Instruction/ maintenance manual of the product KDC-4051UM Kenwood
Go to page of 19
KDC-U449 KDC-U3049 KDC-U349 KDC-4051UM CD-RECEIVER INSTRUCTION MANUAL GET0691-001A (MW/M2W/M0/M20) © 2010 Kenwood Corporation All Rights Reserved. Declaration of Conformity with regard to the EMC Dir.
2 C ONTENTS Safety 2 Preparation 3 How to attach/detach the faceplate How to reset your unit How to prepare the remote controller (RC-405) Basic operations 4 Getting started 6 Canceling the display de.
3 ENGLISH Preparation How to attach/detach the faceplate 2 1 1 2 Do not expose the faceplate to direct sunlight, excessive heat, or humidity . Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached.
4 KDC-U449: KDC-U3049/ KDC-U349/ KDC-4051UM: The following indicator lights up when... ST : A stereo broadcast is r eceived. IN : A disc is in the unit. KDC-U449 only: ATT (blink) : The sound attenuates. EQ : [SYSTEM Q] is set to an EQ mode other than [NATURAL] .
5 ENGLISH When you press or hold the f ollowing button(s)... Main unit Remote controller General operation SRC — T urns on. T urns off if pressed and held. SRC Selects the available sources ( TUNER, USB or iPod, CD , AUX, ST ANDBY ), if the power is turned on.
6 Getting started Canceling the display demonstration The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] [PRESS] [VOLUME KNOB] 1 Press the volume knob.
7 ENGLISH Continued... Item Selectable setting (Preset: *) PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2). ; MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW/ SW1/ SW2).
8 Changing the frequency steps (KDC-U449/ KDC-U3049/ KDC-U349 only) Y ou can change the frequency step of FM/ MW: FM : 50 kHz to 200 kHz MW : 9 kHz to 10 kHz 1 Press and hold SRC to turn off the power. 2 While pressing number buttons 1 and 5 (MEMO MY LIST) , press SRC .
9 ENGLISH For KDC-4051UM: Available Program Type: SPEECH MUSIC NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M (music) ROCK M (music) EASY M (music) LIGHT M (music) CLASSICS OTHER M.
10 Start playing a disc 1 Press SRC to turn on the power. 2 Insert a disc into the loading slot. Playback starts automatically. 3 Press number button 6 ( ) to resume/pause playback (if necessary). Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.
11 ENGLISH T o return to the root folder (or first track f or audio CD), press BAND . T o return to the previous folder , press . T o cancel the Music Search mode, press and hold . < or > on the display indicates that preceded/next item is available.
12 Alphabet Search and My Playlist for iPod Selecting a song by alphabet 1 Press to enter Music Search mode. “SEARCH” appears. 2 Turn the volume knob to select a category, then press to confirm. 3 Press again to enter alphabet search mode. “SEARCH < – – – >” appears.
13 ENGLISH Continued... Functions of KDC-U449 with iPod About compatible iPod/iPhone Made for – iPod t ouch (1st, 2nd, and 3rd generation) – iPod classic – iP od with video – iP od nano (1st, .
14 Item Selectable setting (Preset: *) MID ADJUST MID CTR FRQ/ MID C FRQ: 0.5K/ 1.0K */ 1.5K/ 2.5K: Selects the center frequency. MID LEVEL: –8 — +8 (Preset: 0): Adjusts the level. MID Q FACTOR/ MID Q FCTR: 0.75/ 1.00 */ 1.25: Adjusts the Q factor.
15 ENGLISH Troubleshooting Symptom Remedy/Cause Sound cannot be heard. Adjust the volume to the optimum level. / Check the cords and connections. “PROTECT” appears and no operations can be done. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit.
16 Installation/connection Part list: A F aceplate.............................................................. (×1) B Escutcheon ......................................................... (×1) C Mounting sleeve .....................................
17 ENGLISH KDC-4051UM KDC-U449/ KDC-U3049/ KDC-U349 KDC-U449 KDC-U3049/ KDC-U349/ KDC-4051UM Wiring connection Fuse (10 A) Antenna terminal (JASO) Rear/subwoofer output terminals Front output terminals Rear/subwoofer output terminals Blue/White Brown Blue To the terminal that is grounded when either the telephone rings or during conversation.
18 Installing the unit Removing the unit 2 1 Connect the wiring harness to the unit. Other wiring connection has been completed earlier. (page 17) Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the top side.) Dashboard of your car T: Toyota cars N: Nissan cars 1 Detach the faceplate.
19 ENGLISH CD player section Laser diode: GaAIAs Digital filter (D/A): 8 Times Over Sampling D/A converter: 24 Bit Specifications Spindle speed: 500 rpm — 200 rpm (CL V ) Wow & Flutter: Below Measurable Limit Frequency response (±1 dB): 20 Hz — 20 kH z Total harmonic distortion (1 kHz): 0.
An important point after buying a device Kenwood KDC-4051UM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-4051UM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-4051UM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-4051UM you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-4051UM will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-4051UM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-4051UM.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-4051UM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-4051UM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
