Instruction/ maintenance manual of the product KDC-C519FM Kenwood
Go to page of 20
©B64-2352-00/00 (MW) COMPACT DIGITAL AUDIO CD AUTOCHANGER / CONTROLLER / FM MODULATOR SYSTEM KDC-C519FM INSTR UCTION MANU AL KDC-C519FM(M) Cover 02.9.
— 2 — English Contents Before use Safety Precautions ........................................................................3 Handling Compact Discs ...............................................................5 Loading Compact Discs ..........
— 3 — Take the following precautions to prevent fire and avoid personal injury: •When extending the ignition wire, battery wire, or ground wire, use 0.75mm 2 (AWG18) or larger automotive grade wire to avoid wire deterioration or damage to the covering.
— 4 — English Safety Precautions MASK R03 (“AA”- size) Do not set the remote on hot places such as above the dashboard. Loading and Replacing the Batteries: Use two "AAA" batteries. Slide the cover while pressing downwards to remove it as illustrated.
— 5 — Handling Compact Discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged.
' — 6 — English ' ' ' Make sure the disc magazine is the right way up with the Kenwood logo on the top.Pull the tray out by the projection. Insert the magazine into the CD changer until it clicks. Open the CD changer door. Place the disc on the tray with the label facing upwards.
Playing CDs : Press the PWR (POWER...Remote ) button. The power goes ON and the CD play start. When the unit receives any signal from the remote controller, the mark lights up. When the player reaches the end of the last track on the disc you are playing, it will shift automatically to the first track on the next disc.
Using the remote, directly input the track number that you want to listen to. Using the number buttons on the remote, input the number of the track that you want to listen to.
Using the remote, directly input the disc number that you want to listen to. Using the number buttons on the remote, input the number of the disc that you want to listen to. The selected disc number will blink in the display for 10 seconds. If you make no further input in the 10-second period, the number entry mode will automatically be canceled.
Play the tracks on all the discs in the disc changer in random order. Press the M.RDM button to switch magazine random play on and off. The M.RDM indicator lights up when magazine random play is turned on. The disc and track numbers will change over and over in the display as the next track is being selected.
— 11 — To set the frequency change mode Press the REP button for at least three seconds. The FREQ indicator will light up and the currently set frequency will be displayed. • The initial value is 88.3MHz. • If this function is on, the functions other than power on / off, reset, and modulation level / dynamic control, cannot be operated.
Dynamic control The unit comes with the prevention of distortion function to reduce sound distortion. If the sound is distorted severely, press the + button on the display unit and then set the function to "2" (ON). If the prevention of distortion function is set to "2" (ON), the sound extension is reduced.
Accessories .........1 1 .........4 2 .........4 3 .........1 4 External view ......... Number of items .........1 5 .........2 6 The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above.
— 14 — CD AUTO CHANGER CONTROLLER REP RDM 3 - + 4¢ PWR ' M.RDM M.RDM D.REP D.REP TRACK DISC 8 / D. D. SCN SCN MHz MHz DISC DISC TRACK TRACK FREQ FREQ LEVEL LEVEL 9 0 4 5 0 To prevent fire wh.
90 0 45 90 0 45 Installation Use the holes marked ( ¶ ) to install the unit. Use the holes marked ( ¶ ) to install the unit. Horizontal installation ■ Vertical installation ■ Side view 90 0 45 90 0 45 9 0 0 4 5 1 3 2 ø4 90 45 0 1 3 2 ø4 — 15 — Use the holes marked ( ¶ ) to install the unit.
Installation Installation of Display unit ■ • Installation without using the trim mount plate 7 Attach one velcro to the slanted-line of the the display units as shown above, and attach the other velcro to the parts where you wish to attach the display units.
— 17 — Troubleshooting guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM Power button is not turned ON.
English SOLUTION POSSIBLE CAUSE PROBLEM Nothing appears on the display. Sound distortion. The disc is dirty or damaged. If sound skips at the same part, the disc is faulty. Check and, if possible, clean the disc. See "Cleaning CDs" (Page 5).
— 19 — The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. 01 E: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. Load the disc magazine properly.
Disc section Laser Diode.....................................................GaAlAs ( λ =780 nm) Digital Filter (D/A) ......................................8 Times Over Sampling D/A Converter ..........................................................
An important point after buying a device Kenwood KDC-C519FM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-C519FM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-C519FM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-C519FM you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-C519FM will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-C519FM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-C519FM.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-C519FM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-C519FM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
