Instruction/ maintenance manual of the product KDC-MPV7026 Kenwood
Go to page of 34
KDC-MPV7026 KDC-MP6026 CD-RECEIVER INSTR UCTION MANU AL © B64-2699-00/0 1 (MW) B64-2699-00_U.S(M).Indd 1 03.11.10, 3:18:21 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 A bout CDs 8 G eneral fea tures 9 Pow er Selecting the Source Volume System Q A udio Control Speaker Setting Switching .
English | 3 Sa fe ty precautions 2 CA UTION To pr event damage to the machine , take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity .
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA Note, however , that the MP3/WMA recording media and formats acceptable are limited . When writing MP3/WMA, pay attention to the f ollowing restrictions. A cce ptable media The MP3/WMA recor ding media acceptable to this unit are CD-ROM, CD-R, and CD -RW.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 G eneral f eatures Powe r Tu rning ON the Pow er Pr ess the [SRC] button. • When the power is ON, the 'Security Code' (page 20) is displayed as "CODE ON" or "C ODE OFF" . Tu rning OFF the Pow er Pr ess the [SRC] button for at least 1 second.
10 | English G eneral f eatures Syst em Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
English | 11 S witching Displa y S witching the information displa yed. Pr ess the [DISP] button. Each time the button is pressed the display switches as shown below .
12 | English G eneral f eatures Sta tion/Disc Naming (SNPS/DNPS) A ttaching a title to a Station or CD . 1 Receive/pla y the station/disc you want to a ttach a title to • A title can’t be attached to an MD . • Refer to the 'Switching Display' (page 11) and select either "DNPS" or "SNPS" .
English | 13 T heft Deterrent F a c eplate T he faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Pr ess the Release button. Drop open the faceplate. 2 Drawing the facepla te to left side pull it to the front and remov e it.
14 | English T uner/T V contr ol features T uning Mode Choose the tuning mode. Pr ess the [A UTO ] button. Each time the button is pressed the Tuning mode switches as shown below . T uning mode Display Operation Au to seek " Auto 1" Automatic sear ch for a station.
English | 15 C anceling Dir ec t A ccess T uning Pr ess the [DIRECT ] button on the remote. Sta tion Preset Memory P utting the station in the memory. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 S elect the frequency to put in the memor y Pr ess the [ 4 ] or [ ¢ ] button.
16 | English CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Drop open the faceplate Pr ess the Release button. 2 I nsert a disc. 3 Pr ess the faceplate on the left side, and r eturn it to its former position.
English | 17 • The MP3/WMA media that this unit can play are CD- R OM, CD-R, and CD-R W . The medium formats must be ISO 9660 Level 1, L evel 2, Joliet, or Romeo. The methods and precautions to be followed f or writing MP3/WMA data are covered in 'Notes on playing MP3/WMA ' (page 6).
18 | English CD/MP3/WMA/External disc control f eatures Tr ack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or MP3/WMA folder y ou’ re listening to . Pr ess the [REP] button. Each time the button is pressed the Repeat Play switches as shown below .
English | 19 • The methods for moving to other f olders in the folder select mode are different fr om those in the folder search mode. See 'Notes on playing MP3/WMA ' (page 6) for details. C anceling the F older Select mode Pr ess the [F .
20 | English Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 21 y our "Car Audio P assport" in this pack age. 1 Enter Standby Pr ess the [SRC] button. Select the "ST ANDBY" display. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second . When "MENU" is displayed , "Securit y" is displayed .
22 | English Menu system S electable Illumination S electing the button illumination color as green or re d. Display Setting "Color Red" T he illumination color is red . "Color Gr een" The illumination c olor is green. S witching Displa y T ype S etting the Display type.
English | 23 In External disc, or Auxiliary input source D ual Zone S ystem M akes the sound different f or the front channel and rear channel. Display Setting "Zone 2 OFF" The fr ont and rear ar e the same source sound . "Zone 2 ON" T he front and r ear are the differen t source sound.
24 | English Basic Operations of r emote L oading and Replacing the battery U se two " AA "-size batteries. Slide the cover while pr essing downwards to r emove it as illustrated . I nsert the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 25 In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations .
A cc essories/ Installa tion Procedur e A cc essories ➀ ..........1 ➁ ..........2 ➂ ..........4 ➃ ..........4 ➄ ..........1 ➅ ..........1 ➆ ..........2 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - batter y .
C onnecting W ires to T erminals ANT. CONT P.CONT TEL MUTE FRONT • L FRONT • R REAR • L REAR • R – + FRONT AUX IN F M/AM antenna input Fr ont right output (Red) Fu se (10A) Wir ing harness (.
Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars J apanese cars 1 Refer to the section 'Removing the hard rubber frame' (page 30) and then remove the hard rubber frame.
Sc re wing the F aceplate on the Unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off . 1 Refer to the section 'Removing the hard rubber frame' (page 30) and then remove the hard rubber frame. 2 Drop open the faceplate by pressing the Release button.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
Tr oubleshooting Guide Disc source ? “A UX EXT” is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 4) of the sec tion on 'Safety precautions' .
T he messages shown below displa y your systems condition. EJ ECT: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ I nsert the CD. No Disc: No disc has been loaded in the disc magazine.
A udio section M aximum output power : 50 W x 4 F ull Bandwidth P ower (at less than 1% THD) : 22 W x 4 T one action Bass : 100 Hz ±10 dB M iddle : 1 kHz ±10 dB Tr eble : 10 kH z ±10 dB Pr eout lev.
An important point after buying a device Kenwood KDC-MPV7026 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-MPV7026 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-MPV7026 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-MPV7026 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-MPV7026 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-MPV7026, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-MPV7026.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-MPV7026. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-MPV7026 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
