Instruction/ maintenance manual of the product KDC-2031SA/G Kenwood
Go to page of 24
CD-RECEIVER KDC-2031SA/G INSTR UCTION MANU AL © B64-2937-00/00 (EW/E2W) B64-2937-00_English_r1.indd 1 B64-2937-00_English_r1.indd 1 04.10.6 1:23:13 PM 04.
2 | English Con tents Safety precautions 3 Notes 4 About CDs 5 General featur es 6 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Clock Display Adjust.
English | 3 Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot If you tr y to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. Lens F ogging Right after you turn on the car heater in cold weather , dew or condensation may form on the lens in the CD player of the unit.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button.
English | 5 Handling CDs • Don ’t touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
6 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
English | 7 Sy stem Q Y ou can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [ Q] button. Each time the button is pressed, the sound setting switches.
8 | English General fea tures Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standb y Press the [SRC] button. Select the "STBY" display. 2 Enter Speak er Setting mode Press the [VOL] knob.
English | 9 TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
10 | English T uner features T uning Mode Choose the tuning mode. Press the contr ol knob. Each time the knob is pressed, the T uning mode switches as shown below . T uning mode Display Operation Auto seek " AUT O 1" indicator Automatic sear ch for a station.
English | 11 Station Pr eset Memor y Putting the station in the memory. 1 Select the band Push the Contr ol knob to [FM] or [AM]. 2 Select the frequency to put in the memor y Push the Contr ol knob to [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
12 | English CD play er featur es Playing CD When a disc is inserted Press the [SRC] button. Select the "CD" display. • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the contr ol knob. Each time the knob is pressed, it pauses and plays.
English | 13 T rack Repeat Replaying the song you ’r e listening to. Press the [REP] button. Each time the button is pressed, the Track Repeat turns ON and OFF . When it's ON, the "REP" indicator is ON. Scan Play Playing the first part of each song on the disc you are listening to and sear ching for the song you want to listen to .
• If your vehicle’ s ignition does not have an ACC position, or if the ignition wire is connected to a power sour ce with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition).
English | 15 Connecting W ires to T erminals 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 P.CONT ANT.CONT REAR L R MUTE Rear right output (Red) Rear left output ( White) Battery wire ( Y ellow) Ignition wire (Red).
16 | English Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White Power Control.
English | 17 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
18 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the r emoval tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is r emoved, remove the lower two locations.
English | 19 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
20 | English Disc source ? The specified disc does not play , but another one plays instead . ✔ The specified CD is quit e dir ty. ☞ Clean the CD. ✔ The disc is sev erely scratched. ☞ T r y another disc instead. ? A CD ejects as soon as it is loaded.
English | 21 FM tuner section Fr equency range (50 kH z space) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 26dB) : 0.7 µV /75 Ω) Quieting Sensitivity (S/N = 46dB) : 1.
22 | English B64-2937-00_English_r1.indd 22 B64-2937-00_English_r1.indd 22 04.10.6 1:23:21 PM 04.10.6 1:23:21 PM.
English | 23 B64-2937-00_English_r1.indd 23 B64-2937-00_English_r1.indd 23 04.10.6 1:23:22 PM 04.10.6 1:23:22 PM.
B64-2937-00_English_r1.indd 24 B64-2937-00_English_r1.indd 24 04.10.6 1:23:22 PM 04.10.6 1:23:22 PM.
An important point after buying a device Kenwood KDC-2031SA/G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KDC-2031SA/G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KDC-2031SA/G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KDC-2031SA/G you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KDC-2031SA/G will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KDC-2031SA/G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KDC-2031SA/G.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KDC-2031SA/G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KDC-2031SA/G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
