Instruction/ maintenance manual of the product KDC-U346 Kenwood
Go to page of 24
CD-RECEIVER KDC-U446 KDC-U346 KDC-U5046 KDC-U4046 KDC-U3046 INSTR UCTION MANU AL © B64-4531-00/00 (MW/M0).
2 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Con te nt s Before U se 3 Basic Operations 4 Before Using Common Operation Playing Music (CD/USB/iP od) Listening Radio General 6 Removing the F.
English | 3 Before Use 2 W ARNING T o prev ent injury or fire, take the f ollowing precautions: • T o prevent a short circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode.
4 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Basic Operations Before Using Exit of the Demonstration Mode T urn off the demonstration mode when you use it for the first time after installation.
English | 5 Playing Music ( CD/USB/iPod) Playing Disc Inser t a disc into the disc slot. When inserted, the source is switched automatically and a song starts playing. Playing USB devic e Connect a USB device or iPod t o the USB terminal. When connected, the source is switched automatically and a song is starts playing.
6 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Gener al Removing the F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Detach the faceplate Press the Release button. Reattaching the F aceplate Refer to the follo wing diagram when reattaching the faceplat e.
English | 7 Display Indicat or KDC-U346/ KDC-U4046/ KDC-U3046 u v q KDC-U446/ KDC-U5046 pq r s tu 1 “ A T T“ indicator : Blinks when the attenuator function is on. Use the remote control to turn on/off the attenuator function (page 16). 2 “ST“ indicator: Lights when a stereo broadcast is received .
8 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Fu n c t i o n S e t t i n g Perform configuration for this unit. Y ou can set up the following functions. 1 Select a source Press the [SRC] button. Items to be displayed vary depending on the selec ted source.
English | 9 “ T Y PE MIX” : A total of 6 st ations ca n be assign ed to a total of 6 preset b ut tons regardl ess of b and (FM 1, FM2, F M3 MW , SW1 , and SW2).
10 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 ˚ Subwo ofe r Low Pass Fi lter : “LPF SU B -W”/ “LP F SUB WOOF ER” ➤ “85” , ”120”, ”1 6 0 ”, ”TH RO U GH ”( O F F) *.
English | 11 Function items appearing when the CD & audio file source is selected “ AUDIO CONTROL ”/ “ AUDIO C TRL ” “SUB-W SET ”/“SUB WOOFER SET ” " “BASS BOOST ” Æ “S.
12 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Music Disc/ Audio F ile Operation Play F unction Repeat play Press the [4] button. Switches between T rack Repeat (“ TRAC REPEA T ”/ “ TRACK REPEA T ”) and OFF (“REPEA T OFF”) when pressed while playing a CD .
English | 13 F unction of KDC-U446/ KDC-U5046 with iPod Alphabet Search Y ou can select a song by alphabet. T his function searches songs whose name contain the specified character(s) in the list of the selected browse item (artist, album, etc). 1 Enter Music Search mode Press the [ ] button.
14 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Music Disc/ Audio F ile Operation F unction of KDC-U446/ KDC-U5046 with iPod iPod C ontrol by Hand Mode Allows you to operat e iPod with the control on the iPod .
English | 15 T uner Operation Fr equenc y Step Setting Changing the tuning frequency step. The original setting is F M band 50 kHz, MW band 9 kHz. 1 T urn the power OFF Press the [SRC] button for at least 1 sec ond. 2 Switch the frequency step While pressing the [1] and [5] buttons , press the [SRC] button.
16 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Basic Operation s of remote control AT T 0 — 9 SRC VOL FM+ AM– EXIT / O AUD ENT DIRECT General con trol Vo l u m e c o n t r o l : [VOL ] Sou rce se le c t: [S RC ] Volume re duce: [A TT] When th e but ton is press ed again, th e volume retur ns to the previous level .
English | 17 Appendix About Audio file • Playable A udio file MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/R W/ROM • Playable disc file f ormat ISO 9660 Level 1/2, Joliet, Romeo , Long file name.
18 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Appendix The marking of products using lasers (Exc ept for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1.
English | 19 Acc essories/Installation Procedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 Installation Proc edure 1. T o prevent a shor t circuit, remove the key from the ignition and disconnect the - battery. 2. Mak e the proper input and output wire connections for each unit.
20 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Con nec ting Wires to T erminals P .CONT ANT . CONT MUTE REMOTE CONT STEERING WHEEL REMOTE INPUT L R Battery Ground wire (Black) - ( T o car ch.
English | 21 Installation /Removing the Unit Non-Japanese Cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
22 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 T roubleshoot ing Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer . • Cannot set up the low pass filter . • No output from the subwoofer .
English | 23 The messages shown belo w display your systems condition. TOC ERROR: The CD is quite dirt y. The CD is upside -down. The CD is scratched a lot. ERROR 05: The disc is unreadable. ERROR 99: The unit is malfunctioning for some reason. ➪ Press the r eset button on the unit.
24 | KDC-U446/ KDC-U346/ KDC-U5046/ KDC-U4046/ KDC-U3046 Specifications subject to change without notice. FM tuner section Fr equency range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 11.
An important point after buying a device Kenwood KDC-U346 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-U346 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-U346 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-U346 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-U346 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-U346, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-U346.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-U346. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-U346 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
