Instruction/ maintenance manual of the product KDC-U40R Kenwood
Go to page of 19
KDC-U40R KDC-U30R CD-RECEIVER INSTRUCTION MANUAL CD-RECEIVER BEDIENUNGSANLEITUNG РAДИОПРИЕMНИК С KOMПAKT –ДИСKAMИ ИHCTPУKЦИЯ ПO ЭKCПЛУA T AЦИИ АВТОМАГНІТОЛ.
2 Safety 2 Preparation 4 How to attach/detach the faceplate How to reset your unit Basic operations 4 Getting started 6 Canceling the display demonstration Setting the demonstration mode Adjusting the.
3 ENGLISH Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Pr oducts and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
4 Preparation How to attach/detach the faceplate 2 1 1 2 Do not expose the faceplate to direct sunlight, excessive heat, or humidity . Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached.
5 ENGLISH When you press or hold the f ollowing button(s)... Button General operation SRC T urns on. T urns off if pressed and held. Selects the available sources ( TUNER, USB/ iPod, CD , AUX, ST ANDBY ), if the power is turned on. • If the source is ready, playback also starts.
6 Getting started Canceling the display demonstration The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), the display shows: [CANCEL] [ DEMO] [PRESS] [VOLUME] [KNOB] 1 Press the volume knob.
7 ENGLISH Item Selectable setting (Preset: *) PRESET TYPE NML *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ; TYPE MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).
8 Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS] , then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection.
9 ENGLISH Item Selectable setting (Preset: *) REGIONAL REG ON *: Switches to another station only in the specific region using the “AF” control. ; REG OFF: Cancels. ATP SEEK ATPS ON *: Automatically searches for a station with better reception when the traffic information‘s reception is poor.
10 Start playing a disc 1 Press SRC to turn on the power. 2 Insert a disc into the loading slot. Playback starts automatically. 3 Press number button 6 ( ) to resume/ pause playback (if necessary). Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.
11 ENGLISH Selecting Repeat Play Press number button 4 (REP) repeatedly to make a selection. Audio CD : TRAC REP (track repeat), REP OFF (repeat off) AAC/MP3/WMA : FILE REP (file repeat), FOLD REP (fo.
12 Selecting a song by alphabet 1 Press (BAND) to enter Music Search mode. “SEARCH” appears. 2 Turn the volume knob to select a category, then press to confirm. 3 Press (BAND) again to enter alphabet search mode. “SRCH – – – ” appears. 4 Turn the volume knob to select the character to be searched for.
13 ENGLISH 1 To enter [AUD CTRL] menu (see table below): Press AUDIO . To enter [SETTINGS] menu (page 14): Press the volume knob to enter [FUNCTION] mode. Turn the volume knob to select [SETTINGS] , then press to enter. 2 Turn the volume knob to make a selection, then press to confirm.
14 Item Selectable setting (Preset: *) DTIL SET LPF SW LPF THRU *: All signals are sent to the subwoofer. ; LPF 85H/ LPF 120H/ LPF 160H: Frequencies higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.
15 ENGLISH Symptom Remedy/Cause The unit does not work at all. Reset the unit. (page 4) [OFF WAIT] does not work. Turn off the demonstration mode. (page 6) Radio reception is poor. / Static noise while listening to the radio. Connect the antenna firmly.
16 Installation/connection Part list: A F aceplate.............................................................. (×1) B Escutcheon ......................................................... (×1) C Mounting sleeve .....................................
17 ENGLISH Wiring connection REMOTE CONT STEERING WHEEL REMOTE INPUT MUTE P . CONT ANT CONT RL REAR/SW Fuse (10 A) Antenna terminal (JASO) Light blue/yellow (Steering remote control wire) To the steer.
18 Installing the unit Removing the unit 2 1 Connect the wiring harness to the unit. Other wiring connection has been completed earlier . (page 17) Before attaching , make sure the direction of the escutcheon is correct. ( Wider hooks on the top side.
19 ENGLISH USB interface USB standard: USB1.1/ 2.0 (F ull speed) Maximum supply current: DC 5 V 1 A File system: F A T16/ 32 AAC decode: AAC-L C “ .m4a” files MP3 decode: Compliant with MPEG-1/2 Audio Layer-3 WMA decode: Compliant with Windows Media Audio Audio section Maximum output power: 50 W × 4 Output power (DIN 45324, +B = 14.
An important point after buying a device Kenwood KDC-U40R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-U40R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-U40R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-U40R you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-U40R will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-U40R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-U40R.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-U40R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-U40R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
