” of <4-1.
20 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 21 5. Listen to the iP od 5-1. Models of iPods/iPhones tha t can be connected to this unit Made for • iPod nano (6th generation) • iPo.
22 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 23 Listen to the iP od 5-8. Playback mode Y ou can selec t a playback mode, such as Random play and Repeat play . Press [SRC] to select an iPod (“ iP od”) source . Refer to <Source selection> (page 10) .
24 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 25 5-9. App & iP od mode setting Y ou can selec t a music from iP od when App & iP od mode is set to ON. Press [SRC] and select an iPod (“ iP od”) source using [C ontrol] knob . Refer to <Source selection> (page 10) .
26 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 27 6. Pandor a® (KDC-U7056D AB/ KDC-U7056BT) 6-1. Requirements P andora® Requirements for listening t o the Pandora® ar e as follows: iPhone or iPod touch • Use an Apple iPhone or iP od touch running under iOS3 or later .
28 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 29 Pandor a® 6-7. Deletion of station Y ou can delete registered station inf ormation from your station list. Press [ Con trol] knob . Enters the F unction setting mode. Select “S tation Delete ” using [Contr ol] knob.
30 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 31 7. Aha Radio 7-2. Listening to the Aha Radio Android • Y ou need to r egister your cell phone bef ore using it with this unit. See <13-2. Registering a Bluetooth device> (page 62) .
32 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 33 7-5. Calling a number in the con tent Y ou can call the phone number obtained from the content from a smartphone connected to this unit via Bluetooth. Press and hold [ Con trol] knob . “Make a call” appears.
34 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 35 8. Listen to the CD/ A udio file 8-1. Playing music Playing a disc Open the Disc slot cover up ward. Insert a disc in the Disc slot. When it is inserted, the source is switched automatically and playback starts.
36 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 37 8-6. Direct music search (F unction of remote control) Y ou can search for music by entering the track number . Press [DIRECT] on the remote control. “– – –” appears and enter the Direct Music search mode.
38 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 39 8-9. About “KENWOOD Music Editor Light” and “KENWOOD Music Contr ol” • This unit supports the PC application “KENW OOD Music Editor Light” (hereinafter “KME-Light ”), and Android™ application “KENW OOD Music Control” (hereinafter “KMC”).
40 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 41 9. Listen to the tuner 9-1. Listening to the radio Selecting a tuner source Press [SRC] to select a T uner (“TUNER”) source. Refer to <Source selection> (page 10) . Selecting a band (FM or AM) Press [ R ].
42 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 43 Listen to the tuner 9-5. T uner setting Y ou can set up the tuner . Press [SRC] to select a T uner (“ TUNER”) source. Refer to <Source selection> (page 10) . Press [ Con trol] knob .
44 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 45 Listen to the tuner 9-8. Frequency step setting (F unction of KDC-U7056BT/ KDC-U7056BTL) Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. Press and hold [SRC].
46 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 47 10. Listen to the Digital Radio (KDC-U7056DAB) 10-3. Recall preset service Recall the service in the memor y . Press [ 1 / 6 ] twice . Enter the Pr eset memory mode. T urn [ C ontrol] knob to select a memory number (“1” – “18”).
48 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 49 Listen to the Digital Radio 10-5. Alphabet Search for service Y ou can selec t an alphabetic character from the service list. Press [ 1 / 6 ]. Press and hold [ Con trol] knob . Enter the Alphabet Search mode Select a character using [Con trol] knob.
50 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 51 Listen to the Digital Radio 10-8. Replay Y ou can replay last about 7 minutes (audio bit rate: 128 kbps) of current ser vice. Press [ R ] “Replay Mode” appears and enters the Replay mode.
52 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 53 11. Display settings 11-1. Selecting a display type Shown below are examples of displa y types. Press [ Con trol] knob . Enters the F unction setting mode. Select “DISP&ILLUMI” > “Display Select ” > “T ype Select ” using [Contr ol] knob.
54 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 55 Display settings 11-5. Selecting a text display Y ou can change the information displayed on each of the following sourc es: Press [ Con trol] knob .
56 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 57 Display settings 11-6. Display & Illumination setting Y ou can set the display and illumination. Press [ Con trol] knob . Enters the F unction setting mode. Select “DISP&ILL UMI” using [C ontrol] knob .
58 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 59 12. General settings 12-1. Adjusting the da te Press [ Con trol] knob . Enters the F unction setting mode. Select “Settings” > “Clock&Da te ” > “Date Adjust” using [Contr ol] knob.
60 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 61 General settings 12-5. Initial settings Y ou can configure initial settings of this unit. Press [SRC] to select a Standby (“ST ANDB Y”). Refer to <Source selection> (page 10) . Press [ Con trol] knob .
62 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 63 13. Registering a Bluetooth 13-2. Registering a Bluetooth devic e Y ou can r egister your Bluetooth device in this unit. Start registering a unit by operating the Bluetooth device . Operate the Bluetooth device to request this unit for connection.
64 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 65 13-5. Bluetooth device r egistra tion test Y ou can check whether a Bluetooth device can be register ed by operating this unit. Press [ Ú ]. “BT MODE” appears and enter the Bluetooth mode.
66 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 67 14-3. Dialing a number Press [ Ú ]. “BT MODE” appears and enter the Bluetooth mode. Select “Number Dial” using [Con trol] knob . F or how to use [Contr ol] knob, refer to <3-3.
68 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 69 Hands-free phoning 14-5. Speed dialing (Preset dial) Press [ Ú ]. “BT MODE” appears and enter the Bluetooth mode. Select “Pr eset Call” using [Con trol] knob . F or how to use [Contr ol] knob, refer to <3-3.
70 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 71 Hands-free phoning 14-9. Voic e C ontrol This unit can access the voic e recognition function of the connected cell phone. Y ou can search the phone book by voice . ( The function depends on the cell phone.
72 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 73 15. Bluetooth audio 15-1. Before use • Y ou need to r egister your Bluet ooth audio player before using it with this unit. F or mor e details, see <13-2. Registering a Bluetooth device> (page 62) .
74 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 75 16. Bluetooth settings 16-1. Registering the PIN code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. Press [ Ú ]. “BT MODE” appears and enter the Bluetooth mode.
76 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 77 Bluetooth settings 16-6. Bluetooth detail setting Y ou can configure the initial settings of this unit. Press [ Ú ]. “BT MODE” appears and enter the Bluetooth mode. Select “Settings” > “Detailed S ettings” using [C ontrol] knob .
78 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 79 17. Basic operation of r emote c ontrol search mode: [ R ]/[ S ] • Return to previous folder: [ 6 ] On iPod sourc e • Enter Music s.
80 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 81 18. T roubleshooting guide 18-1. Setting error Some functions of this unit may be disabled by some settings made on this unit. ö Cannot set up display . Í The demonstration mode is not turned off as mentioned in <12-4.
82 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056B TL English | 83 T roubleshooting guide Í Registration of the station has failed. ö “Station limit” Í The number of register ed stations has reached the upper limit. ò Retr y after deleting an unnecessary station.
An important point after buying a device Kenwood KDC-U7056DAB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-U7056DAB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-U7056DAB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-U7056DAB you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-U7056DAB will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-U7056DAB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-U7056DAB.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-U7056DAB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-U7056DAB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
