Instruction/ maintenance manual of the product KDC-M7024 Kenwood
Go to page of 52
KDC-M7024 KDC-7024 © B64-2468-00/01 (EV/E2V) CD-RECEIVER INSTR UCTION MANU AL COMPACT DIGITAL AUDIO KDC-M7024(EV) Cover_r2 03.1.15 10:04 AM Page 1.
— 2 — English Contents Safety precautions.............................3 About GSM Hands Free Unit .............5 Notes on playing MP3 .......................6 Notes on Multi-function Key System .....................................8 About CDs ....
— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.
— 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button.
— 5 — About GSM Hands Free Unit The marking of products using lasers (Except for some areas) The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class.
— 6 — English Notes on playing MP3 (KDC-M7024) This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note, however , that the MP3 recording media and formats acceptable are limited. When writing MP3, pay attention to the following restrictions. Acceptable media The MP3 recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW .
— 7 — MP3 playing order When selected for play , Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
English Notes on Multi-function Key System Multi-function Key System serves to control various functions with the [2] — [5] buttons. The basic operation of the Multi-function Key System is described below .
— 9 — About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD.
Press the [SRC] button. Source required Display T uner "TUNER" CD "CD" External disc ( Optional accessory ) "DISC CH"/"CD2" Auxiliary input ( Optional accessory.
Y ou can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button.
1st section [2] button Adjustment Item Display Range Bass Center Frequency "Bass F" 60/70/80/100 or 150 Hz Bass level "Bass" –8 — +8 Bass Q Factor "Bass Q" 1.00/1.25/1.50/2.00 Bass Extend "Bass EXT" ON/OFF 5 Select the Audio Control item for adjustment Press the [2] — [5] button.
3rd section [2] button Adjustment Item Display Range V olume offset "V -Offset" –8 — ±0 V olume offset: Each source's volume can be set as a difference from the basic volume.
Switching the text display . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [3] button. Refer to <Notes on Multi-function Key System> (page 8). 2 Enter display control mode Press the [3] ("DISP") button.
4 Exit Display Control mode Press the [RTN] button. If the Disc title, T rack title, Song title & Artist name, or Album name & Artist name is selected when the disc which does not have Disc title, T rack title, Song title, Album name, or Artist name is played, track number and play time are displayed.
Setting the angle or back-forward position of the control panel. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "PNL" is displayed above the [4] button. Panel Position Setting Tu rning the Non-fading output ON or OFF .
2 Remove the Backpanel forward. When <DSI (Disabled System Indicator)> (page 37) is set to ON, DSI blinks. • The back panel is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the back panel in its special storage case while detached.
Makes the sound different for the front channel and rear channel. 1 Select the source Press the [SRC] button. Select the source sound to be output from the Dual zone channel. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "2-ZN" is displayed above the [5] button.
Dual Zone System Rear: The sound of the source selected with step 1 is outputted from rear , and the sound of the source selected with step 6 is outputted from front. Dual Zone System Front: The sound of the source selected with step 1 is outputted from front, and the sound of the source selected with step 6 is outputted from rear .
Putting the station in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4 ] or [ ¢ ] button. 3 Select the key function section Press the [NEXT] button. Repeatedly press the button until the function item is not displayed above the [2] — [5] button.
Calling up the stations in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until the function item is not displayed above the [2] — [5] button. Refer to <Notes on Multi-function Key System> (page 8).
Scrolling the displayed radio text. Press the [SCRL] button. Radio T ext Scroll Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button is pressed the T raffic Information function turns ON or OFF .
21. Social Affairs "Social" 22. Religion "Religion" 23. Phone In "Phone In" 24. T ravel "T ravel" 25. Leisure "Leisure" 26. Jazz Music "Jazz" 27. Country Music "Country" 28. National Music "Nation M" 29.
Language Display English "English" French "French" Swedish "Swedish" German "German" 4 Exit Changing Language mode Press the [SCRL] button. Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program T ype)> (page 23).
CD/MP3/External disc control features — 25 — NAME.S NF RTN NEXT DAB 2-5 SRC NEXT 4 ¢ AM/ DISC- FM/ DISC+ SCRL/ NAME.S 38 0 T rack number Disc number T rack time IN indicator KDC-M7024_U.
Fast Forwarding Hold down on the [ ¢ ] button. Release your finger to play the disc at that point. Reversing Hold down on the [ 4 ] button. Release your finger to play the disc at that point. Fast Forwarding and Reversing Playing discs set in the optional accessory disc player connected to this unit.
Replaying the song, disc in the Disc changer or MP3 folder you're listening to. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "REP" is displayed above the [4] button. Refer to <Notes on Multi-function Key System> (page 8).
Quickly selecting the folder you want to listen to. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "FSEL" is displayed above the [5] button. Refer to <Notes on Multi-function Key System> (page 8).
<Folder name display> Displays the current folder name. 3 Select the folder level Press the [FM] or [AM] button. With the [FM] button you move 1 level down and with the [AM] button 1 level up. Selecting a folder in the same level Press the [ 4 ] or [ ¢ ] button.
Scrolling the displayed CD text, MP3 text, or MD title. Press the [SCRL] button. T ext/T itle Scroll CD/MP3/External disc control features — 30 — English KDC-M7024_U.
Received calls can be answered when a GSM Hands Free Unit (optional accessory) is connected to this unit. 1 When a Call is Received "HF CALL" will be displayed. 2 Accept a call Press the [1], [3] — [6] or [NEXT] button. Switching between the Name and T elephone Number Press the [TI] button.
Inputting the telephone number with number buttons on the optional remote, and dialing. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "H-F" is displayed above the [2] button. Refer to <Notes on Multi-function Key System> (page 8).
Synchronizing the data in this unit with the data in the GSM telephone. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "SYNC" is displayed above the [3] button. Refer to <Notes on Multi-function Key System> (page 8).
Because authorization by the Security Code is required when it's Security Code <In Standby mode> Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation.
Selecting the speaker to output the Phone voice. Display Setting "HFSP ALL" Phone voice sent to the front and rear speaker . "HFSP FR" Phone voice send to the front right speaker . "HFSP FL" Phone voice sent to the front left speaker .
This adjustment can be done when the <Synchronize Clock> (page 37) is set as OFF . 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "Clock Adjust" display . 2 Enter Clock Adjust mode Press the [ 4 ] or [ ¢ ] button for at least 1 second.
Dimming this unit's display automatically when the vehicle light switch is turned ON. Display Setting "Dimmer ON" The display dims. "Dimmer OFF" The display doesn't dim.
T oggles ON or OFF the mute control on the built-in amplifier . Tu rning ON this control enhances the preout quality . Display Setting "AMP Mute OFF" The built-in amplifier activates. "AMP Mute ON" The built-in amplifier deactivates.
Only stations whose reception is good are searched for in auto seek tuning. Display Setting "Local.S OFF" The local seek function is OFF . "Local.
Noise can be reduced when stereo broadcasts are received as monaural. Monaural Reception <In FM reception> When the TI function is ON and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically .
Function of the KDC-M7024 When there is a problem on playing a CD with special format, this setting play the CD by force. Display Setting "CD READ 1" Play CD and MP3. "CD READ 2" Play CD by force. Setting "CD READ 2" cannot play MP3.
.........2 English — 42 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. .........1 1 .........1 3 1. T o prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery.
Connecting Wires to T erminals — 43 — TEL MUTE EXT.CONT P.CONT ANT.CONT. 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 FRONT REAR NON FADING Front left output (White) 14 Front right output (Red) 13 Rear right o.
English — 44 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
— 45 — Removing the Unit •T o attach this unit, make sure the front of the control panel faces you and fit it into the mounting sleeve by pressing the four corners of the hard rubber frame at the same time.
English — 46 — Removing the Unit Accessory 2 Removal tool Screw (M4X8) (commercially available) ■ Removing the Unit 4 Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. Be careful to avoid injury from the catch pins on the removal tool.
— 47 — — 47 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown.
English — 48 — — 48 — ? The T ouch Sensor T one doesn’t sound. 34 ✔ The preout jack is being used. ☞ The T ouch Sensor T one can’t be output from the preout jack. ? Even though Synchronize Clock is ON, the clock can’ t be adjusted. 35 ✔ The received RDS station isn’t sending time data.
— 49 — — 49 — MP3 source ? Cannot play an MP3. 67 ✔ The media is scratched or dirty . 69 ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 9). ? The sound skips when an MP3 is being played. 73-1 ✔ The media is scratched or dirty .
English — 50 — — 50 — The messages shown below display your systems condition. EJECT : No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. E01 ➪ Load the disc magazine properly . No CD in the unit. ➪ Insert the CD.
— 51 — — 51 — Specifications FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ............................... 0.7 µV /75 Ω Quieting Sensitivity (S/N = 46dB) ...............
KDC-M7024_U.S_r2 03.1.15 10:12 AM Page 52.
An important point after buying a device Kenwood KDC-M7024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-M7024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-M7024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-M7024 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-M7024 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-M7024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-M7024.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-M7024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-M7024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
