Instruction/ maintenance manual of the product KDC-3054UG Kenwood
Go to page of 23
KDC-4554U KDC-4054UB KDC-4054UR KDC-3454UQ KDC-3354UGY KDC-3254URY KDC-3054UG KDC-3054UR KDC-3054URY KDC-316UR CD-RECEIVER INSTRUCTION MANUAL CD-RECEIVER BEDIENUNGSANLEITUNG РAДИОПРИЕMНИК .
2 Safety 3 Preparation 4 How to attach/detach the faceplate How to reset your unit Basic operations 5 Getting started 7 Canceling the display demonstration Setting the demonstration mode Adjusting the.
3 ENGLISH Safety WARNING Stop the car before operating the unit. Important to know... T o pr event a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Caution: Adjust the volume so that you can hear sounds outside the car .
4 Preparation How to attach/detach the faceplate 2 1 1 2 Do not expose the faceplate to direct sunlight, excessive heat, or humidity . Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached.
5 ENGLISH The following indicator lights up when... ST : A stereo broadcast is r eceived (FM). IN : A disc is in the unit. TI : T raffic Information function is turned on. RDS : Radio Data System ser vice is available. For : EQ : [PRESET EQ] is set to an EQ mode other than [NATURAL] .
6 When you press or hold the f ollowing button(s)... Button General operation SRC T urns on. T urns off if pressed and held. Selects the available sources ( TUNER, USB/ iPod, CD , AUX, ST ANDBY ), if the power is turned on. • If the source is ready, playback also starts.
7 ENGLISH Getting started Canceling the display demonstration The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] [PRESS] [VOLUME KNOB] 1 Press the volume knob.
8 Listening to the radio 1 Press SRC to select “TUNER.” 2 Press repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW). 3 Press 4 / ¢ to search for a station. Item Selectable setting (Preset: *) PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW).
9 ENGLISH Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS] , then press to enter. 3 Turn the volume knob to make a selection, then press to confirm.
10 Start playing a disc 1 Press SRC to turn on the power. 2 Insert a disc into the loading slot. Playback starts automatically. 3 Press number button 6 ( ) to resume/pause playback (if necessary). Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.
11 ENGLISH Selecting Repeat Play Press number button 4 (REP) repeatedly to make a selection. Audio CD : TRACK/ TRAC (track) REPEAT, REPEAT OFF AAC/MP3/WMA : FILE REPEAT, FOLDER/ FOLD (folder) REPEAT, REPEAT OFF iPod : FILE REPEAT, REPEAT OFF Selecting Random Play Press number button 3 (ALL RDM) or repeatedly to make a selection.
12 About compatible iPod/iPhone Made for – iPod touch (1st, 2nd, 3rd, and 4th generation) – iPod classic – iPod with video – iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) – iPhone 4 – iPhone 3GS – iPhone 3G – iPhone For the latest compatible list and software version of iPod/iPhone, see: www.
13 ENGLISH Preparation : Make sure [ON] is selected for [BUILT-IN AUX] / [BUILTIN AUX] . (page 7, 8) 3.5 mm stereo mini plug (commercially available) Portable audio device (commercially available) Auxiliary input jack Listening to the other external components 1 Press SRC to select “AUX.
14 Caution: Do not set the remote control in hot places such as on the dashboard. Lithium batter y . Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. The battery pack or batteries shall not be exposed to excessive heat such sunshine , fire or the like.
15 ENGLISH 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [AUDIO CONTROL] / [AUDIO CTRL] or [SETTINGS] , then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection.
16 [AUDIO CONTROL] / [AUDIO CTRL] : While listening to any source ex cept in ST ANDBY state... Item Selectable setting (Preset: *) DETAILED SET/ DETAIL SET LPF SUBWOOFER/ LPF SUB-W Except for : THROUGH *: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.
17 ENGLISH [SETTINGS] Item Selectable setting (Preset: *) DISPLAY (for ) DISP DIMMER ON: Dims the display illumination. ; OFF *: Cancels. TEXT SCROLL AUTO */ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF: Cancels.
18 Symptom Remedy/Cause “COPY PRO” appears. A copy-protected file is played. “READ ERROR” appears. Copy the files and folders for the USB device again. If the error message is still displayed, initialize the USB device or use other USB devices.
19 ENGLISH Installation/connection Part list: A F aceplate.............................................................. (×1) B Escutcheon ......................................................... (×1) C Mounting sleeve .............................
20 Wiring connection FRONT RL REAR/SW RL REAR/SW REMOTE CONT STEERING WHEEL REMOTE INPUT MUTE P . CONT ANT CONT For : Fuse (10 A) Antenna terminal (JASO) Light blue/yellow (Steering remote control wir.
21 ENGLISH For : MUTE P . CONT ANT CONT Fuse (10 A) Antenna terminal (JASO) Blue/White Brown Blue To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.
22 Installing the unit Removing the unit 2 1 Connect the wiring harness to the unit. Other wiring connection has been completed earlier . (page 20, 21) Before attaching , make sure the direction of the escutcheon is correct. ( Wider hooks on the top side.
23 ENGLISH FM tuner section Frequency range: FM1/ FM2/ FM3 (50 kHz space): 87.5 MHz — 108.0 MHz For : FM1/ FM2 (50 kHz space): 87.5 MHz — 108.0 MH z FM3 (30 kHz space): 65.00 MHz — 74.00 MH z Usable sensitivity (S/N= 26 dB): 1.0 μV/75 Ω Quieting sensitivity (DIN S/N = 46 dB): 2.
An important point after buying a device Kenwood KDC-3054UG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-3054UG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-3054UG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-3054UG you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-3054UG will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-3054UG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-3054UG.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-3054UG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-3054UG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
