Instruction/ maintenance manual of the product KDC-D300 Kenwood
Go to page of 15
KDC-D300 © B64-1430-00 (E) (MC) 00/2 1 99/12 11 10 9 8 7 6 5 4 3 2 1 COMPACT DIGITAL AUDIO CD-PLA YER INSTR UCTION MANU AL.
Contents — 2 — English Before use Safety Precautions ........................................................................3 Handling Compact Discs ...............................................................5 Operations Buttons and Display .
— 3 — To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
— 4 — English Saf ety pr ecautions Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.
— 5 — Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged.
— 6 — English Operations INTEGRATED QUAD 1 BIT D/A CONVERTER KDC-D300 CD PLAYER DIGITAL OPTIMUM SERVO CONTROL 11BAND11BAND SPECTRUM ANALYZER 60 120 250 380 500 750 1k 2k 4k 8k 16k DPAC DISP MENU Buttons and Display The various CD operations are performed with the Centre unit.
— 7 — You can select the display to enjoy sounds with eyes. Operation for "N" Setting: Each time you press the DISP button, the spectrum analyzer display switches as following table; Operation for "O" Setting: Selecting CD play source mode.
— 8 — English Operations Display Level Adjustment You can adjust the spectrum analyzer level. Selecting CD play source mode. Press the DISP button for at least one second. Press either the ¢ or 4 button on the centre unit. Press the ¢ button:Level increased.
Reattaching Faceplate: Hold the faceplate so that the operation face faces the front toward you and press until it locks. The faceplate will be set and the unit will be operational. When there is difficulty in setting the faceplate, align the depression on the left side of the faceplate with the shaft of the unit, then lock.
— 10 — English The O-N switch should be set according to the Centre unit in use as well as to the connected models. When the centre unit is compatible with the "N"-operation, set the O-N switch to "N".
— 11 — Metal mounting strap (commercially available) Self-tapping screw (commercially available) Firewall or metal support Accessory 2 Installation ■ Installation Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
— 12 — English When the lower level is removed, remove the upper two locations. 2 The frame can be removed from the top side in the same manner. NOTE Catch Lock Engage the catch pins on the removal tool and remove the two locks on the lower level.
— 13 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM No sound can be heard, or the volume is low.
Troubleshooting Guide — 14 — English The following messages are displayed on the centre unit when certain problems are occurring in your system. Take the recommended actions. No CD in the unit. Insert the CD. ] E-01 The CD is quite dirty. The CD is upside-down.
— 15 — CD player section Laser diode .................................................... GaAlAs ( λ =780 nm) Digital filter (D/A) ...................................... 8 Times Over Sampling D/A Converter ........................................
An important point after buying a device Kenwood KDC-D300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-D300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-D300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-D300 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-D300 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-D300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-D300.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-D300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-D300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
