Instruction/ maintenance manual of the product KDC-MP6025 Kenwood
Go to page of 40
KDC-X679 KDC-MP6025 KDC-MP625 CD-RECEIVER INSTR UCTION MANU AL © B64-2764-00/00 (KW) Ta ke the time to read thr ough this instruc tion manual. F amiliarity with installation and opera tion procedures will help you obtain the best performance from your new CD-receiv er .
2 | English Con t ents 2 Wa rning 3 Sa fe ty precautions 4 Notes 6 Abo ut CDs 7 Notes on playing MP3/WMA 8 G eneral fea tures 10 Pow e r Selecting the Source Volume Attenuator System Q A udio Control .
English | 3 2 W arning 2 CA UTION Use of controls or adjustments or performance of procedures other than those specified her ein may r esult in hazardous radiation exposur e. In compliance with F ederal Regulations, following are repr oductions of labels on, or inside the product r elating to laser product saf ety.
4 | English Sa fe ty precautions 2 CA UTION To preven t damage to the machine, take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity .
English | 5 A bout CD play ers/disc changers c onnected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
6 | English Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
English | 7 Handling CDs • Don ’t touch the recording surface of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD.
8 | English Notes on playing MP3/WMA KDC-X679/MP6025/MP625 can play MP3 (MPEG1, 2 A udio Layer 3)/WM A. Note, however , that the MP3/ WMA recor ding media and formats acceptable are limited. When wr iting MP3/WMA, pay attention to the following restrictions.
English | 9 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
10 | English G eneral f eatures Powe r Tu rning ON the Power Pr ess the [SRC] button. Tu rning OFF the Power Pr ess the [SRC] button for at least 1 second.
English | 11 Syst e m Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
12 | English G eneral f eatures Speaker Setting F ine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Pr ess the [SRC] button. Select the "ST ANDBY" display. 2 Enter Speaker Setting mode Pr ess the [Q] butt on.
English | 13 In MP3/WMA source Information Display S ong title & Artist name "Title/Artist" Album name & Artist name " Album/Ar tist" F older name "Folder Name" F.
14 | English G eneral f eatures Low er te x t display part selec t Y ou can select the information displayed in the lower part in Display mode "Display T ype A " or "Display T ype B" . 1 Enter display con trol mode Pr ess the [DISP] button.
English | 15 3 Exit Display contr ol mode Pr ess the [DISP] button. • When 'Dual Zone System' (page 27) is ON, L evel meter cannot be switched.
16 | English G eneral f eatures Au xiliar y Input Display Setting S electing the display when this device is switched to A uxiliary input source. 1 S elect Auxiliary input source Pr ess the [SRC] button. Select the " AUX"/ " AUX EXT" display.
English | 17 2 P ush the facepla te in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute T he audio system automatically mutes when a call comes in. W hen a call comes in "CALL " is displayed. The audio system pauses.
18 | English T uner featur es Tu ning Mode Choose the tuning mode. Pr ess the [A UTO ] button. Each time the button is pressed the Tuning mode switches as shown below . T uning mode Display O peration Au to seek " Auto 1" Automatic sear ch for a station.
English | 19 Example: Desired frequency Press butt on 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (A M) [0], [8], [1], [0] C anceling Dir ec t Acc ess T uning Pr ess the [DIRECT ] button on the remote . Sta tion Preset Memory P utting the station in the memory.
20 | English CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Open the panel to insert disc Pr ess the [ 0 ] button. 2 I nsert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else.
English | 21 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Pr ess the [SRC] button. Select the display for the disc player you want.
22 | English CD/MP3/WMA/External disc control f eatures Tr ack/File/Disc/Folder Repea t Replaying the song, disc in the Disc changer or MP3/WMA folder y ou’ re listening to . Pr ess the [REP] button. Each time the button is pressed the Repeat Pla y switches as shown below .
English | 23 • The methods for moving to other folders in the f older select mode are different fr om those in the folder search mode. See 'Notes on playing MP3/WMA ' (page 8) for details. C anceling the F older Select mode Pr ess the [F .
24 | English HD Radio control f eatures Tu n ing S electing the station. 1 S elect HD R adio source Pr ess the [SRC] button. Select the "HD RADIO" display. 2 S elect the HF band Pr ess the [FM] button. Each time the [FM] button is pr essed it switches between the HF1, HF2, and HF3 bands.
English | 25 Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
26 | English Menu system In Standby mode Secur ity C ode Because authorization by the Security Code is r equired when it’ s removed from the v ehicle, personalizing this unit is by using the Security C ode is a help in preventing theft.
English | 27 Se lectable Illumination S electing the button illumination color as green or re d. Display Setting "Button Red" T he illumination color is r ed. "Button Green" T he illumination color is gr een. Dimmer Dimming this unit’ s display automatically when the vehicle light switch is turned ON.
28 | English Menu system F unction of the KDC-X679 B. M.S. (Bass Management Sy stem) A djust the bass boost level of the external amplifier using the main unit. Display Setting "A MP B ass Flat" B ass boost level is flat . "A MP B ass +6" Bass boost level is low (+6dB).
English | 29 F unction of the KDC-X679 When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 S elect AMP Control mode Pr ess the [FM] or [AM] butt on. Select the " AMP Control" display . 2 Enter AMP Contr ol mode Pr ess the [ 4 ] or [ ¢ ] button for at least 1 second.
30 | English Basic Operations of r emote Lo ading and Replacing the battery U se two " AA "-size batteries. Slide the cover while pr essing downwards to r emove it as illustrated . I nsert the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 31 In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations .
32 | English A cc essories/ Installa tion Procedur e A cce ssories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - batter y.
English | 33 ANT. CONT TEL MUTE P.CONT FRONT • L FRONT • R REAR • L REAR • R – + C onnecting W ires to T erminals Dimmer control wire (Orange / White) To car light contr ol switch A UX right.
34 | English Fi re wall or metal support Screw (M4X8) (commercially available) Self-tapping screw (commercially available) M etal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
English | 35 Sc rew ing the F aceplate on the Unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off , screw in the provided screw s in the holes shown below . Accessory 5 Bottom panel • Never insert the screw in any other screw hole than the one specified.
36 | English Catch Lock Accessory 2 Removal tool Accessory 2 Removal tool Screw (M4X8) (commercially available) Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level .
English | 37 Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the f ollowing table f or possible problems. G eneral ? T he power does not turn ON.
38 | English Disc source ? "A UX EXT" is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 5) of the sec tion on 'Safety precautions' .
English | 39 T he messages shown below displa y your systems condition. Eject: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ I nsert the CD. No Disc: No disc has been loaded in the disc magazine.
40 | English Specifications subject to change without notice. Specifications FM tuner sec tion Fr equenc y range (200 kHz space) : 87.9 MHz – 107.9 MH z Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
An important point after buying a device Kenwood KDC-MP6025 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-MP6025 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-MP6025 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-MP6025 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-MP6025 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-MP6025, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-MP6025.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-MP6025. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-MP6025 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
